mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-01-12 01:20:14 +00:00
148 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
David Gow
|
c31f4aa8fe |
kunit: Enforce task execution in {soft,hard}irq contexts
The kunit_run_irq_test() helper allows a function to be run in hardirq
and softirq contexts (in addition to the task context). It does this by
running the user-provided function concurrently in the three contexts,
until either a timeout has expired or a number of iterations have
completed in the normal task context.
However, on setups where the initialisation of the hardirq and softirq
contexts (or, indeed, the scheduling of those tasks) is significantly
slower than the function execution, it's possible for that number of
iterations to be exceeded before any runs in irq contexts actually
occur. This occurs with the polyval.test_polyval_preparekey_in_irqs
test, which runs 20000 iterations of the relatively fast preparekey
function, and therefore fails often under many UML, 32-bit arm, m68k and
other environments.
Instead, ensure that the max_iterations limit counts executions in all
three contexts, and requires at least one of each. This will cause the
test to continue iterating until at least the irq contexts have been
tested, or the 1s wall-clock limit has been exceeded. This causes the
test to pass in all of my environments.
In so doing, we also update the task counters to atomic ints, to better
match both the 'int' max_iterations input, and to ensure they are
correctly updated across contexts.
Finally, we also fix a few potential assertion messages to be
less-specific to the original crypto usecases.
Fixes: 950a81224e8b ("lib/crypto: tests: Add hash-test-template.h and gen-hash-testvecs.py")
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20251219085259.1163048-1-davidgow@google.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
||
|
Linus Torvalds
|
30bbcb4470 |
linux_kselftest-kunit-6.18-rc1
- A seven patch series adds a new parameterized test features
KUnit parameterized tests currently support two primary methods for
getting parameters:
1. Defining custom logic within a generate_params() function.
2. Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC()
macros with a pre-defined static array and passing
the created *_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating parameters
sequentially via generate_params() is inefficient or overly complex.
These limitations are fixed with a parameterized test method.
- Fixes issues in kunit build artifacts cleanup,
- Fixes parsing skipped test problem in kselftest framework,
- Enables PCI on UML without triggering WARN()
- a few other fixes and adds support for new configs such as MIPS
-----BEGIN PGP SIGNATURE-----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=VfHu
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- New parameterized test features
KUnit parameterized tests supported two primary methods for getting
parameters:
- Defining custom logic within a generate_params() function.
- Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC() macros
with a pre-defined static array and passing the created
*_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating
parameters sequentially via generate_params() is inefficient or
overly complex.
These limitations are fixed with a parameterized test method
- Fix issues in kunit build artifacts cleanup
- Fix parsing skipped test problem in kselftest framework
- Enable PCI on UML without triggering WARN()
- a few other fixes and adds support for new configs such as MIPS
* tag 'linux_kselftest-kunit-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Extend kconfig help text for KUNIT_UML_PCI
rust: kunit: allow `cfg` on `test`s
kunit: qemu_configs: Add MIPS configurations
kunit: Enable PCI on UML without triggering WARN()
Documentation: kunit: Document new parameterized test features
kunit: Add example parameterized test with direct dynamic parameter array setup
kunit: Add example parameterized test with shared resource management using the Resource API
kunit: Enable direct registration of parameter arrays to a KUnit test
kunit: Pass parameterized test context to generate_params()
kunit: Introduce param_init/exit for parameterized test context management
kunit: Add parent kunit for parameterized test context
kunit: tool: Accept --raw_output=full as an alias of 'all'
kunit: tool: Parse skipped tests from kselftest.h
kunit: Always descend into kunit directory during build
|
||
|
Marie Zhussupova
|
b820b9077b |
kunit: Enable direct registration of parameter arrays to a KUnit test
KUnit parameterized tests currently support two primary methods f
or getting parameters:
1. Defining custom logic within a generate_params() function.
2. Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC()
macros with a pre-defined static array and passing
the created *_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating parameters
sequentially via generate_params() is inefficient or overly complex.
This patch addresses these limitations by adding a new `params_array`
field to `struct kunit`, of the type `kunit_params`. The
`struct kunit_params` is designed to store the parameter array itself,
along with essential metadata including the parameter count, parameter
size, and a get_description() function for providing custom descriptions
for individual parameters.
The `params_array` field can be populated by calling the new
kunit_register_params_array() macro from within a param_init() function.
This will register the array as part of the parameterized test context.
The user will then need to pass kunit_array_gen_params() to the
KUNIT_CASE_PARAM_WITH_INIT() macro as the generator function, if not
providing their own. kunit_array_gen_params() is a KUnit helper that will
use the registered array to generate parameters.
The arrays passed to KUNIT_ARRAY_PARAM(,DESC) will also be registered to
the parameterized test context for consistency as well as for higher
availability of the parameter count that will be used for outputting a KTAP
test plan for a parameterized test.
This modification provides greater flexibility to the KUnit framework,
allowing testers to easily register and utilize both dynamic and static
parameter arrays.
Link: https://lore.kernel.org/r/20250826091341.1427123-5-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
[Only output the test plan if using kunit_array_gen_params --David]
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
|
Marie Zhussupova
|
b9a214b5f6 |
kunit: Pass parameterized test context to generate_params()
To enable more complex parameterized testing scenarios, the generate_params() function needs additional context beyond just the previously generated parameter. This patch modifies the generate_params() function signature to include an extra `struct kunit *test` argument, giving test users access to the parameterized test context when generating parameters. The `struct kunit *test` argument was added as the first parameter to the function signature as it aligns with the convention of other KUnit functions that accept `struct kunit *test` first. This also mirrors the "this" or "self" reference found in object-oriented programming languages. This patch also modifies xe_pci_live_device_gen_param() in xe_pci.c and nthreads_gen_params() in kcsan_test.c to reflect this signature change. Link: https://lore.kernel.org/r/20250826091341.1427123-4-davidgow@google.com Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Rae Moar <rmoar@google.com> Acked-by: Marco Elver <elver@google.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Marie Zhussupova <marievic@google.com> [Catch some additional gen_params signatures in drm/xe/tests --David] Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Marie Zhussupova
|
241423580e |
kunit: Introduce param_init/exit for parameterized test context management
Add (*param_init) and (*param_exit) function pointers to `struct kunit_case`. Users will be able to set them via the new KUNIT_CASE_PARAM_WITH_INIT() macro. param_init/exit will be invoked by kunit_run_tests() once before and once after the parameterized test, respectively. They will receive the `struct kunit` that holds the parameterized test context; facilitating init and exit for shared state. This patch also sets param_init/exit to None in rust/kernel/kunit.rs. Link: https://lore.kernel.org/r/20250826091341.1427123-3-davidgow@google.com Reviewed-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Marie Zhussupova <marievic@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Marie Zhussupova
|
4b59300ba4 |
kunit: Add parent kunit for parameterized test context
Currently, KUnit parameterized tests lack a mechanism to share resources across parameter runs because the same `struct kunit` instance is cleaned up and reused for each run. This patch introduces parameterized test context, enabling test users to share resources between parameter runs. It also allows setting up resources that need to be available for all parameter runs only once, which is helpful in cases where setup is expensive. To establish a parameterized test context, this patch adds a parent pointer field to `struct kunit`. This allows resources added to the parent `struct kunit` to be shared and accessible across all parameter runs. In kunit_run_tests(), the default `struct kunit` created is now designated to act as the parameterized test context whenever a test is parameterized. Subsequently, a new `struct kunit` is made for each parameter run, and its parent pointer is set to the `struct kunit` that holds the parameterized test context. Link: https://lore.kernel.org/r/20250826091341.1427123-2-davidgow@google.com Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Rae Moar <rmoar@google.com> Signed-off-by: Marie Zhussupova <marievic@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Eric Biggers
|
b41dc83f07 |
kunit, lib/crypto: Move run_irq_test() to common header
Rename run_irq_test() to kunit_run_irq_test() and move it to a public header so that it can be reused by crc_kunit. Link: https://lore.kernel.org/r/20250811182631.376302-2-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> |
||
|
Linus Torvalds
|
6f46e6fb4e |
linux_kselftest-kunit-6.17-rc1
Corrects MODULE_IMPORT_NS() syntax documentation, makes kunit_test timeout
configurable via a module parameter and a Kconfig option, fixes longest
symbol length test, adds a test for static stub, and adjusts kunit_test
timeout based on test_{suite,case} speed.
-----BEGIN PGP SIGNATURE-----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=WIJH
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"Correct MODULE_IMPORT_NS() syntax documentation, make kunit_test
timeout configurable via a module parameter and a Kconfig option, fix
longest symbol length test, add a test for static stub, and adjust
kunit_test timeout based on test_{suite,case} speed"
* tag 'linux_kselftest-kunit-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix longest symbol length test
kunit: Make default kunit_test timeout configurable via both a module parameter and a Kconfig option
kunit: Adjust kunit_test timeout based on test_{suite,case} speed
kunit: Add test for static stub
Documentation: kunit: Correct MODULE_IMPORT_NS() syntax
|
||
|
Tiffany Yang
|
bdfa89c489 |
kunit: test: Export kunit_attach_mm()
Tests can allocate from virtual memory using kunit_vm_mmap(), which transparently creates and attaches an mm_struct to the test runner if one is not already attached. This is suitable for most cases, except for when the code under test must access a task's mm before performing an mmap. Expose kunit_attach_mm() as part of the interface for those cases. This does not change the existing behavior. Cc: David Gow <davidgow@google.com> Signed-off-by: Tiffany Yang <ynaffit@google.com> Reviewed-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20250714185321.2417234-4-ynaffit@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ujwal Jain
|
63d0a91231 |
kunit: Adjust kunit_test timeout based on test_{suite,case} speed
Currently, the in-kernel kunit test case timeout is 300 seconds. (There is a separate timeout mechanism for the whole test execution in kunit.py, but that's unrelated.) However, tests marked 'slow' or 'very slow' may timeout, particularly on slower machines. Implement a multiplier to the test-case timeout, so that slower tests have longer to complete: - DEFAULT -> 1x default timeout - KUNIT_SPEED_SLOW -> 3x default timeout - KUNIT_SPEED_VERY_SLOW -> 12x default timeout A further change is planned to allow user configuration of the default/base timeout to allow people with faster or slower machines to adjust these to their use-cases. Link: https://lore.kernel.org/r/20250614084711.2654593-2-davidgow@google.com Signed-off-by: Ujwal Jain <ujwaljain@google.com> Co-developed-by: David Gow <davidgow@google.com> Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Rae Moar <rmoar@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Linus Torvalds
|
9f32a03e3e |
I've recently moved computers (among other things) so I'm sending this from a
new machine. The migration process took longer than expected and disrupted my
workflow, but I think I'm ready to go and things should speed up from here.
Luckily, this has been a semi-quiet cycle. The core framework remains unchanged
this time around. In terms of shiny new code though, we have support for the
SpacemiT K1 SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the
usual silicon players like Qualcomm, Samsung, Allwinner, and Renesas.
Surprisingly, the Qualcomm pile was smaller than usual but that is likely
because they put one SoC support inside a driver for a different SoC that is
very similar. Other than all those new clk drivers there are the usual clk data
updates to fix parents, frequency tables, and add missing clks along with some
Kconfig changes to make compile testing simpler and even more DT binding
conversions to boot. The exciting part is still the new SoC support like
SpacemiT and Sophgo support though, which really dominate the diffstat because
they introduce a whole new silicon vendor clk driver.
New Drivers:
- Camera clock controller driver for Qualcomm QCS8300
- DE (display engine) 3.3 clocks on Allwinner H616
- Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers
- Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC
- Clock driver for Sophgo SG2044
- Clock driver for SpacemiT K1 SoC
- Renesas RZ/V2N (R9A09G056) SoC clk driver
Updates:
- Correct data in various SoC clk drivers
- Allow clkaN to be optional in the Qualcomm RPMh clock controller
driver if command db doesn't define it
- Change Kconfig options to not enable by default during compile testing
- Add missing clks in various SoC clk drivers
- Remove some duplicate clk DT bindings and convert some more to YAML
-----BEGIN PGP SIGNATURE-----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=bEFK
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This has been a semi-quiet cycle. The core framework remains unchanged
this time around.
In terms of shiny new code though, we have support for the SpacemiT K1
SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the usual
silicon players like Qualcomm, Samsung, Allwinner, and Renesas.
Surprisingly, the Qualcomm pile was smaller than usual but that is
likely because they put one SoC support inside a driver for a
different SoC that is very similar.
Other than all those new clk drivers there are the usual clk data
updates to fix parents, frequency tables, and add missing clks along
with some Kconfig changes to make compile testing simpler and even
more DT binding conversions to boot.
The exciting part is still the new SoC support like SpacemiT and
Sophgo support though, which really dominate the diffstat because they
introduce a whole new silicon vendor clk driver.
New Drivers:
- Camera clock controller driver for Qualcomm QCS8300
- DE (display engine) 3.3 clocks on Allwinner H616
- Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers
- Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC
- Clock driver for Sophgo SG2044
- Clock driver for SpacemiT K1 SoC
- Renesas RZ/V2N (R9A09G056) SoC clk driver
Updates:
- Correct data in various SoC clk drivers
- Allow clkaN to be optional in the Qualcomm RPMh clock controller
driver if command db doesn't define it
- Change Kconfig options to not enable by default during compile
testing
- Add missing clks in various SoC clk drivers
- Remove some duplicate clk DT bindings and convert some more to
YAML"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks
clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750
clk: qcom: rpmh: make clkaN optional
clk: qcom: Add support for Camera Clock Controller on QCS8300
clk: rockchip: rk3528: add slab.h header include
clk: rockchip: rk3576: add missing slab.h include
clk: meson: Do not enable by default during compile testing
clk: meson-g12a: add missing fclk_div2 to spicc
clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz
clk: rockchip: rename gate-grf clk file
clk: rockchip: rename branch_muxgrf to branch_grf_mux
clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support
dt-bindings: allwinner: add H616 DE33 clock binding
clk: samsung: correct clock summary for hsi1 block
dt-bindings: clock: add SM6350 QCOM video clock bindings
clk: rockchip: Pass NULL as reg pointer when registering GRF MMC clocks
clk: sunxi-ng: h616: Add LVDS reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset
clk: rockchip: rk3036: mark ddrphy as critical
clk: rockchip: rk3036: fix implementation of usb480m clock mux
...
|
||
|
Richard Fitzgerald
|
7a0c1872ee |
clk: test: Forward-declare struct of_phandle_args in kunit/clk.h
Add a forward-declare of struct of_phandle_args to prevent the compiler warning: ../include/kunit/clk.h:29:63: warning: ‘struct of_phandle_args’ declared inside parameter list will not be visible outside of this definition or declaration struct clk_hw *(*get)(struct of_phandle_args *clkspec, void *data), Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20250327125214.82598-1-rf@opensource.cirrus.com Fixes: a82fcb16d977 ("clk: test: Add test managed of_clk_add_hw_provider()") Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Geert Uytterhoeven
|
d1be0cf3b8 |
kunit: Spelling s/slowm/slow/
Fix a misspelling of "slow". Link: https://lore.kernel.org/r/1f7ebf98598418914ec9f5b6d5cb8583d24a4bf0.1743089563.git.geert@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <shuah@kernel.org> |
||
|
Kevin Brodsky
|
0619a4868f |
kunit: Clarify kunit_skip() argument name
kunit_skip() and kunit_mark_skipped() can only be passed a pointer to a struct kunit, not struct kunit_suite (only kunit_log() actually supports both). Rename their first argument accordingly. Link: https://lore.kernel.org/r/20250217140008.1941287-1-kevin.brodsky@arm.com Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Linus Torvalds
|
e8f17cb6f5 |
linux_kselftest-kunit-6.14-rc1
- fixes struct completion warning - introduces autorun option - adds fallback for os.sched_getaffinity - enables hardware acceleration when available -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmeQDEwACgkQCwJExA0N QxzsahAAod2fq5NoQ+SY/x5oc5v0k8tV8pbrdcJBMDx5iKAf/B+EBmqsKHs5VuBi /fUkSQiTndFjXTxZbS1zTRN4XfO5H6AUVmazfHAGhIL4QEsyOocGXIEHwlhHYmLP YwOA2UTS7FilIZA0Z9slKiKnxCZga7pp6Et11rwnydDro2XvPhsnsi9FHchjYmXx lQyaO17RHf5z+LfNAH3j8wsYU910z/Vg5AE1kZ7ckcftFgPXpiK2P2XtDTAKZz4D p7qW6kntUQ9994HbhCa+fw5YIFdSy8fL9QG9uBdWb0x03dQzNkW8mOs8I6DWr4Kw cVp06829K/fpwy3P15mVFjv8cO7W8t74LBGq/EipjQ8eA2RhfkZdwNE/awH9GBDS kjjlNfIh+U4wY6++SAF58k1bZorVgpZfRtpl1anfftEOlex+JPKXaJpoZloMZ/P9 Jh8BtZ+yc16tDkNQlqT24CeSGiC4GvtqUBytXvwGjEdUFzIS+bXGPwHpKrVlHWVV lpntJiUEqIbgZ+XS4UxDHBqXbYKRv7sUlToMJNkMEO5Hz5ok57NjxuPmbfS+LJdk uc6gEH3aAlyI52uJZqotcRmmea52S1HZSUO9E80yl/cS5PHysTlivTXCm85PI7GV a6T43DgnpBqqWPHafnm93DSvlx/wl1LU2JsRYeXp59CkXonlNUk= =caDL -----END PGP SIGNATURE----- Merge tag 'linux_kselftest-kunit-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit updates from Shuah Khan: - fix struct completion warning - introduce autorun option - add fallback for os.sched_getaffinity - enable hardware acceleration when available * tag 'linux_kselftest-kunit-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: Introduce autorun option kunit: enable hardware acceleration when available kunit: add fallback for os.sched_getaffinity kunit: platform: Resolve 'struct completion' warning |
||
|
Stanislav Kinsburskii
|
31691914c3 |
kunit: Introduce autorun option
The new option controls tests run on boot or module load. With the new debugfs "run" dentry allowing to run tests on demand, an ability to disable automatic tests run becomes a useful option in case of intrusive tests. The option is set to true by default to preserve the existent behavior. It can be overridden by either the corresponding module option or by the corresponding config build option. Link: https://lore.kernel.org/r/173015245931.4747.16419517391658830640.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Rae Moar <rmoar@google.com> Acked-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Brian Norris
|
875aec2357 |
kunit: platform: Resolve 'struct completion' warning
If the <kunit/platform_device.h> header is included in a test without
certain other headers, it produces compiler warnings like:
In file included from [...]
../include/kunit/platform_device.h:15:57: warning: ‘struct completion’
declared inside parameter list will not be visible outside of this
definition or declaration
15 | struct completion *x);
| ^~~~~~~~~~
Add a 'struct completion' forward declaration to resolve this.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
|
Peter Zijlstra
|
cdd30ebb1b |
module: Convert symbol namespace to string literal
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
9f3a2ba62c |
The core framework gained a clk provider helper, a clk consumer helper, and
some unit tests for the assigned clk rates feature in DeviceTree. On the vendor
driver side, we gained a whole pile of SoC driver support detailed below. The
majority in the diffstat is Qualcomm, but there's also quite a few Samsung and
Mediatek clk driver additions in here as well. The top vendors is quite common,
but the sheer amount of new drivers is uncommon, so I'm anticipating a larger
number of fixes for clk drivers this cycle.
Core:
- devm_clk_bulk_get_all_enabled() to return number of clks acquired
- devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
- KUnit tests for clk-assigned-rates{,-u64}
New Drivers:
- Marvell PXA1908 SoC clks
- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPCM8XX SoC clks
- MediaTek MT6735 SoC clks
- MediaTek MT7620, MT7628 and MT7688 MMC clks
- Add a driver for gated fixed rate clocks
- Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
- Camera, display and video clock controllers for Qualcomm SA8775P SoCs
- Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm SAR2130P
- Global, camera, display, GPU, and video clock controllers for Qualcomm
SM8475 SoCs
- RTC power domain and Battery Backup Function (VBATTB) clock support for the
Renesas RZ/G3S SoC
- Qualcomm IPQ9574 alpha PLLs
- Support for i.MX91 CCM in the i.MX93 driver
- Microchip LAN969X SoC clks
- Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and reset on
Renesas RZ/V2H(P)
- Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
- Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP
Updates:
- Convert more clk bindings to YAML
- Various clk driver cleanups: NULL checks, add const, etc.
- Remove END/NUM #defines that count number of clks in various binding headers
- Continue moving reset drivers to drivers/reset via auxiliary bus
-----BEGIN PGP SIGNATURE-----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=FqLm
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core framework gained a clk provider helper, a clk consumer
helper, and some unit tests for the assigned clk rates feature in
DeviceTree. On the vendor driver side, we gained a whole pile of SoC
driver support detailed below. The majority in the diffstat is
Qualcomm, but there's also quite a few Samsung and Mediatek clk driver
additions in here as well. The top vendors is quite common, but the
sheer amount of new drivers is uncommon, so I'm anticipating a larger
number of fixes for clk drivers this cycle.
Core:
- devm_clk_bulk_get_all_enabled() to return number of clks acquired
- devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
- KUnit tests for clk-assigned-rates{,-u64}
New Drivers:
- Marvell PXA1908 SoC clks
- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPCM8XX SoC clks
- MediaTek MT6735 SoC clks
- MediaTek MT7620, MT7628 and MT7688 MMC clks
- Add a driver for gated fixed rate clocks
- Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
- Camera, display and video clock controllers for Qualcomm SA8775P
SoCs
- Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm
SAR2130P
- Global, camera, display, GPU, and video clock controllers for
Qualcomm SM8475 SoCs
- RTC power domain and Battery Backup Function (VBATTB) clock support
for the Renesas RZ/G3S SoC
- Qualcomm IPQ9574 alpha PLLs
- Support for i.MX91 CCM in the i.MX93 driver
- Microchip LAN969X SoC clks
- Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and
reset on Renesas RZ/V2H(P)
- Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
- Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP
Updates:
- Convert more clk bindings to YAML
- Various clk driver cleanups: NULL checks, add const, etc.
- Remove END/NUM #defines that count number of clks in various
binding headers
- Continue moving reset drivers to drivers/reset via auxiliary bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits)
clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
clk: Fix invalid execution of clk_set_rate
clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider
clk: lan966x: make it selectable for ARCH_LAN969X
clk: eyeq: add EyeQ6H west fixed factor clocks
clk: eyeq: add EyeQ6H central fixed factor clocks
clk: eyeq: add EyeQ5 fixed factor clocks
clk: eyeq: add fixed factor clocks infrastructure
clk: eyeq: require clock index with phandle in all cases
clk: fixed-factor: add clk_hw_register_fixed_factor_index() function
dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks
dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles
clk: clk-axi-clkgen: make sure to enable the AXI bus clock
dt-bindings: clock: axi-clkgen: include AXI clk
clk: mmp: Add Marvell PXA1908 MPMU driver
clk: mmp: Add Marvell PXA1908 APMU driver
clk: mmp: Add Marvell PXA1908 APBCP driver
clk: mmp: Add Marvell PXA1908 APBC driver
dt-bindings: clock: Add Marvell PXA1908 clock bindings
clk: mmp: Switch to use struct u32_fract instead of custom one
...
|
||
|
Dan Carpenter
|
5017ec667b |
kunit: skb: add gfp to kernel doc for kunit_zalloc_skb()
Kuan-Wei Chiu pointed out that the kernel doc for kunit_zalloc_skb() needs to include the @gfp information. Add it. Reported-by: Kuan-Wei Chiu <visitorckw@gmail.com> Closes: https://lore.kernel.org/all/Zy+VIXDPuU613fFd@visitorckw-System-Product-Name/ Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Dan Carpenter
|
fd0a5afb54 |
kunit: skb: use "gfp" variable instead of hardcoding GFP_KERNEL
The intent here was clearly to use the gfp variable flags instead of
hardcoding GFP_KERNEL. All the callers pass GFP_KERNEL as the gfp
flags so this doesn't affect runtime.
Fixes: b3231d353a51 ("kunit: add a convenience allocation wrapper for SKBs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
|
Stephen Boyd
|
00977af421 |
of: kunit: Extract some overlay boiler plate into macros
Make the lives of __of_overlay_apply_kunit() callers easier by extracting some of the boiler plate involved in referencing the DT overlays. Cc: Brendan Higgins <brendan.higgins@linux.dev> Cc: David Gow <davidgow@google.com> Cc: Rae Moar <rmoar@google.com> Cc: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240822002433.1163814-3-sboyd@kernel.org |
||
|
Stephen Boyd
|
a82fcb16d9 |
clk: test: Add test managed of_clk_add_hw_provider()
Add a test managed version of of_clk_add_hw_provider() that automatically unregisters the clk_hw provider upon test conclusion. Cc: Brendan Higgins <brendan.higgins@linux.dev> Cc: David Gow <davidgow@google.com> Cc: Rae Moar <rmoar@google.com> Cc: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240822002433.1163814-2-sboyd@kernel.org |
||
|
Linus Torvalds
|
9ab27b0186 |
The core clk framework is left largely untouched this time around except for
support for the newly ratified DT property 'assigned-clock-rates-u64'. I'm much
more excited about the support for loading DT overlays from KUnit tests so that
we can test how the clk framework parses DT nodes during clk registration. The
clk framework has some places that are highly DeviceTree dependent so this
charts the path to extend the KUnit tests to cover even more framework code in
the future. I've got some more tests on the list that use the DT overlay
support, but they uncovered issues with clk unregistration that I'm still
working on fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm and
Renesas SoCs, making it fairly usual. Looking closer, there are fixes for
things all over the place, like adding missing clk frequencies or moving
defines for the number of clks out of DT binding headers into the drivers.
There are even conversions of DT bindings to YAML and migration away from
strings to describe clk topology. Overall it doesn't look unusual so I expect
the new drivers to be where we'll have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid them
turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs and
add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel clocks
on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating more
memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to
i.MX7D lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the
i.MXRT1050 driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema
-----BEGIN PGP SIGNATURE-----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=XmiQ
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core clk framework is left largely untouched this time around
except for support for the newly ratified DT property
'assigned-clock-rates-u64'.
I'm much more excited about the support for loading DT overlays from
KUnit tests so that we can test how the clk framework parses DT nodes
during clk registration. The clk framework has some places that are
highly DeviceTree dependent so this charts the path to extend the
KUnit tests to cover even more framework code in the future. I've got
some more tests on the list that use the DT overlay support, but they
uncovered issues with clk unregistration that I'm still working on
fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm
and Renesas SoCs, making it fairly usual. Looking closer, there are
fixes for things all over the place, like adding missing clk
frequencies or moving defines for the number of clks out of DT binding
headers into the drivers. There are even conversions of DT bindings to
YAML and migration away from strings to describe clk topology. Overall
it doesn't look unusual so I expect the new drivers to be where we'll
have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid
them turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs
and add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel
clocks on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating
more memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D
lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the i.MXRT1050
driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits)
clk: Switch back to struct platform_driver::remove()
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
clk: provide devm_clk_get_optional_enabled_with_rate()
clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
clk: renesas: rzv2h: Add support for dynamic switching divider clocks
clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
clk: rockchip: fix error for unknown clocks
clk: rockchip: rk3588: drop unused code
clk: rockchip: Add clock controller for the RK3576
clk: rockchip: Add new pll type pll_rk3588_ddr
dt-bindings: clock, reset: Add support for rk3576
dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
clk: imx95: enable the clock of NETCMIX block control
dt-bindings: clock: add RMII clock selection
dt-bindings: clock: add i.MX95 NETCMIX block control
clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
...
|
||
|
Linus Torvalds
|
194fcd20eb |
linux_kselftest-kunit-6.12-rc1
This kunit update for Linux 6.12-rc1 consists of:
-- a new int_pow test suite
-- documentation update to clarify filename best practices
-- kernel-doc fix for EXPORT_SYMBOL_IF_KUNIT
-- change to build compile_commands.json automatically instead
of requiring a manual build.
-----BEGIN PGP SIGNATURE-----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=rmqh
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- a new int_pow test suite
- documentation update to clarify filename best practices
- kernel-doc fix for EXPORT_SYMBOL_IF_KUNIT
- change to build compile_commands.json automatically instead of
requiring a manual build
* tag 'linux_kselftest-kunit-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
lib/math: Add int_pow test suite
kunit: tool: Build compile_commands.json
kunit: Fix kernel-doc for EXPORT_SYMBOL_IF_KUNIT
Documentation: KUnit: Update filename best practices
|
||
|
David Gow
|
12cb32a52e |
kunit: Fix missing kerneldoc comment
Add a missing kerneldoc comment for the 'test' test context parameter, fixing the following warning: include/kunit/test.h:492: warning: Function parameter or struct member 'test' not described in 'kunit_kfree_const' Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/lkml/20240827160631.67e121ed@canb.auug.org.au/ Fixes: f2c6dbd22017 ("kunit: Device wrappers should also manage driver name") Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Michal Wajdeczko
|
a4311c274e |
kunit: Fix kernel-doc for EXPORT_SYMBOL_IF_KUNIT
While kunit/visibility.h is today not included in any generated kernel documentation, also likely due to the fact that none of the existing comments are correctly recognized as kernel-doc, but once we decide to add this header and fix the tool, there will be: ../include/kunit/visibility.h:61: warning: Function parameter or struct member 'symbol' not described in 'EXPORT_SYMBOL_IF_KUNIT' Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Rae Moar <rmoar@google.com> Acked-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
David Gow
|
f2c6dbd220 |
kunit: Device wrappers should also manage driver name
kunit_driver_create() accepts a name for the driver, but does not copy
it, so if that name is either on the stack, or otherwise freed, we end
up with a use-after-free when the driver is cleaned up.
Instead, strdup() the name, and manage it as another KUnit allocation.
As there was no existing kunit_kstrdup(), we add one. Further, add a
kunit_ variant of strdup_const() and kfree_const(), so we don't need to
allocate and manage the string in the majority of cases where it's a
constant.
However, these are inline functions, and is_kernel_rodata() only works
for built-in code. This causes problems in two cases:
- If kunit is built as a module, __{start,end}_rodata is not defined.
- If a kunit test using these functions is built as a module, it will
suffer the same fate.
This fixes a KASAN splat with overflow.overflow_allocation_test, when
built as a module.
Restrict the is_kernel_rodata() case to when KUnit is built as a module,
which fixes the first case, at the cost of losing the optimisation.
Also, make kunit_{kstrdup,kfree}_const non-inline, so that other modules
using them will not accidentally depend on is_kernel_rodata(). If KUnit
is built-in, they'll benefit from the optimisation, if KUnit is not,
they won't, but the string will be properly duplicated.
Fixes: d03c720e03bd ("kunit: Add APIs for managing devices")
Reported-by: Nico Pache <npache@redhat.com>
Closes: https://groups.google.com/g/kunit-dev/c/81V9b9QYON0
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
|
Stephen Boyd
|
d690bd11e8 |
clk: Add test managed clk provider/consumer APIs
Unit tests are more ergonomic and simpler to understand if they don't have to hoist a bunch of code into the test harness init and exit functions. Add some test managed wrappers for the clk APIs so that clk unit tests can write more code in the actual test and less code in the harness. Only add APIs that are used for now. More wrappers can be added in the future as necessary. Cc: Brendan Higgins <brendan.higgins@linux.dev> Cc: David Gow <davidgow@google.com> Cc: Rae Moar <rmoar@google.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240718210513.3801024-7-sboyd@kernel.org |
||
|
Stephen Boyd
|
5ac7973032 |
platform: Add test managed platform_device/driver APIs
Introduce KUnit resource wrappers around platform_driver_register(), platform_device_alloc(), and platform_device_add() so that test authors can register platform drivers/devices from their tests and have the drivers/devices automatically be unregistered when the test is done. This makes test setup code simpler when a platform driver or platform device is needed. Add a few test cases at the same time to make sure the APIs work as intended. Cc: Brendan Higgins <brendan.higgins@linux.dev> Reviewed-by: David Gow <davidgow@google.com> Cc: Rae Moar <rmoar@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240718210513.3801024-6-sboyd@kernel.org |
||
|
Stephen Boyd
|
6774e90f31 |
of: Add test managed wrappers for of_overlay_apply()/of_node_put()
Add test managed wrappers for of_overlay_apply() that automatically
removes the overlay when the test is finished. This API is intended for
use by KUnit tests that test code which relies on 'struct device_node's
and of_*() APIs.
KUnit tests will call of_overlay_apply_kunit() to load an overlay that's
been built into the kernel image. When the test is complete, the overlay
will be removed.
This has a few benefits:
1) It keeps the tests hermetic because the overlay is removed when the
test is complete. Tests won't even be aware that an overlay was
loaded in another test.
2) The overlay code can live right next to the unit test that loads it.
The overlay and the unit test can be compiled into one kernel module
if desired.
3) We can test different device tree configurations by loading
different overlays. The overlays can be written for a specific test,
and there can be many of them loaded per-test without needing to jam
all possible combinations into one DTB.
4) It also allows KUnit to test device tree dependent code on any
architecture, not just UML. This allows KUnit tests to test
architecture specific device tree code.
There are some potential pitfalls though. Test authors need to be
careful to not overwrite properties in the live tree. The easiest way to
do this is to add and remove nodes with a 'kunit-' prefix, almost
guaranteeing that the same node won't be present in the tree loaded at
boot.
Suggested-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-3-sboyd@kernel.org
|
||
|
Eric Chan
|
ebf51e460e |
kunit: Introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
Introduces KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros to provide assert-type equivalents for memory comparison. While KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ are available for expectations, the addition of these new macros ensures that assertions can also be used for memory comparisons, enhancing the consistency and completeness of the kunit framework. Signed-off-by: Eric Chan <ericchancf@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Eric Chan
|
7d4087b013 |
kunit: Rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT for readability
Both KUNIT_FAIL and KUNIT_ASSERT_FAILURE defined to KUNIT_FAIL_ASSERTION with different tpye of kunit_assert_type. The current naming of KUNIT_ASSERT_FAILURE and KUNIT_FAIL_ASSERTION is confusing due to their similarities. To improve readability and symmetry, renames KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT. Makes the naming consistent, with KUNIT_FAIL and KUNIT_FAIL_AND_ABORT being symmetrical. Additionally, an explanation for KUNIT_FAIL_AND_ABORT has been added to clarify its usage. Signed-off-by: Eric Chan <ericchancf@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Eric Chan
|
2be32bbe69 |
kunit: Fix the comment of KUNIT_ASSERT_STRNEQ as assertion
The current comment for KUNIT_ASSERT_STRNEQ incorrectly describes it as an expectation. Since KUNIT_ASSERT_STRNEQ is an assertion, updates the comment to correctly refer to it as such. Signed-off-by: Eric Chan <ericchancf@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Kees Cook
|
51104c19d8 |
kunit: test: Add vm_mmap() allocation resource manager
For tests that need to allocate using vm_mmap() (e.g. usercopy and execve), provide the interface to have the allocation tracked by KUnit itself. This requires bringing up a placeholder userspace mm. This combines my earlier attempt at this with Mark Rutland's version[1]. Normally alloc_mm() and arch_pick_mmap_layout() aren't exported for modules, so export these only for KUnit testing. Link: https://lore.kernel.org/lkml/20230321122514.1743889-2-mark.rutland@arm.com/ [1] Co-developed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Ivan Orlov
|
2c7afc2a88 |
kunit: Cover 'assert.c' with tests
There are multiple assertion formatting functions in the `assert.c` file, which are not covered with tests yet. Implement the KUnit test for these functions. The test consists of 11 test cases for the following functions: 1) 'is_literal' 2) 'is_str_literal' 3) 'kunit_assert_prologue', test case for multiple assert types 4) 'kunit_assert_print_msg' 5) 'kunit_unary_assert_format' 6) 'kunit_ptr_not_err_assert_format' 7) 'kunit_binary_assert_format' 8) 'kunit_binary_ptr_assert_format' 9) 'kunit_binary_str_assert_format' 10) 'kunit_assert_hexdump' 11) 'kunit_mem_assert_format' The test aims at maximizing the branch coverage for the assertion formatting functions. As you can see, it covers some of the static helper functions as well, so mark the static functions in `assert.c` as 'VISIBLE_IF_KUNIT' and conditionally export them with EXPORT_SYMBOL_IF_KUNIT. Add the corresponding definitions to `assert.h`. Build the assert test when CONFIG_KUNIT_TEST is enabled, similar to how it is done for the string stream test. Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Reviewed-by: Rae Moar <rmoar@google.com> Acked-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Mickaël Salaün
|
8bd5d74bab |
kunit: Print last test location on fault
This helps identify the location of test faults with opportunistic calls to _KUNIT_SAVE_LOC(). This can be useful while writing tests or debugging them. It is possible to call KUNIT_SUCCESS() to explicit save last location. Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Gow <davidgow@google.com> Cc: Rae Moar <rmoar@google.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mickaël Salaün <mic@digikod.net> Link: https://lore.kernel.org/r/20240408074625.65017-7-mic@digikod.net Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Mickaël Salaün
|
3a35c13007 |
kunit: Handle test faults
Previously, when a kernel test thread crashed (e.g. NULL pointer dereference, general protection fault), the KUnit test hanged for 30 seconds and exited with a timeout error. Fix this issue by waiting on task_struct->vfork_done instead of the custom kunit_try_catch.try_completion, and track the execution state by initially setting try_result with -EINTR and only setting it to 0 if the test passed. Fix kunit_generic_run_threadfn_adapter() signature by returning 0 instead of calling kthread_complete_and_exit(). Because thread's exit code is never checked, always set it to 0 to make it clear. To make this explicit, export kthread_exit() for KUnit tests built as module. Fix the -EINTR error message, which couldn't be reached until now. This is tested with a following patch. Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Gow <davidgow@google.com> Tested-by: Rae Moar <rmoar@google.com> Signed-off-by: Mickaël Salaün <mic@digikod.net> Link: https://lore.kernel.org/r/20240408074625.65017-5-mic@digikod.net Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
David Gow
|
806cb22702 |
kunit: Annotate _MSG assertion variants with gnu printf specifiers
KUnit's assertion macros have variants which accept a printf format string, to allow tests to specify a more detailed message on failure. These (and the related KUNIT_FAIL() macro) ultimately wrap the __kunit_do_failed_assertion() function, which accepted a printf format specifier, but did not have the __printf attribute, so gcc couldn't warn on incorrect agruments. It turns out there were quite a few tests with such incorrect arguments. Add the __printf() specifier now that we've fixed these errors, to prevent them from recurring. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Gow <davidgow@google.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Justin Stitt <justinstitt@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Linus Torvalds
|
3e7aeb78ab |
Networking changes for 6.8.
Core & protocols
----------------
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up
build time warnings to safeguard against future header changes.
This improves TCP performances with many concurrent connections
up to 40%.
- Add page-pool netlink-based introspection, exposing the
memory usage and recycling stats. This helps indentify
bad PP users and possible leaks.
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set.
This lowers the time taken by connect() for hosts having
many active connections to the same destination.
- Refactor the TCP bind conflict code, shrinking related socket
structs.
- Refactor TCP SYN-Cookie handling, as a preparation step to
allow arbitrary SYN-Cookie processing via eBPF.
- Tune optmem_max for 0-copy usage, increasing the default value
to 128KB and namespecifying it.
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations.
- Reduce extension header parsing overhead at GRO time.
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries.
- Reorder nftables struct members, to keep data accessed by the
datapath first.
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer.
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex).
- More data-race annotations.
- Extend the diag interface to dump TCP bound-only sockets.
- Conditional notification of events for TC qdisc class and actions.
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID.
- Implement SMCv2.1 virtual ISM device support.
- Add support for Batman-avd mulicast packet type.
BPF
---
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers. It
improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload.
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y.
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques.
- Support uid/gid options when mounting bpffs.
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is identified
by its id.
- Extend verifier to allow bpf_refcount_acquire() of a map value field
obtained via direct load which is a use-case needed in sched_ext.
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter.
- Support for VLAN tag in XDP hints.
- Remove deprecated bpfilter kernel leftovers given the project
is developed in user-space (https://github.com/facebook/bpfilter).
Misc
----
- Support for parellel TC self-tests execution.
- Increase MPTCP self-tests coverage.
- Updated the bridge documentation, including several so-far
undocumented features.
- Convert all the net self-tests to run in unique netns, to
avoid random failures due to conflict and allow concurrent
runs.
- Add TCP-AO self-tests.
- Add kunit tests for both cfg80211 and mac80211.
- Autogenerate Netlink families documentation from YAML spec.
- Add yml-gen support for fixed headers and recursive nests, the
tool can now generate user-space code for all genetlink families
for which we have specs.
- A bunch of additional module descriptions fixes.
- Catch incorrect freeing of pages belonging to a page pool.
Driver API
----------
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust.
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship.
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances.
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host.
- Add support for ethtool symmetric-xor RSS hash.
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform.
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute.
- Convert older drivers to platform remove callback returning void.
- Add support for PHY package MMD read/write.
New hardware / drivers
----------------------
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed
-------
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Drivers
-------
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will allow
in future releases combining multiple PFs devices attached to
different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring param,
coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=1bW6
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
|
||
|
Richard Fitzgerald
|
7ece381aa7 |
kunit: Protect string comparisons against NULL
Add NULL checks to KUNIT_BINARY_STR_ASSERTION() so that it will fail cleanly if either pointer is NULL, instead of causing a NULL pointer dereference in the strcmp(). A test failure could be that a string is unexpectedly NULL. This could be trapped by KUNIT_ASSERT_NOT_NULL() but that would terminate the test at that point. It's preferable that the KUNIT_EXPECT_STR*() macros can handle NULL pointers as a failure. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Richard Fitzgerald
|
fcbac39b7d |
kunit: Allow passing function pointer to kunit_activate_static_stub()
Swap the arguments to typecheck_fn() in kunit_activate_static_stub()
so that real_fn_addr can be either the function itself or a pointer
to that function.
This is useful to simplify redirecting static functions in a module.
Having to pass the actual function meant that it must be exported
from the module. Either making the 'static' and EXPORT_SYMBOL*()
conditional (which makes the code messy), or change it to always
exported (which increases the export namespace and prevents the
compiler inlining a trivial stub function in non-test builds).
With the original definition of kunit_activate_static_stub() the
address of real_fn_addr was passed to typecheck_fn() as the type to
be passed. This meant that if real_fn_addr was a pointer-to-function
it would resolve to a ** instead of a *, giving an error like this:
error: initialization of ‘int (**)(int)’ from incompatible pointer
type ‘int (*)(int)’ [-Werror=incompatible-pointer-types]
kunit_activate_static_stub(test, add_one_fn_ptr, subtract_one);
| ^~~~~~~~~~~~
./include/linux/typecheck.h:21:25: note: in definition of macro
‘typecheck_fn’
21 | ({ typeof(type) __tmp = function; \
Swapping the arguments to typecheck_fn makes it take the type of a
pointer to the replacement function. Either a function or a pointer
to function can be assigned to that. For example:
static int some_function(int x)
{
/* whatever */
}
int (* some_function_ptr)(int) = some_function;
static int replacement(int x)
{
/* whatever */
}
Then:
kunit_activate_static_stub(test, some_function, replacement);
yields:
typecheck_fn(typeof(&replacement), some_function);
and:
kunit_activate_static_stub(test, some_function_ptr, replacement);
yields:
typecheck_fn(typeof(&replacement), some_function_ptr);
The two typecheck_fn() then resolve to:
int (*__tmp)(int) = some_function;
and
int (*__tmp)(int) = some_function_ptr;
Both of these are valid. In the first case the compiler inserts
an implicit '&' to take the address of the supplied function, and
in the second case the RHS is already a pointer to the same type.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
|
Benjamin Berg
|
b3231d353a |
kunit: add a convenience allocation wrapper for SKBs
Add a simple convenience helper to allocate and zero fill an SKB for the use by a kunit test. Also provide a way to free it again in case that may be desirable. This simply mirrors the kunit_kmalloc API. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: David Gow <davidgow@google.com> Link: https://msgid.link/20231220151952.415232-3-benjamin@sipsolutions.net [adjust file description as discussed] Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Benjamin Berg
|
292010ee50 |
kunit: add parameter generation macro using description from array
The existing KUNIT_ARRAY_PARAM macro requires a separate function to get the description. However, in a lot of cases the description can just be copied directly from the array. Add a second macro that avoids having to write a static function just for a single strscpy. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: David Gow <davidgow@google.com> Link: https://msgid.link/20231220151952.415232-2-benjamin@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
davidgow@google.com
|
d03c720e03 |
kunit: Add APIs for managing devices
Tests for drivers often require a struct device to pass to other functions. While it's possible to create these with root_device_register(), or to use something like a platform device, this is both a misuse of those APIs, and can be difficult to clean up after, for example, a failed assertion. Add some KUnit-specific functions for registering and unregistering a struct device: - kunit_device_register() - kunit_device_register_with_driver() - kunit_device_unregister() These helpers allocate a on a 'kunit' bus which will either probe the driver passed in (kunit_device_register_with_driver), or will create a stub driver (kunit_device_register) which is cleaned up on test shutdown. Devices are automatically unregistered on test shutdown, but can be manually unregistered earlier with kunit_device_unregister() in order to, for example, test device release code. Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Rae Moar
|
6c4ea2f48d |
kunit: add is_init test attribute
Add is_init test attribute of type bool. Add to_string, get, and filter methods to lib/kunit/attributes.c. Mark each of the tests in the init section with the is_init=true attribute. Add is_init to the attributes documentation. Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Rae Moar <rmoar@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Rae Moar
|
d81f0d7b8b |
kunit: add KUNIT_INIT_TABLE to init linker section
Add KUNIT_INIT_TABLE to the INIT_DATA linker section. Alter the KUnit macros to create init tests: kunit_test_init_section_suites Update lib/kunit/executor.c to run both the suites in KUNIT_TABLE and KUNIT_INIT_TABLE. Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Rae Moar <rmoar@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
David Gow
|
56778b49c9 |
kunit: Add a macro to wrap a deferred action function
KUnit's deferred action API accepts a void(*)(void *) function pointer which is called when the test is exited. However, we very frequently want to use existing functions which accept a single pointer, but which may not be of type void*. While this is probably dodgy enough to be on the wrong side of the C standard, it's been often used for similar callbacks, and gcc's -Wcast-function-type seems to ignore cases where the only difference is the type of the argument, assuming it's compatible (i.e., they're both pointers to data). However, clang 16 has introduced -Wcast-function-type-strict, which no longer permits any deviation in function pointer type. This seems to be because it'd break CFI, which validates the type of function calls. This rather ruins our attempts to cast functions to defer them, and leaves us with a few options. The one we've chosen is to implement a macro which will generate a wrapper function which accepts a void*, and casts the argument to the appropriate type. For example, if you were trying to wrap: void foo_close(struct foo *handle); you could use: KUNIT_DEFINE_ACTION_WRAPPER(kunit_action_foo_close, foo_close, struct foo *); This would create a new kunit_action_foo_close() function, of type kunit_action_t, which could be passed into kunit_add_action() and similar functions. In addition to defining this macro, update KUnit and its tests to use it. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Richard Fitzgerald
|
05e2006ce4 |
kunit: Use string_stream for test log
Replace the fixed-size log buffer with a string_stream so that the log can grow as lines are added. The existing kunit log tests have been updated for using a string_stream as the log. No new test have been added because there are already tests for the underlying string_stream. As the log tests now depend on string_stream functions they cannot build when kunit-test is a module. They have been surrounded by a #if to replace them with skipping version when the test is build as a module. Though this isn't pretty, it avoids moving code to another file while that code is also being changed. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Linus Torvalds
|
d68b4b6f30 |
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options").
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h").
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands").
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions").
- Switch the handling of kdump from a udev scheme to in-kernel handling,
by Eric DeVolder ("crash: Kernel handling of CPU and memory hot
un/plug").
- Many singleton patches to various parts of the tree
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA
juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy
QHy7lL0Syha38kKLMXTM+bN6YQHi9AU=
=WJQa
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
|