When there is no fallback possibility available for the function topology
use it is better to try to create a profile for the card in best effort
manner, leaving out non supported links for example.
As an example: some laptops present SSPx-BT link but we don't have fragment
yet to support this. If we only have support for functional topology
without monolithic fallback then we would fail the card creation.
The reason why the monolithic topology works on the same device is that it
does not have the SSPx-BT link handled, it is ignored.
In case when there is no fallback possibility we should try to create the
card with links that we support as best effort instead of failing and
leaving the user without a card.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251215101036.9370-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Support for multiple sections in a BPT stream
- Aligning DMA frame with BPT frames
- Qualcomm: support for v3.1.0 controllers
-----BEGIN PGP SIGNATURE-----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=tDi0
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Support for multiple sections in a BPT stream
- Align DMA frame with BPT frames
- Qualcomm support for v3.1.0 controllers
* tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: handle multi BPT sections
soundwire: pass sdw_bpt_section to cdns BPT helpers
soundwire: introduce BPT section
soundwire: intel_ace2x: add fake frame to BRA read command
soundwire: cadence_master: add fake_size parameter to sdw_cdns_prepare_read_dma_buffer
ASoC: SOF: Intel: export hda_sdw_bpt_get_buf_size_aligment
soundwire: cadence: export sdw_cdns_bpt_find_bandwidth
soundwire: cadence_master: set data_per_frame as frame capability
soundwire: only compute BPT stream in sdw_compute_dp0_port_params
soundwire: cadence_master: make frame index trace more readable
soundwire: qcom: adding support for v3.1.0
dt-bindings: soundwire: qcom: Document v3.1.0 version of IP block
soundwire: qcom: prepare for v3.x
soundwire: qcom: deprecate qcom,din/out-ports
dt-bindings: soundwire: qcom: deprecate qcom,din/out-ports
soundwire: qcom: remove unused rd_fifo_depth
of: base: Add of_property_read_u8_index
The rest for 6.19 merge window. The only slightly large change is
the enablement of CIX HD-audio controller, which took a bit time to
be cooked up, while most of other changes are device-specific small
trivial fixes.
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so
it can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmk6tSgOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE+RVBAAjPpGl5pG+oS2COkHkaieg+fHcHBOQxKDO+fU
4p8t/gAb6ELPrYX7YdH0EbSyUhQOYkRin5DSNj1qEa4PQwCayXp2Xv/HT7t6aqbl
0F3rboXTEnBMRf8haAde+hgNzF0aLwOE3BFZc5hWpDs04pFX8Y0hKu1/JlrVVyvJ
j54KuoZQxp7nu9N+t9xsdIet3nrrjbdvKGXqPbNbo6IWviuj+6+YSueaLdgNOpD1
nP8dDx2LcuRf0KRPNoIP4ZuJvOD3C9/rbbHAkSZ5Vf2dliy+aIHo/8SXWjBVW9N3
V+HFc9P9te3VtUpCOIZjK2Pgf3QTfMIkFIspOR4kSlbdkhoZoPlM2J65VXXugeur
5lxfnXwL439iW2KfKGFjSdu23EHh7VSBIIXWzRO0y0qtgyEakINCkOEVG//AW+9v
OL1IUoyatfa3HQA2K15E1xgVr4jTAwENXyMszJ+1zsaLTTD09sKFmFmfLUUCS9Ir
ekpRC1n0m8dWfDJtGcmcxyda87DL+9lOK0r6KW3Mo31EL92KWlm1wJiQSrsuNWgh
J4NE8F9+Smh96CKXB/v+B+kXIOsXh8+dVoYWRNzJ9wYfXf2ch8l2LIYPBFJa159/
7XyzFWC3636ZWrCn6sE/rkzEh/0OHEWI+npeN47OJ1Wh1CSS/b1tFZbGaurkGe5i
ni1Sa54=
=3ys0
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
The dma buffer need to be a multiple of data block size and
the fifo size. Export a function to return the LCM of data
block size and the fifo size.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014031450.3781789-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add bus addr_offset field for dma address translation,
for some SoCs such as CIX SKY1 which is ARM64 Arch, HOST
and HDAC has different memory view, so need to do dma address
translation between HOST and HDAC.
Signed-off-by: Joakim Zhang <joakim.zhang@cixtech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251205154621.3019640-3-joakim.zhang@cixtech.com
The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there aren't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API clean works, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes.
-----BEGIN PGP SIGNATURE-----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=1JUI
-----END PGP SIGNATURE-----
Merge tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there isn't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API cleanup work, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes"
* tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (739 commits)
ALSA: hda/realtek: Add PCI SSIDs to HP ProBook quirks
ALSA: usb-audio: Simplify with usb_endpoint_max_periodic_payload()
ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops
ALSA: rawmidi: Fix inconsistent indenting warning reported by smatch
ALSA: dice: fix buffer overflow in detect_stream_formats()
ASoC: codecs: Modify awinic amplifier dsp read and write functions
ASoC: SDCA: Fixup some more Kconfig issues
ASoC: cs35l56: Log a message if firmware is missing
ASoC: nau8325: Delete a stray tab
firmware: cs_dsp: Add test cases for client_ops == NULL
firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops
ASoC: fsl_micfil: Set channel range control
ASoC: fsl_micfil: Add default quality for different platforms
ASoC: intel: sof_sdw: Add codec_info for cs42l45
ASoC: sdw_utils: Add cs42l45 support functions
ASoC: intel: sof_sdw: Add ability to have auxiliary devices
ASoC: sdw_utils: Move codec_name to dai info
ASoC: sdw_utils: Add codec_conf for every DAI
ASoC: SDCA: Add terminal type into input/output widget name
ASoC: SDCA: Align mute controls to ALSA expectations
...
This is a very large set of updates, as well as some more extensive
cleanup work from Morimto-san we've also added a generic SCDA class
driver for SoundWire devices enabling us to support many chips with
no custom code. There's also a batch of new drivers added for both
SoCs and CODECs.
- Added a SoundWire SCDA generic class driver, pulling in a little
regmap work to support it.
- A *lot* of cleaup and API improvement work from Morimoto-san.
- Lots of work on the existing Cirrus, Intel, Maxim and Qualcomm
drivers.
- Support for Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830.
This also pulls in some gpiolib changes supporting shared GPIOs in the
core there so we can convert some of the ASoC drivers open coding
handling of that to the core functionality.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkt6lUACgkQJNaLcl1U
h9D7dgf+JP2+yZIeRBud7CEO4Docda2uoRssT7GAIY/Rqrpem5FI0c0pWyZISvhn
scyjkoCrQfHEoeYrtC3l5bDI7F8o5Tc91hGzhJiCi3mb8jSwi+CaNIpR0Cet3epV
B9wQgzxlxbmKCxJRUYTPQF3n1uBJWc5EBHSc5QPddTZ0vdUfSlX0FAKHsabpmaOC
TpkdJnOlH8WUokmP3kP3TpzlflmOSLehnWX4BelJe5Os5O0PQpiKh/JG3oCYHSmc
yEbzCjOaya80HHn11FShOpy+B4b6sLUMcN+CAmDiLAdNFGvvjgmjpwwZtLYAm09Z
zFhN7XuVk1vXf+Zx/jHqYKaZtvvAsQ==
=Xwls
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.19
This is a very large set of updates, as well as some more extensive
cleanup work from Morimto-san we've also added a generic SCDA class
driver for SoundWire devices enabling us to support many chips with
no custom code. There's also a batch of new drivers added for both
SoCs and CODECs.
- Added a SoundWire SCDA generic class driver, pulling in a little
regmap work to support it.
- A *lot* of cleaup and API improvement work from Morimoto-san.
- Lots of work on the existing Cirrus, Intel, Maxim and Qualcomm
drivers.
- Support for Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830.
This also pulls in some gpiolib changes supporting shared GPIOs in the
core there so we can convert some of the ASoC drivers open coding
handling of that to the core functionality.
If the amp is still reporting FIRMWARE_MISSING after cs35l56_patch()
has completed it is helpful to log a warning.
After a complete firmware download the FIRMWARE_MISSING flag will be
clear. If this isn't the case, the driver should log a message to
report this.
The amp can produce basic audio output without firmware, as a fallback,
so this wasn't originally logged as a warning condition because the amp
is still in an operational state - just not with full functionality.
However, it was not at all obvious to an end user that anything is
unusual.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251128112520.40067-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the helper functions into the machine driver for the cs42l45,
this will register a jack for jack detection and add things into
to the components string if they are needed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the sof_sdw machine driver assumes that all devices involved
in the sound card are connected through a DAI link. However for SDCA
devices we still want the HID (Human Interface Device, used for jack
buttons) to be part of the sound card, but it contains no DAI links.
Add support into the machine driver to specify a list of auxiliary
devices to merged into the card.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As SDCA devices will support each DAI link on a different child device,
move the codec name from codec_info to each dai_info. To allow the
appropriate function device to be bound to each DAI link.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There have been some complaints around the UCM files for SDCA
devices that the control system is quite hard to follow. This is
definitely true without the specification handy the naming can be
a little cryptic. However, as most of the information is parsed
from DisCo there are some limits to what the driver can safely do
to improve this.
However, one area that can be improved is the non-streaming
input/output terminals. These have a field (enum sdca_terminal_type)
that describes the usage of that terminal. These types can be
appended to the entity name to give the users a better clue as
to the purpose. For example "OT 43", would now become "OT 43
Headphone". This would follow through into the jack controls which
would change from "OT 43 Jack" to "OT 43 Headphone Jack", making the
purpose much more obvious to the user.
This provides slightly more readable controls without relying on
implicit knowledge that individual parts might not conform to.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently mute controls will be called "FU xx Mute Switch" (note
the switch is added programmatically outside the coverage of this
patch) and the accompanying volume control would be called "FU xx
Channel Volume". These names are taken from the SDCA specification,
however, this does not mesh well with the ALSA naming system. ALSA
generally expects enables rather than mutes and expects that mutes
and volumes have matching names.
Update the names and invert the mute controls to make them more
standard "FU XX Channel Switch", this does slightly deviate from
the SDCA specification but it makes the rest of the Linux ecosystem
a lot happier.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
The CAL_SET_STATUS and CAL_DATA_RB controls are volatile and read-only, but
the existing ASoC macros to define controls don't allow setting access
permissions, so those controls were marked as non-volatile read/write.
These four patches fix that.
The first two patches add two new control macros to soc.h. I really don't
like codec drivers open-coding a kcontrol_new content for a control that
will be managed by the ASoC info/get/put handlers. If a new type of ASoC
control definition is needed it's better to have it in soc.h so all the
dependencies between ASoC and the kcontrol_new content are in one place.
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
This series adds an initial SDCA class driver, this consists of a
primary driver attached to the SoundWire device, and auxiliary drivers
representing each of the functions of the SDCA device. These drivers all
use the APIs added over the past series's to provide the class
functionality, as such these final drivers themselves are quite thin.
Also a few fix ups at the start of the series that have gathered up
whilst the last SDCA series was in review.
Use the auxiliary bus to register/unregister subdevices for each
function. Each function will be handled with a separate driver,
matched using a name.
If a vendor wants to override a specific function driver, they could
use a custom name to match with a custom function driver.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-12-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to write out the SDCA blind initialization writes.
Acked-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-11-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The structure sdca_function_desc contains a fwnode_handle which is
undefined if the user doesn't pull in an appropriate header. Add a
forward declaration to avoid this.
Fixes: 996bf834d0b6 ("ASoC: SDCA: Add code to parse Function information")
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-4-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case the SDCA IRQ is built in but FDL support is not stub
functions are required for the FDL helpers to avoid build failures. The
FDL IRQs likely shouldn't get triggered in this case, however they would
still be a part of the build.
Fixes: 71f7990a34cd ("ASoC: SDCA: Add FDL library for XU entities")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511200419.SbU6YvjE-lkp@intel.com/
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120155657.2181751-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a macro SND_SOC_BYTES_E_ACC() to allow the access permission flags
to be set. This is the same as SND_SOC_BYTES_E() but with an extra
argument for the access flags.
This will be used by the cs35l56.c driver to create a read-only
volatile byte control. It's preferable to avoid custom control macros
in codec drivers. Code maintenance is easier if all control macros are
defined together in soc.h.
This commit only creates this one macro that is actually going to be used.
There's no point cluttering soc.h with unused macros - that just adds a
maintenance burden. People can add equivalents for the other macros if
they need them.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120134437.1179191-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a macro SOC_ENUM_EXT_ACC() to allow the access permission flags
to be set. This is the same as SOC_ENUM_EXT() but with an extra
argument for the access flags.
This will be used by the cs35l56.c driver to create a read-only
volatile enum. It's preferable to avoid custom control macros in codec
drivers. Code maintenance is easier if all control macros are defined
together in soc.h.
This commit only creates this one macro that is actually going to be used.
There's no point cluttering soc.h with unused macros - that just adds a
maintenance burden. People can add equivalents for the other macros if
they need them.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120134437.1179191-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TAS5806M, TAS5806MD, TAS5830 has on-chip DSP without current/voltage
feedback, and in same family with TAS58XX.
TAS2568, TAS2574 is in family with TAS257X.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20251117102153.30644-2-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add companion amp into the list of allowed SDCA Functions. More work
will be required to fully support companion amp, but this will let parts
including companion amp functions boot and it is a good first step to
proper support.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251111140617.2997454-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, on ASUS projects, the TAS2781 codec attaches the speaker GPIO
to the first tasdevice_priv instance using devm. This causes
tas2781_read_acpi to fail on subsequent probes since the GPIO is already
managed by the first device. This causes a failure on Xbox Ally X,
because it has two amplifiers, and prevents us from quirking both the
Xbox Ally and Xbox Ally X in the realtek codec driver.
It is unnecessary to attach the GPIO to a device as it is static.
Therefore, instead of attaching it and then reading it when loading the
firmware, read its value directly in tas2781_read_acpi and store it in
the private data structure. Then, make reading the value non-fatal so
that ASUS projects that miss a speaker pin can still work, perhaps using
fallback firmware.
Fixes: 4e7035a75da9 ("ALSA: hda/tas2781: Add speaker id check for ASUS projects")
Cc: stable@vger.kernel.org # 6.17
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Baojun Xu <baojun.xu@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251026191635.2447593-1-lkml@antheas.dev
For now the tables are basic for mockup devices
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251104121650.21872-4-peter.ujfalusi@linux.intel.com
Add an ALSA control (CAL_DATA) that can be used to restore amp calibration,
instead of using debugfs. A readback control (CAL_DATA_RB) is also added
for factory testing.
On ChromeOS the process that restores amp calibration from NVRAM has
limited permissions and cannot access debugfs. It requires an ALSA control
that it can write the calibration blob into. ChromeOS also restricts access
to ALSA controls, which avoids the risk of accidental or malicious
overwriting of good calibration data with bad data. As this control is not
needed for normal Linux-based distros it is a Kconfig option.
A separate control, CAL_DATA_RB, provides a readback of the current
calibration data, which could be either from a write to CAL_DATA or the
result of factory production-line calibration.
The write and read are intentionally separate controls to defeat "dumb"
save-and-restore tools like alsa-restore that assume it is safe to save
all control values and write them back in any order at some undefined
future time. Such behavior carries the risk of restoring stale or bad data
over the top of good data.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251111130850.513969-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Create an ALSA control to read the value of the firmware
CAL_SET_STATUS control. This reports whether the firmware is
using a calibration blob or the default calibration from the
.bin file.
The firmware only reports a valid value in this register while
audio is actually playing and the internal PLL is locked to the
audio clock. Otherwise it returns a status of "unknown".
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251111130850.513969-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adjust the error codes returned by the calibration debugfs files
to provide a wider range of errors and make them more consistent.
There is a limited number of standard errors and it's not always
easy to find an error code that accurately describes what happened.
Additionally, user code often uses strerror() or something similar
to report a generic error description. The original calibration
code used a limited set of errors to attempt to avoid user error
strings that would be confusing or unclear on a file read/write.
However, this restricts the ability to provide informative errors.
This limited error range didn't help very much with debugging so
it has been expanded, rather than worrying about what strerror()
would return.
The errors are now more consistent:
ENXIO Calibration is not supported by the driver.
EOPNOTSUPP The given calibration command is not supported.
EBUSY Cannot calibrate because the amp is playing audio.
ERANGE Calibration result was out-of-range.
ETIMEDOUT Calibration did not complete.
EMSGSIZE Blob written to cal_data is the wrong size.
ENODATA No calibration data available to read from cal_data,
or
Blob written to cal_data does not contain calibration,
or
No calibration data available to save to UEFI.
EIO General failure to communicate with the firmware, mainly
indicating that firmware controls are missing.
EINVAL Has its normal meaning that an invalid argument was passed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251110114327.84370-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDCA specification uses Q7.8 volume format.
This patch adds a field to indicate whether it is SDCA volume control
and supports the volume settings.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251106093335.1363237-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Next installment of the SDCA changes, hopefully the next series after
this should be the full class driver. It is worth noting this series has
a build dependency on a patch working its way through the PM/ACPI tree:
commit ac46f5b6c661 ("ACPICA: Add SoundWire File Table (SWFT) signature")
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
But we can probably worry about that later, as normally there is a
reasonable amount of review on these SDCA series'.
This series broadly breaks down into 3 chunks, first there are several
changes to remove the assumption that the struct device used for SDCA
purposes represents the SoundWire slave. This is because the SDCA class
driver will be made of an auxiliary driver for each SDCA Function, thus
the SoundWire slave will be on the parent device for each individual
driver. Then there are patches to add support for UMP/FDL. And then
finally since the rest of the HID support is there and UMP was the last
missing part required a small patch to add a function to allow reporting
of HID events from SDCA devices.
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Until now, all products with an amplifier supported by the cs35l56 driver
have shipped with Microsoft Windows pre-installed. The factory calibration
of speaker protection has therefore been done using the Windows driver.
However, products that ship with a Linux-based distro must be able to
perform the factory calibration procedure from within the Linux-based
environment. This patch series adds that support.
NOTE: unfortunately this is yet another series that is mainly ASoC but
also needs some changes to the HDA driver, and they have build dependencies
on the ASoC code. I suggest taking this all through Mark's tree and we'll
avoid sending any other commits to the HDA driver until it has all landed
in Takashi's tree.
Now full support for the UMP buffers is available, it is possible to
read the SDCA HID descriptors from the device and pass them to
user-space. Add a helper function to process HID events from an SDCA
device.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-20-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some IRQs (FDL) require processing before the primary soundcard is
brought up, as the downloaded files could be firmware required for
operation of the audio functions of the device. Add a new helper
function which registers the required IRQs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-19-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Several of the UMP transactions in the FDL process should timeout if the
device does not respond within a certain time, add handling into the UMP
helpers and the FDL code to handle this.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-18-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some completions and a helper function to allow other parts of the
system to wait for FDL to complete. The sdca_fdl_sync() function will
wait until it completes a full time out without a new FDL request
happening, this ensures that even parts requiring multiple rounds of FDL
should be fully downloaded before the driver boot continues.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-17-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some instances of the XU Entity have a need for Files to be downloaded
from the Host. In these XUs, there is one instance of a Host to Device
(Consumer) UMP, identified by the FDL_CurrentOwner Control. FDL Library
introduced here implements the FDL flow triggered by FDL_CurrentOwner
irq, which sends a file from SoundWire File Table (SWFT) or from the
firmware directory in specific cases, to the Device FDL UMP.
Currently only Direct method of FDL is implemented.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-15-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add parsing of ACPI DisCo information specific to FDL (File DownLoad).
DisCo contains a list of File Sets which can be requested by the device
and within each of those a list of individual files to be downloaded to
the device. Optionally the contents of the files may also be present in
a special ACPI table, called SWFT (SoundWire File Table).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-14-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper functions for handling Universal Message Passing (UMP)
buffers on SDCA devices. These are generic mechanisms to pass blocks of
binary data between the host and the device, in both directions. They
are used for things like passing HID descriptors and the File Download
process.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-13-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse the DisCo property to get the timeout for a Function Reset.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-12-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse the DisCo properties for XU Entities.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Whilst SDCA does specify an Access Mode for each Control, there is not a
1-to-1 mapping between that and ASoC's internal representation. Some
registers require being treated as volatile from the hosts perspective
even in their Access Mode is Read-Write. Add an explicit list of SDCA
controls that should be forced volatile.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the future some IRQs (mostly the UMPs used during File
DownLoad) will need to run after the device has enumerated on the
bus but before the soundcard is actually constructed. As such
refactor more of the IRQ handling to use raw device and regmap
pointers, rather than accessing things through the component.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently there is a flag to indicate if an IRQ has been requested by
something outside the SDCA core, such that the core can skip requesting
that IRQ. However, it is simpler and more useful to always store the
allocated IRQ number. This will allow the core to see if the IRQ has
been requested, to perform additional operations on the IRQ, and
request IRQs in multiple phases.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Store a copy of the device register map in the structure for the IRQ
handlers. This will allow the individual IRQ handlers access to the
device level register map if required.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDCA HID code can't assume that the struct device it is passed is
the SoundWire slave device. HID is represented by a Function in SDCA and
will thus likely be implemented by a child driver. Update the code to
explicitly pass in the SoundWire slave device.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a set of test cases for cs_amp_set_efi_calibration_data().
Broadly there are two type of behavior being tested:
How the EFI is updated:
- Create a new EFI
- Overwrite part of existing content
- Overwrite part of zero-filled preallocated content
- Grow the file to append new content
And how the location within the content is chosen:
- Overwrite a specific array entry
- Overwrite an entry with the same calTarget (silicon ID)
- Overwrite a free entry
- Append after existing data
Plus some cases for error conditions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new command 'store_uefi' to the calibrate debugfs file.
Writing this command will call cs_amp_set_efi_calibration_data()
to save the new data into a UEFI variable. This is intended to
be used after a successful factory calibration.
On systems without UEFI the write to the debugfs file will
return an error.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-10-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add cs_amp_set_efi_calibration_data() to write an amp calibration
blob to UEFI calibration variable.
The UEFI variable will be updated or created as necessary.
- If a Vendor-specific variable exists it will be updated,
else if the Cirrus variable exists it will be update
else the Cirrus variable will be created.
Some collateral changes are required:
- cs_amp_convert_efi_status() now specifically handles
EFI_WRITE_PROTECTED error.
- cs_amp_get_cal_efi_buffer() can optionally return the name,
guid and attr of the variable it found.
- cs_amp_get_cal_efi_buffer() will update the 'size' field of
the returned data blob if it is zero. The BIOS could have
pre-allocated the UEFI variable as zero-filled
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
