This patch fixes the edge case behavior on ifup/ifdown and
linking/unlinking two netdevsim interfaces:
1. unlink two interfaces netdevsim1 and netdevsim2
2. ifdown netdevsim1
3. ifup netdevsim1
4. link two interfaces netdevsim1 and netdevsim2
5. (Now two interfaces are linked in terms of netdevsim peer, but
carrier state of the two interfaces remains DOWN.)
This inconsistent behavior is caused by the current implementation,
which only cares about the "link, then ifup" order, not "ifup, then
link" order. This patch fixes the inconsistency by calling
netif_carrier_on() when two netdevsim interfaces are linked.
This patch fixes buggy behavior on NetworkManager-based systems which
causes the netdevsim test to fail with the following error:
# timeout set to 600
# selftests: drivers/net/netdevsim: peer.sh
# 2025/12/25 00:54:03 socat[9115] W address is opened in read-write mode but only supports read-only
# 2025/12/25 00:56:17 socat[9115] W connect(7, AF=2 192.168.1.1:1234, 16): Connection timed out
# 2025/12/25 00:56:17 socat[9115] E TCP:192.168.1.1🔢 Connection timed out
# expected 3 bytes, got 0
# 2025/12/25 00:56:17 socat[9109] W exiting on signal 15
not ok 13 selftests: drivers/net/netdevsim: peer.sh # exit=1
This patch also solves timeout on TCP Fast Open (TFO) test in
NetworkManager-based systems because it also depends on netdevsim's
carrier consistency.
Fixes: 1a8fed52f7be ("netdevsim: set the carrier when the device goes up")
Signed-off-by: Yohei Kojima <yk@y-koj.net>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/602c9e1ba5bb2ee1997bb38b1d866c9c3b807ae9.1767624906.git.yk@y-koj.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pp_alloc_fail.py test (which doesn't run in NIPA CI?) uses tool, add
back the import.
Resolves:
ImportError: cannot import name 'tool' from 'lib.py'
Fixes: 68a052239fc4 ("selftests: drv-net: update remaining Python init files")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20260105163319.47619-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We expect the SFP write accessors to return the number of written bytes.
We fail to do so for single-byte smbus accesses, which may cause errors
when setting a module's high-power state and for some cotsworks modules.
Let's return the amount of written bytes, as expected.
Fixes: 7662abf4db94 ("net: phy: sfp: Add support for SMBus module access")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260105151840.144552-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 926eae604403acfa27ba5b072af458e87e634a50, which
never could have produced the intended effect:
https://lore.kernel.org/netdev/AM0PR06MB10396BBF8B568D77556FC46F8F7DEA@AM0PR06MB10396.eurprd06.prod.outlook.com/
The reason why it is broken beyond repair in this form is that the
mv88e6xxx driver outsources its "tx-p2p-microvolt" property to the OF
node of an external Ethernet PHY. This:
(a) does not work if there is no external PHY (chip-to-chip connection,
or SFP module)
(b) pollutes the OF property namespace / bindings of said external PHY
("tx-p2p-microvolt" could have meaning for the Ethernet PHY's SerDes
interface as well)
We can revisit the idea of making SerDes amplitude configurable once we
have proper bindings for the mv88e6xxx SerDes. Until then, remove the
code that leaves us with unnecessary baggage.
Fixes: 926eae604403 ("dsa: mv88e6xxx: make serdes SGMII/Fiber tx amplitude configurable")
Cc: Holger Brunck <holger.brunck@hitachienergy.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260104093952.486606-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add Raju Rangoju as an additional maintainer to support the AMD XGBE
network device driver.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20251211112831.1781030-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If vport flags do not contain VIRTCHNL2_VPORT_ENABLE_RDMA, driver does not
allocate vdev_info for this vport. This leads to kernel NULL pointer
dereference in idpf_idc_vport_dev_down(), which references vdev_info for
every vport regardless.
Check, if vdev_info was ever allocated before unplugging aux device.
Fixes: be91128c579c ("idpf: implement RDMA vport auxiliary dev create, init, and destroy")
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The HW only supports a maximum Rx buffer size of 16K-128. On systems
using large pages, the libeth logic can configure the buffer size to be
larger than this. The upper bound is PAGE_SIZE while the lower bound is
MTU rounded up to the nearest power of 2. For example, ARM systems with
a 64K page size and an mtu of 9000 will set the Rx buffer size to 16K,
which will cause the config Rx queues message to fail.
Initialize the bufq/fill queue buf_len field to the maximum supported
size. This will trigger the libeth logic to cap the maximum Rx buffer
size by reducing the upper bound.
Fixes: 74d1412ac8f37 ("idpf: use libeth Rx buffer management for payload buffer")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: David Decotigny <ddecotig@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix error handling to properly cleanup interrupts when
idpf_vport_queue_ids_init() or idpf_rx_bufs_init_all() fail. Jump to
'intr_deinit' instead of 'queues_rel' to ensure interrupts are cleaned up
before releasing other resources.
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.
After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.
Steps to reproduce:
** Bring the interface down (if up)
ifconfig eth1 down
** update the queue count (eg., 27->20)
ethtool -L eth1 combined 20
** display the RSS LUT
ethtool -x eth1
[82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000
[82375.558373] #PF: supervisor read access in kernel mode
[82375.558391] #PF: error_code(0x0000) - not-present page
[82375.558408] PGD 0 P4D 0
[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf]
[82375.558786] Call Trace:
[82375.558793] <TASK>
[82375.558804] rss_prepare.isra.0+0x187/0x2a0
[82375.558827] rss_prepare_data+0x3a/0x50
[82375.558845] ethnl_default_doit+0x13d/0x3e0
[82375.558863] genl_family_rcv_msg_doit+0x11f/0x180
[82375.558886] genl_rcv_msg+0x1ad/0x2b0
[82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10
[82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10
[82375.558937] netlink_rcv_skb+0x58/0x100
[82375.558957] genl_rcv+0x2c/0x50
[82375.558971] netlink_unicast+0x289/0x3e0
[82375.558988] netlink_sendmsg+0x215/0x440
[82375.559005] __sys_sendto+0x234/0x240
[82375.559555] __x64_sys_sendto+0x28/0x30
[82375.560068] x64_sys_call+0x1909/0x1da0
[82375.560576] do_syscall_64+0x7a/0xfa0
[82375.561076] ? clear_bhb_loop+0x60/0xb0
[82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<snip>
Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
RSS LUT provisioning and queries on a down interface currently return
silently without effect. Users should be able to configure RSS settings
even when the interface is down.
Fix by maintaining RSS configuration changes in the driver's soft copy and
deferring HW programming until the interface comes up.
Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The RSS LUT is not initialized until the interface comes up, causing
the following NULL pointer crash when ethtool operations like rxhash on/off
are performed before the interface is brought up for the first time.
Move RSS LUT initialization from ndo_open to vport creation to ensure LUT
is always available. This enables RSS configuration via ethtool before
bringing the interface up. Simplify LUT management by maintaining all
changes in the driver's soft copy and programming zeros to the indirection
table when rxhash is disabled. Defer HW programming until the interface
comes up if it is down during rxhash and LUT configuration changes.
Steps to reproduce:
** Load idpf driver; interfaces will be created
modprobe idpf
** Before bringing the interfaces up, turn rxhash off
ethtool -K eth2 rxhash off
[89408.371875] BUG: kernel NULL pointer dereference, address: 0000000000000000
[89408.371908] #PF: supervisor read access in kernel mode
[89408.371924] #PF: error_code(0x0000) - not-present page
[89408.371940] PGD 0 P4D 0
[89408.371953] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[89408.372052] RIP: 0010:memcpy_orig+0x16/0x130
[89408.372310] Call Trace:
[89408.372317] <TASK>
[89408.372326] ? idpf_set_features+0xfc/0x180 [idpf]
[89408.372363] __netdev_update_features+0x295/0xde0
[89408.372384] ethnl_set_features+0x15e/0x460
[89408.372406] genl_family_rcv_msg_doit+0x11f/0x180
[89408.372429] genl_rcv_msg+0x1ad/0x2b0
[89408.372446] ? __pfx_ethnl_set_features+0x10/0x10
[89408.372465] ? __pfx_genl_rcv_msg+0x10/0x10
[89408.372482] netlink_rcv_skb+0x58/0x100
[89408.372502] genl_rcv+0x2c/0x50
[89408.372516] netlink_unicast+0x289/0x3e0
[89408.372533] netlink_sendmsg+0x215/0x440
[89408.372551] __sys_sendto+0x234/0x240
[89408.372571] __x64_sys_sendto+0x28/0x30
[89408.372585] x64_sys_call+0x1909/0x1da0
[89408.372604] do_syscall_64+0x7a/0xfa0
[89408.373140] ? clear_bhb_loop+0x60/0xb0
[89408.373647] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[89408.378887] </TASK>
<snip>
Fixes: a251eee62133 ("idpf: add SRIOV support and other ndo_ops")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When ethtool -n is executed on an interface to display the flow steering
rules, "rxclass: Unknown flow type" error is generated.
The flow steering list maintained in the driver currently stores only the
location and q_index but other fields of the ethtool_rx_flow_spec are not
stored. This may be enough for the virtchnl command to delete the entry.
However, when the ethtool -n command is used to query the flow steering
rules, the ethtool_rx_flow_spec returned is not complete causing the
error below.
Resolve this by storing the flow spec (fsp) when rules are added and
returning the complete flow spec when rules are queried.
Also, change the return value from EINVAL to ENOENT when flow steering
entry is not found during query by location or when deleting an entry.
Add logic to detect and reject duplicate filter entries at the same
location and change logic to perform upfront validation of all error
conditions before adding flow rules through virtchnl. This avoids the
need for additional virtchnl delete messages when subsequent operations
fail, which was missing in the original upstream code.
Example:
Before the fix:
ethtool -n eth1
2 RX rings available
Total 2 rules
rxclass: Unknown flow type
rxclass: Unknown flow type
After the fix:
ethtool -n eth1
2 RX rings available
Total 2 rules
Filter: 0
Rule Type: TCP over IPv4
Src IP addr: 10.0.0.1 mask: 0.0.0.0
Dest IP addr: 0.0.0.0 mask: 255.255.255.255
TOS: 0x0 mask: 0xff
Src port: 0 mask: 0xffff
Dest port: 0 mask: 0xffff
Action: Direct to queue 0
Filter: 1
Rule Type: UDP over IPv4
Src IP addr: 10.0.0.1 mask: 0.0.0.0
Dest IP addr: 0.0.0.0 mask: 255.255.255.255
TOS: 0x0 mask: 0xff
Src port: 0 mask: 0xffff
Dest port: 0 mask: 0xffff
Action: Direct to queue 0
Fixes: ada3e24b84a0 ("idpf: add flow steering support")
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Co-developed-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The flow steering list maintains entries that are added and removed as
ethtool creates and deletes flow steering rules. Module removal with active
entries causes memory leak as the list is not properly cleaned up.
Prevent this by iterating through the remaining entries in the list and
freeing the associated memory during module removal. Add a spinlock
(flow_steer_list_lock) to protect the list access from multiple threads.
Fixes: ada3e24b84a0 ("idpf: add flow steering support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If the init_task fails during a driver load, we end up without vports and
netdevs, effectively failing the entire process. In that state a
subsequent reset will result in a crash as the service task attempts to
access uninitialized resources. Following trace is from an error in the
init_task where the CREATE_VPORT (op 501) is rejected by the FW:
[40922.763136] idpf 0000:83:00.0: Device HW Reset initiated
[40924.449797] idpf 0000:83:00.0: Transaction failed (op 501)
[40958.148190] idpf 0000:83:00.0: HW reset detected
[40958.161202] BUG: kernel NULL pointer dereference, address: 00000000000000a8
...
[40958.168094] Workqueue: idpf-0000:83:00.0-vc_event idpf_vc_event_task [idpf]
[40958.168865] RIP: 0010:idpf_vc_event_task+0x9b/0x350 [idpf]
...
[40958.177932] Call Trace:
[40958.178491] <TASK>
[40958.179040] process_one_work+0x226/0x6d0
[40958.179609] worker_thread+0x19e/0x340
[40958.180158] ? __pfx_worker_thread+0x10/0x10
[40958.180702] kthread+0x10f/0x250
[40958.181238] ? __pfx_kthread+0x10/0x10
[40958.181774] ret_from_fork+0x251/0x2b0
[40958.182307] ? __pfx_kthread+0x10/0x10
[40958.182834] ret_from_fork_asm+0x1a/0x30
[40958.183370] </TASK>
Fix the error handling in the init_task to make sure the service and
mailbox tasks are disabled if the error happens during load. These are
started in idpf_vc_core_init(), which spawns the init_task and has no way
of knowing if it failed. If the error happens on reset, following
successful driver load, the tasks can still run, as that will allow the
netdevs to attempt recovery through another reset. Stop the PTP callbacks
either way as those will be restarted by the call to idpf_vc_core_init()
during a successful reset.
Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration")
Reported-by: Vivek Kumar <iamvivekkumar@google.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.
idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.
The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.
idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.
Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf> UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf> DOWN
ip link set <inf> up
ip -br a
<inf> DOWN
Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637] <TASK>
[408508.140077] __dev_close_many+0xbb/0x260
[408508.140533] __dev_change_flags+0x1cf/0x280
[408508.140987] netif_change_flags+0x26/0x70
[408508.141434] dev_change_flags+0x3d/0xb0
[408508.141878] devinet_ioctl+0x460/0x890
[408508.142321] inet_ioctl+0x18e/0x1d0
[408508.142762] ? _copy_to_user+0x22/0x70
[408508.143207] sock_do_ioctl+0x3d/0xe0
[408508.143652] sock_ioctl+0x10e/0x330
[408508.144091] ? find_held_lock+0x2b/0x80
[408508.144537] __x64_sys_ioctl+0x96/0xe0
[408508.144979] do_syscall_64+0x79/0x3d0
[408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff
Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We originally protected PIDFD_GET_<ns-type>_NAMESPACE ioctls() through
ifdefs and recent rework made it possible to drop them. There was an
oversight though. When the relevant namespace is turned off ns->ops will
be NULL so even though opening a file descriptor is perfectly legitimate
it would fail during inode eviction when the file was closed.
The simple fix would be to check ns->ops for NULL and continue allow to
retrieve namespace fds from pidfds but we don't allow retrieving them
when the relevant namespace type is turned off. So keep the
simplification but add the ifdefs back in.
Link: https://lore.kernel.org/20251222214907.GA189632@quark
Link: https://patch.msgid.link/20251224-ununterbrochen-gagen-ea949b83f8f2@brauner
Fixes: a71e4f103aed ("pidfs: simplify PIDFD_GET_<type>_NAMESPACE ioctls")
Tested-by: Brendan Jackman <jackmanb@kernel.org>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove the explicit import of CStrExt. When CONFIG_PRINTK is disabled
this import causes a build error:
error: unused import: `crate::str::CStrExt`
--> rust/kernel/device.rs:17:5
|
17 | use crate::str::CStrExt as _;
| ^^^^^^^^^^^^^^^^^^^
|
= note: `-D unused-imports` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(unused_imports)]`
error: aborting due to 1 previous error
CStrExt is covered by prelude::* so the explicit import is redundant.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Fixes: 3b83f5d5e78a ("rust: replace `CStr` with `core::ffi::CStr`")
Link: https://patch.msgid.link/20260106000320.2593800-1-fujita.tomonori@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Fix a typo in the doc-comment of the Bar structure: 'inststance ->
instance'.
Add also 'is' to the comment inside Bar's `new()` function (suggested
by Dirk):
// `pdev` is valid by the invariants of `Device`.
Fixes: bf9651f84b4e ("rust: pci: implement I/O mappable `pci::Bar`")
Suggested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Marko Turk <mt@markoturk.info>
Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://patch.msgid.link/20260105213726.73000-2-mt@markoturk.info
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
During a successful reset the driver would re-allocate vport resources
while keeping the netdevs intact. However, in case of an error in the
init task, the netdev of the failing vport will be unregistered,
effectively removing the network interface:
[ 121.211076] idpf 0000:83:00.0: enabling device (0100 -> 0102)
[ 121.221976] idpf 0000:83:00.0: Device HW Reset initiated
[ 124.161229] idpf 0000:83:00.0 ens801f0: renamed from eth0
[ 124.163364] idpf 0000:83:00.0 ens801f0d1: renamed from eth1
[ 125.934656] idpf 0000:83:00.0 ens801f0d2: renamed from eth2
[ 128.218429] idpf 0000:83:00.0 ens801f0d3: renamed from eth3
ip -br a
ens801f0 UP
ens801f0d1 UP
ens801f0d2 UP
ens801f0d3 UP
echo 1 > /sys/class/net/ens801f0/device/reset
[ 145.885537] idpf 0000:83:00.0: resetting
[ 145.990280] idpf 0000:83:00.0: reset done
[ 146.284766] idpf 0000:83:00.0: HW reset detected
[ 146.296610] idpf 0000:83:00.0: Device HW Reset initiated
[ 211.556719] idpf 0000:83:00.0: Transaction timed-out (op:526 cookie:7700 vc_op:526 salt:77 timeout:60000ms)
[ 272.996705] idpf 0000:83:00.0: Transaction timed-out (op:502 cookie:7800 vc_op:502 salt:78 timeout:60000ms)
ip -br a
ens801f0d1 DOWN
ens801f0d2 DOWN
ens801f0d3 DOWN
Re-shuffle the logic in the error path of the init task to make sure the
netdevs remain intact. This will allow the driver to attempt recovery via
subsequent resets, provided the FW is still functional.
The main change is to make sure that idpf_decfg_netdev() is not called
should the init task fail during a reset. The error handling is
consolidated under unwind_vports, as the removed labels had the same
cleanup logic split depending on the point of failure.
Fixes: ce1b75d0635c ("idpf: add ptypes and MAC filter support")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
A set of NFSD fixes that arrived after the 6.19 merge window.
Issues that need expedient stable backports:
- Remove an invalid NFS status code
- Fix an fstests failure when using pNFS
- Fix a UAF in v4_end_grace()
- Fix the administrative interface used to revoke NFSv4 state
- Fix a memory leak reported by syzbot
-----BEGIN PGP SIGNATURE-----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=okQh
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"A set of NFSD fixes for stable that arrived after the merge window:
- Remove an invalid NFS status code
- Fix an fstests failure when using pNFS
- Fix a UAF in v4_end_grace()
- Fix the administrative interface used to revoke NFSv4 state
- Fix a memory leak reported by syzbot"
* tag 'nfsd-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: net ref data still needs to be freed even if net hasn't startup
nfsd: check that server is running in unlock_filesystem
nfsd: use correct loop termination in nfsd4_revoke_states()
nfsd: provide locking for v4_end_grace
NFSD: Fix permission check for read access to executable-only files
NFSD: Remove NFSERR_EAGAIN
loop_set_status() is allowed to change the loop device while there
are other openers of the device, even exclusive ones.
In this case, it causes a KASAN: slab-out-of-bounds Read in
ext4_search_dir(), since when looking for an entry in an inlined
directory, e_value_offs is changed underneath the filesystem by
loop_set_status().
Fix the problem by forbidding loop_set_status() from modifying the loop
device while there are exclusive openers of the device. This is similar
to the fix in loop_configure() by commit 33ec3e53e7b1 ("loop: Don't
change loop device under exclusive opener") alongside commit ecbe6bc0003b
("block: use bd_prepare_to_claim directly in the loop driver").
Reported-by: syzbot+3ee481e21fd75e14c397@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3ee481e21fd75e14c397
Tested-by: syzbot+3ee481e21fd75e14c397@syzkaller.appspotmail.com
Tested-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Signed-off-by: Raphael Pinsonneault-Thibeault <rpthibeault@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As EFI runtime services can now be run without disabling preemption remove
the check for non preemptible in current_in_efi(). Without this change,
firmware errors that were previously recovered from by
__efi_runtime_kernel_fixup_exception() will lead to a kernel oops.
Fixes: a5baf582f4c0 ("arm64/efi: Call EFI runtime services without disabling preemption")
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some systems ship with multiple display class devices but not all
of them are VGA devices. If the "only" VGA device on the system is not
used for displaying the image on the screen marking it as `boot_vga`
because nothing was found is totally wrong.
This behavior actually leads to mistakes of the wrong device being
advertised to userspace and then userspace can make incorrect decisions.
As there is an accurate `boot_display` sysfs file stop lying about
`boot_vga` by assuming if nothing is found it's the right device.
Reported-by: Aaron Erhardt <aer@tuxedocomputers.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220712
Tested-by: Aaron Erhardt <aer@tuxedocomputers.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: ad90860bd10ee ("fbcon: Use screen info to find primary device")
Tested-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260106044638.52906-1-superm1@kernel.org
When skb_segment_list() is called during packet forwarding, it handles
packets that were aggregated by the GRO engine.
Historically, the segmentation logic in skb_segment_list assumes that
individual segments are split from a parent SKB and may need to carry
their own socket memory accounting. Accordingly, the code transfers
truesize from the parent to the newly created segments.
Prior to commit ed4cccef64c1 ("gro: fix ownership transfer"), this
truesize subtraction in skb_segment_list() was valid because fragments
still carry a reference to the original socket.
However, commit ed4cccef64c1 ("gro: fix ownership transfer") changed
this behavior by ensuring that fraglist entries are explicitly
orphaned (skb->sk = NULL) to prevent illegal orphaning later in the
stack. This change meant that the entire socket memory charge remained
with the head SKB, but the corresponding accounting logic in
skb_segment_list() was never updated.
As a result, the current code unconditionally adds each fragment's
truesize to delta_truesize and subtracts it from the parent SKB. Since
the fragments are no longer charged to the socket, this subtraction
results in an effective under-count of memory when the head is freed.
This causes sk_wmem_alloc to remain non-zero, preventing socket
destruction and leading to a persistent memory leak.
The leak can be observed via KMEMLEAK when tearing down the networking
environment:
unreferenced object 0xffff8881e6eb9100 (size 2048):
comm "ping", pid 6720, jiffies 4295492526
backtrace:
kmem_cache_alloc_noprof+0x5c6/0x800
sk_prot_alloc+0x5b/0x220
sk_alloc+0x35/0xa00
inet6_create.part.0+0x303/0x10d0
__sock_create+0x248/0x640
__sys_socket+0x11b/0x1d0
Since skb_segment_list() is exclusively used for SKB_GSO_FRAGLIST
packets constructed by GRO, the truesize adjustment is removed.
The call to skb_release_head_state() must be preserved. As documented in
commit cf673ed0e057 ("net: fix fraglist segmentation reference count
leak"), it is still required to correctly drop references to SKB
extensions that may be overwritten during __copy_skb_header().
Fixes: ed4cccef64c1 ("gro: fix ownership transfer")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260104213101.352887-1-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the reference to 'boot-image-header.rst', which was moved to
'Documentation/arch/riscv/' in commit 'ed843ae947f8'
("docs: move riscv under arch").
Signed-off-by: Soham Metha <sohammetha01@gmail.com>
Link: https://patch.msgid.link/20251203194355.63265-1-sohammetha01@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The phrasing of the page-pool-get doc is very confusing.
It's supposed to highlight that support depends on the driver
doing its part but it sounds like orphaned page pools won't
be visible.
The description of the ifindex is completely wrong.
We move the page pool to loopback and skip the attribute if
ifindex is loopback.
Link: https://lore.kernel.org/20260104084347.5de3a537@kernel.org
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20260104165232.710460-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These marcos are not used after commit b5b4287accd7 ("riscv: mm: Use
hint address in mmap if available"). Cleanup VA_USER_XXX definitions
in asm/pgtable.h.
Fixes: b5b4287accd7 ("riscv: mm: Use hint address in mmap if available")
Signed-off-by: Guo Ren (Alibaba DAMO Academy) <guoren@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20251201005850.702569-1-guoren@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The Zk extension is a bundle consisting of Zkn, Zkr, and Zkt. The Zkn
extension itself is a bundle consisting of Zbkb, Zbkc, Zbkx, Zknd, Zkne,
and Zknh.
The current implementation of riscv_zk_bundled_exts manually listed
the dependencies but missed RISCV_ISA_EXT_ZKNH.
Fix this by introducing a RISCV_ISA_EXT_ZKN macro that lists the Zkn
components and using it in both riscv_zk_bundled_exts and
riscv_zkn_bundled_exts.
This adds the missing Zknh extension to Zk and reduces code duplication.
Fixes: 0d8295ed975b ("riscv: add ISA extension parsing for scalar crypto")
Link: https://patch.msgid.link/20231114141256.126749-4-cleger@rivosinc.com/
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Link: https://patch.msgid.link/20251223-zk-missing-zknh-v1-1-b627c990ee1a@riscstar.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Compiler reports potential uses of uninitialized variables in
mptcp_connect.c when xerror() is called from failure paths.
mptcp_connect.c:1262:11: warning: variable 'raw_addr' is used
uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
xerror() terminates execution by calling exit(), but it is not visible
to the compiler & assumes control flow may continue past the call.
Annotate xerror() with __noreturn so the compiler can correctly reason
about control flow and avoid false-positive uninitialized variable
warnings.
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Link: https://patch.msgid.link/20260101172840.90186-1-ankitkhushwaha.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jamal Hadi Salim says:
====================
net/sched: Fix memory leak on mirred loop
Initialize at_ingress earlier before the if statement.
====================
Link: https://patch.msgid.link/20260101135608.253079-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Whenever a mirred redirect to self on egress happens, mirred allocates a
new skb (skb_to_send). The loop to self check was done after that
allocation, but was not freeing the newly allocated skb, causing a leak.
Fix this by moving the if-statement to before the allocation of the new
skb.
The issue was found by running the accompanying tdc test in 2/2
with config kmemleak enabled.
After a few minutes the kmemleak thread ran and reported the leak coming from
mirred.
Fixes: 1d856251a009 ("net/sched: act_mirred: fix loop detection")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260101135608.253079-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a filesystem is missing its data reloc tree, we get something like
this in dmesg:
BTRFS warning (device loop11): failed to read root (objectid=4): -2
BTRFS error (device loop11): open_ctree failed: -2
objectid is BTRFS_DEV_TREE_OBJECTID, but this should actually be the
value of BTRFS_DATA_RELOC_TREE_OBJECTID.
btrfs_read_roots() prints location.objectid on failure, but this isn't
set when reading the data reloc tree. Set location.objectid to the
correct value on failure, so that the error message makes sense.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Coverity reported a NULL pointer dereference issue (CID 1666756) in
do_abort_log_replay(). When btrfs_alloc_path() fails in
replay_one_buffer(), wc->subvol_path is NULL, but btrfs_abort_log_replay()
calls do_abort_log_replay() which unconditionally dereferences
wc->subvol_path when attempting to print debug information. Fix this by
adding a NULL check before dereferencing wc->subvol_path in
do_abort_log_replay().
Fixes: 2753e4917624 ("btrfs: dump detailed info and specific messages on log replay failures")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Currently we only enforcing the free space tree for bs < ps cases, but
with the recently added bs > ps support, we lack the free space tree
enforcing, causing explicit v1 cache mount option to fail on bs > ps
cases:
# mount -o space_cache=v1 /dev/test/scratch1 /mnt/btrfs/
mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/mapper/test-scratch1, missing codepage or helper program, or other error.
dmesg(1) may have more information after failed mount system call.
# dmesg -t | tail -n7
BTRFS: device fsid ac14a6fa-4ec9-449e-aec9-7d1777bfdc06 devid 1 transid 11 /dev/mapper/test-scratch1 (253:3) scanned by mount (2849)
BTRFS info (device dm-3): first mount of filesystem ac14a6fa-4ec9-449e-aec9-7d1777bfdc06
BTRFS info (device dm-3): using crc32c checksum algorithm
BTRFS warning (device dm-3): support for block size 8192 with page size 4096 is experimental, some features may be missing
BTRFS warning (device dm-3): space cache v1 is being deprecated and will be removed in a future release, please use -o space_cache=v2
BTRFS warning (device dm-3): v1 space cache is not supported for page size 4096 with sectorsize 8192
BTRFS error (device dm-3): open_ctree failed: -22
[FIX]
Just enable the same free space tree for bs > ps cases, aligning the
behavior to bs < ps cases.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Since the introduction of btrfs bs < ps support, v1 cache was never on
the plan due to its hard coded PAGE_SIZE usage, and the future plan to
properly deprecate it.
However for bs < ps cases, even if 'nospace_cache,clear_cache' mount
option is specified, it's never respected and free space tree is always
enabled:
mkfs.btrfs -f -O ^bgt,fst $dev
mount $dev $mnt -o clear_cache,nospace_cache
umount $mnt
btrfs ins dump-super $dev
...
compat_ro_flags 0x3
( FREE_SPACE_TREE |
FREE_SPACE_TREE_VALID )
...
This means a different behavior compared to bs >= ps cases.
[CAUSE]
The forcing usage of v2 space cache is done inside
btrfs_set_free_space_cache_settings(), however it never checks if we're
even using space cache but always enabling v2 cache.
[FIX]
Instead unconditionally enable v2 cache, only forcing v2 cache if the
old v1 cache is required.
Now v2 space cache can be properly disabled on bs < ps cases:
mkfs.btrfs -f -O ^bgt,fst $dev
mount $dev $mnt -o clear_cache,nospace_cache
umount $mnt
btrfs ins dump-super $dev
...
compat_ro_flags 0x0
...
Fixes: 9f73f1aef98b ("btrfs: force v2 space cache usage for subpage mount")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_read_locked_inode() we are calling btrfs_init_file_extent_tree()
while holding a path with a read locked leaf from a subvolume tree, and
btrfs_init_file_extent_tree() may do a GFP_KERNEL allocation, which can
trigger reclaim.
This can create a circular lock dependency which lockdep warns about with
the following splat:
[6.1433] ======================================================
[6.1574] WARNING: possible circular locking dependency detected
[6.1583] 6.18.0+ #4 Tainted: G U
[6.1591] ------------------------------------------------------
[6.1599] kswapd0/117 is trying to acquire lock:
[6.1606] ffff8d9b6333c5b8 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1625]
but task is already holding lock:
[6.1633] ffffffffa4ab8ce0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x195/0xc60
[6.1646]
which lock already depends on the new lock.
[6.1657]
the existing dependency chain (in reverse order) is:
[6.1667]
-> #2 (fs_reclaim){+.+.}-{0:0}:
[6.1677] fs_reclaim_acquire+0x9d/0xd0
[6.1685] __kmalloc_cache_noprof+0x59/0x750
[6.1694] btrfs_init_file_extent_tree+0x90/0x100
[6.1702] btrfs_read_locked_inode+0xc3/0x6b0
[6.1710] btrfs_iget+0xbb/0xf0
[6.1716] btrfs_lookup_dentry+0x3c5/0x8e0
[6.1724] btrfs_lookup+0x12/0x30
[6.1731] lookup_open.isra.0+0x1aa/0x6a0
[6.1739] path_openat+0x5f7/0xc60
[6.1746] do_filp_open+0xd6/0x180
[6.1753] do_sys_openat2+0x8b/0xe0
[6.1760] __x64_sys_openat+0x54/0xa0
[6.1768] do_syscall_64+0x97/0x3e0
[6.1776] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[6.1784]
-> #1 (btrfs-tree-00){++++}-{3:3}:
[6.1794] lock_release+0x127/0x2a0
[6.1801] up_read+0x1b/0x30
[6.1808] btrfs_search_slot+0x8e0/0xff0
[6.1817] btrfs_lookup_inode+0x52/0xd0
[6.1825] __btrfs_update_delayed_inode+0x73/0x520
[6.1833] btrfs_commit_inode_delayed_inode+0x11a/0x120
[6.1842] btrfs_log_inode+0x608/0x1aa0
[6.1849] btrfs_log_inode_parent+0x249/0xf80
[6.1857] btrfs_log_dentry_safe+0x3e/0x60
[6.1865] btrfs_sync_file+0x431/0x690
[6.1872] do_fsync+0x39/0x80
[6.1879] __x64_sys_fsync+0x13/0x20
[6.1887] do_syscall_64+0x97/0x3e0
[6.1894] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[6.1903]
-> #0 (&delayed_node->mutex){+.+.}-{3:3}:
[6.1913] __lock_acquire+0x15e9/0x2820
[6.1920] lock_acquire+0xc9/0x2d0
[6.1927] __mutex_lock+0xcc/0x10a0
[6.1934] __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1944] btrfs_evict_inode+0x20b/0x4b0
[6.1952] evict+0x15a/0x2f0
[6.1958] prune_icache_sb+0x91/0xd0
[6.1966] super_cache_scan+0x150/0x1d0
[6.1974] do_shrink_slab+0x155/0x6f0
[6.1981] shrink_slab+0x48e/0x890
[6.1988] shrink_one+0x11a/0x1f0
[6.1995] shrink_node+0xbfd/0x1320
[6.1002] balance_pgdat+0x67f/0xc60
[6.1321] kswapd+0x1dc/0x3e0
[6.1643] kthread+0xff/0x240
[6.1965] ret_from_fork+0x223/0x280
[6.1287] ret_from_fork_asm+0x1a/0x30
[6.1616]
other info that might help us debug this:
[6.1561] Chain exists of:
&delayed_node->mutex --> btrfs-tree-00 --> fs_reclaim
[6.1503] Possible unsafe locking scenario:
[6.1110] CPU0 CPU1
[6.1411] ---- ----
[6.1707] lock(fs_reclaim);
[6.1998] lock(btrfs-tree-00);
[6.1291] lock(fs_reclaim);
[6.1581] lock(&delayed_node->mutex);
[6.1874]
*** DEADLOCK ***
[6.1716] 2 locks held by kswapd0/117:
[6.1999] #0: ffffffffa4ab8ce0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x195/0xc60
[6.1294] #1: ffff8d998344b0e0 (&type->s_umount_key#40){++++}- {3:3}, at: super_cache_scan+0x37/0x1d0
[6.1596]
stack backtrace:
[6.1183] CPU: 11 UID: 0 PID: 117 Comm: kswapd0 Tainted: G U 6.18.0+ #4 PREEMPT(lazy)
[6.1185] Tainted: [U]=USER
[6.1186] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023
[6.1187] Call Trace:
[6.1187] <TASK>
[6.1189] dump_stack_lvl+0x6e/0xa0
[6.1192] print_circular_bug.cold+0x17a/0x1c0
[6.1194] check_noncircular+0x175/0x190
[6.1197] __lock_acquire+0x15e9/0x2820
[6.1200] lock_acquire+0xc9/0x2d0
[6.1201] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1204] __mutex_lock+0xcc/0x10a0
[6.1206] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1208] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1211] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1213] __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1215] btrfs_evict_inode+0x20b/0x4b0
[6.1217] ? lock_acquire+0xc9/0x2d0
[6.1220] evict+0x15a/0x2f0
[6.1222] prune_icache_sb+0x91/0xd0
[6.1224] super_cache_scan+0x150/0x1d0
[6.1226] do_shrink_slab+0x155/0x6f0
[6.1228] shrink_slab+0x48e/0x890
[6.1229] ? shrink_slab+0x2d2/0x890
[6.1231] shrink_one+0x11a/0x1f0
[6.1234] shrink_node+0xbfd/0x1320
[6.1236] ? shrink_node+0xa2d/0x1320
[6.1236] ? shrink_node+0xbd3/0x1320
[6.1239] ? balance_pgdat+0x67f/0xc60
[6.1239] balance_pgdat+0x67f/0xc60
[6.1241] ? finish_task_switch.isra.0+0xc4/0x2a0
[6.1246] kswapd+0x1dc/0x3e0
[6.1247] ? __pfx_autoremove_wake_function+0x10/0x10
[6.1249] ? __pfx_kswapd+0x10/0x10
[6.1250] kthread+0xff/0x240
[6.1251] ? __pfx_kthread+0x10/0x10
[6.1253] ret_from_fork+0x223/0x280
[6.1255] ? __pfx_kthread+0x10/0x10
[6.1257] ret_from_fork_asm+0x1a/0x30
[6.1260] </TASK>
This is because:
1) The fsync task is holding an inode's delayed node mutex (for a
directory) while calling __btrfs_update_delayed_inode() and that needs
to do a search on the subvolume's btree (therefore read lock some
extent buffers);
2) The lookup task, at btrfs_lookup(), triggered reclaim with the
GFP_KERNEL allocation done by btrfs_init_file_extent_tree() while
holding a read lock on a subvolume leaf;
3) The reclaim triggered kswapd which is doing inode eviction for the
directory inode the fsync task is using as an argument to
btrfs_commit_inode_delayed_inode() - but in that call chain we are
trying to read lock the same leaf that the lookup task is holding
while calling btrfs_init_file_extent_tree() and doing the GFP_KERNEL
allocation.
Fix this by calling btrfs_init_file_extent_tree() after we don't need the
path anymore and release it in btrfs_read_locked_inode().
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/linux-btrfs/6e55113a22347c3925458a5d840a18401a38b276.camel@linux.intel.com/
Fixes: 8679d2687c35 ("btrfs: initialize inode::file_extent_tree after i_mode has been set")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[POTENTIAL BUG]
If the system page size is 4K and fs block size is 8K, and max_inline
mount option is set to 6K, we can inline a 6K sized data extent.
Then a encoded write submitted a compressed extent which is at file
offset 0, and the compressed length is 6K, which is allowed to be inlined.
Now a read beyond page boundary is triggered inside write_extent_buffer()
from insert_inline_extent().
[CAUSE]
Currently the function __cow_file_range_inline() can only accept a
single folio.
For regular compressed write path, we always allocate the compressed
folios using the minimal order matching the block size, thus the
@compressed_folio should always cover a full fs block thus it is fine.
But for encoded writes, they allocate page size folios, this means we
can hit a case where the compressed data is smaller than block size but
still larger than page size, in that case __cow_file_range_inline() will
be called with @compressed_size larger than a page.
In that case we will trigger a read beyond the folio inside
insert_inline_extent().
Thankfully this is not that common, as the default max_inline is only
2048 bytes, smaller than PAGE_SIZE, and bs > ps support is still
experimental.
[FIX]
We need to either allow insert_inline_extent() to accept a page array to
properly support such case, or reject such inline extent.
The latter is a much simpler solution, and considering bs > ps will stay
as a corner case and non-default max_inline will be even rarer, I don't
think we really need to fulfill such niche.
So just reject any inline extent that's larger than PAGE_SIZE, and add
an extra ASSERT() to insert_inline_extent() to catch such beyond-boundary
access.
Fixes: ec20799064c8 ("btrfs: enable encoded read/write/send for bs > ps cases")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Michal Luczaj says:
====================
vsock: Fix SO_ZEROCOPY on accept()ed vsocks
vsock has its own handling of setsockopt(SO_ZEROCOPY). Which works just
fine unless socket comes from a call to accept(). Because
SOCK_CUSTOM_SOCKOPT flag is missing, attempting to set the option always
results in errno EOPNOTSUPP.
====================
Link: https://patch.msgid.link/20251229-vsock-child-sock-custom-sockopt-v2-0-64778d6c4f88@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SO_ZEROCOPY handling in vsock_connectible_setsockopt() does not get called
on accept()ed sockets due to a missing flag. Flip it.
Fixes: e0718bd82e27 ("vsock: enable setting SO_ZEROCOPY")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20251229-vsock-child-sock-custom-sockopt-v2-1-64778d6c4f88@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently calc_target() clears t->paused if the request shouldn't be
paused anymore, but doesn't ever set t->paused even though it's able to
determine when the request should be paused. Setting t->paused is left
to __submit_request() which is fine for regular requests but doesn't
work for linger requests -- since __submit_request() doesn't operate
on linger requests, there is nowhere for lreq->t.paused to be set.
One consequence of this is that watches don't get reestablished on
paused -> unpaused transitions in cases where requests have been paused
long enough for the (paused) unwatch request to time out and for the
subsequent (re)watch request to enter the paused state. On top of the
watch not getting reestablished, rbd_reregister_watch() gets stuck with
rbd_dev->watch_mutex held:
rbd_register_watch
__rbd_register_watch
ceph_osdc_watch
linger_reg_commit_wait
It's waiting for lreq->reg_commit_wait to be completed, but for that to
happen the respective request needs to end up on need_resend_linger list
and be kicked when requests are unpaused. There is no chance for that
if the request in question is never marked paused in the first place.
The fact that rbd_dev->watch_mutex remains taken out forever then
prevents the image from getting unmapped -- "rbd unmap" would inevitably
hang in D state on an attempt to grab the mutex.
Cc: stable@vger.kernel.org
Reported-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
The only use of this helper is to iterate all of the workers, and
hence all callers will pass in a func that always returns false to do
that. As none of the callers use the return value, get rid of it.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[Why]
Query for VPE block_type and ip_count is missing.
[How]
Add VPE case in ip_block_type and hw_ip_count query.
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a6ea0a430aca5932b9c75d8e38deeb45665dd2ae)
Cc: stable@vger.kernel.org
