mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-01-17 12:00:35 +00:00
11842 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Paolo Bonzini
|
4361f5aa8b |
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
-----BEGIN PGP SIGNATURE-----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=lBtj
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.18-rc2' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
|
||
|
Linus Torvalds
|
fbde105f13 |
bpf-fixes
-----BEGIN PGP SIGNATURE-----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=77JH
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Finish constification of 1st parameter of bpf_d_path() (Rong Tao)
- Harden userspace-supplied xdp_desc validation (Alexander Lobakin)
- Fix metadata_dst leak in __bpf_redirect_neigh_v{4,6}() (Daniel
Borkmann)
- Fix undefined behavior in {get,put}_unaligned_be32() (Eric Biggers)
- Use correct context to unpin bpf hash map with special types (KaFai
Wan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add test for unpinning htab with internal timer struct
bpf: Avoid RCU context warning when unpinning htab with internal structs
xsk: Harden userspace-supplied xdp_desc validation
bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6}
libbpf: Fix undefined behavior in {get,put}_unaligned_be32()
bpf: Finish constification of 1st parameter of bpf_d_path()
|
||
|
Sean Christopherson
|
fe2bf6234e |
KVM: guest_memfd: Add INIT_SHARED flag, reject user page faults if not set
Add a guest_memfd flag to allow userspace to state that the underlying
memory should be configured to be initialized as shared, and reject user
page faults if the guest_memfd instance's memory isn't shared. Because
KVM doesn't yet support in-place private<=>shared conversions, all
guest_memfd memory effectively follows the initial state.
Alternatively, KVM could deduce the initial state based on MMAP, which for
all intents and purposes is what KVM currently does. However, implicitly
deriving the default state based on MMAP will result in a messy ABI when
support for in-place conversions is added.
For x86 CoCo VMs, which don't yet support MMAP, memory is currently private
by default (otherwise the memory would be unusable). If MMAP implies
memory is shared by default, then the default state for CoCo VMs will vary
based on MMAP, and from userspace's perspective, will change when in-place
conversion support is added. I.e. to maintain guest<=>host ABI, userspace
would need to immediately convert all memory from shared=>private, which
is both ugly and inefficient. The inefficiency could be avoided by adding
a flag to state that memory is _private_ by default, irrespective of MMAP,
but that would lead to an equally messy and hard to document ABI.
Bite the bullet and immediately add a flag to control the default state so
that the effective behavior is explicit and straightforward.
Fixes: 3d3a04fad25a ("KVM: Allow and advertise support for host mmap() on guest_memfd files")
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
||
|
Sean Christopherson
|
d2042d8f96 |
KVM: Rework KVM_CAP_GUEST_MEMFD_MMAP into KVM_CAP_GUEST_MEMFD_FLAGS
Rework the not-yet-released KVM_CAP_GUEST_MEMFD_MMAP into a more generic KVM_CAP_GUEST_MEMFD_FLAGS capability so that adding new flags doesn't require a new capability, and so that developers aren't tempted to bundle multiple flags into a single capability. Note, kvm_vm_ioctl_check_extension_generic() can only return a 32-bit value, but that limitation can be easily circumvented by adding e.g. KVM_CAP_GUEST_MEMFD_FLAGS2 in the unlikely event guest_memfd supports more than 32 flags. Reviewed-by: Ackerley Tng <ackerleytng@google.com> Tested-by: Ackerley Tng <ackerleytng@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20251003232606.4070510-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Linus Torvalds
|
284fc30e66 |
drm next fixes for 6.18-rc1
amdgpu:
- DC DCE6 fixes
- GPU reset fixes
- Secure diplay messaging cleanup
- MES fix
- GPUVM locking fixes
- PMFW messaging cleanup
- PCI US/DS switch handling fix
- VCN queue reset fix
- DC FPU handling fix
- DCN 3.5 fix
- DC mirroring fix
amdkfd:
- Fix kfd process ref leak
- mmap write lock handling fix
- Fix comments in IOCTL
xe:
- Fix build with clang 16
- Fix handling of invalid configfs syntax usage and spell out the
expected syntax in the documentation
- Do not try late bind firmware when running as VF since it
shouldn't handle firmware loading
- Fix idle assertion for local BOs
- Fix uninitialized variable for late binding
- Do not require perfmon_capable to expose free memory at page
granularity. Handle it like other drm drivers do
- Fix lock handling on suspend error path
- Fix I2C controller resume after S3
v3d:
- fix fence locking
-----BEGIN PGP SIGNATURE-----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=tSAX
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-10-11-1' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm fixes from Dave Airlie:
"Just the follow up fixes for rc1 from the next branch, amdgpu and xe
mostly with a single v3d fix in there.
amdgpu:
- DC DCE6 fixes
- GPU reset fixes
- Secure diplay messaging cleanup
- MES fix
- GPUVM locking fixes
- PMFW messaging cleanup
- PCI US/DS switch handling fix
- VCN queue reset fix
- DC FPU handling fix
- DCN 3.5 fix
- DC mirroring fix
amdkfd:
- Fix kfd process ref leak
- mmap write lock handling fix
- Fix comments in IOCTL
xe:
- Fix build with clang 16
- Fix handling of invalid configfs syntax usage and spell out the
expected syntax in the documentation
- Do not try late bind firmware when running as VF since it shouldn't
handle firmware loading
- Fix idle assertion for local BOs
- Fix uninitialized variable for late binding
- Do not require perfmon_capable to expose free memory at page
granularity. Handle it like other drm drivers do
- Fix lock handling on suspend error path
- Fix I2C controller resume after S3
v3d:
- fix fence locking"
* tag 'drm-next-2025-10-11-1' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
drm/amd/display: Incorrect Mirror Cositing
drm/amd/display: Enable Dynamic DTBCLK Switch
drm/amdgpu: Report individual reset error
drm/amdgpu: partially revert "revert to old status lock handling v3"
drm/amd/display: Fix unsafe uses of kernel mode FPU
drm/amd/pm: Disable VCN queue reset on SMU v13.0.6 due to regression
drm/amdgpu: Fix general protection fault in amdgpu_vm_bo_reset_state_machine
drm/amdgpu: Check swus/ds for switch state save
drm/amdkfd: Fix two comments in kfd_ioctl.h
drm/amd/pm: Avoid interface mismatch messaging
drm/amdgpu: Merge amdgpu_vm_set_pasid into amdgpu_vm_init
drm/amd/amdgpu: Fix the mes version that support inv_tlbs
drm/amd: Check whether secure display TA loaded successfully
drm/amdkfd: Fix mmap write lock not release
drm/amdkfd: Fix kfd process ref leaking when userptr unmapping
drm/amdgpu: Fix for GPU reset being blocked by KIQ I/O.
drm/amd/display: Disable scaling on DCE6 for now
drm/amd/display: Properly disable scaling on DCE6
drm/amd/display: Properly clear SCL_*_FILTER_CONTROL on DCE6
drm/amd/display: Add missing DCE6 SCL_HORZ_FILTER_INIT* SRIs
...
|
||
|
Linus Torvalds
|
eba41c0173 |
io_uring-6.18-20251009
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmjoDjwQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpsU+EADBSwfdXgI9tY+Ldmoruf4nfySot6r7z7Em 2VZ2+LCdGP/U8unMngpoI9ZGWQqWqSYnRNL+5RnYJR0dJTFYWd6ME+lXTgJNYfiX OR759rN3yC2NmfPL9U9L6CT+huGtk5zdnVNIx2aYxA7TxzbiIVfWB5ZuqigptSyg Hj+5yS9b8CqrnuZCavOvijB6/oL/ICtKz0Fn8X1Z0meJpQQT79exKwGclADWiVfF t+nshXv1N8jC40z2FpjGacmDOfVlyW+CiPfhRnj8KXFXAlP0WQiNjJYUKj1IC7Do eq6Wt2WJPSE74/t61h4RlECwWgNxXPykeYPnrpyduCjmgk2FsmqaFvtVWiJDaUGZ AByj/GMlRyW0FFoVtUi6Ne1NFWajCocE8yB8/GMn5neqZwgosu0R7bMEewdMoUVw IVY3J4ZoKgd+IFuBARahc9lLLXMLTGe1pzD/Let/Y6eioU9gfdokn990LQMaSp5L 9DncBseYRjonI5GzXKkDn/Q5RRe0+Ifmec9cvz+JcI68NJWVxsHFLDtXpqhkxuFW Fs/BMlYUrPo4snKYdW0sulD2tfEC9CD3epe6O/7Lb68SbGlvKZSwLEzTeriy5N07 bsBFmKKLNGhbWNGpBJjMjncHgCPf9oiND3rpzp7XuCa3hdcq0nI7yVCp1VlIBLRj ePg/3KsU9A== =p4O+ -----END PGP SIGNATURE----- Merge tag 'io_uring-6.18-20251009' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux Pull io_uring fixes from Jens Axboe: - Fixup indentation in the UAPI header - Two fixes for zcrx. One fixes receiving too much in some cases, and the other deals with not correctly incrementing the source in the fallback copy loop - Fix for a race in the IORING_OP_WAITID command, where there was a small window where the request would be left on the wait_queue_head list even though it was being canceled/completed - Update liburing git URL in the kernel tree * tag 'io_uring-6.18-20251009' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: io_uring/zcrx: increment fallback loop src offset io_uring/zcrx: fix overshooting recv limit io_uring: use tab indentation for IORING_SEND_VECTORIZED comment io_uring/waitid: always prune wait queue entry in io_waitid_wait() io_uring: update liburing git URL |
||
|
Felix Kuehling
|
1f086d2508 |
drm/amdkfd: Fix two comments in kfd_ioctl.h
Queue read and write pointers are "to KFD", not "from KFD". Suggested-by: Robert Liu <robert.liu@amd.com> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Robert Liu <robert.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
Haiyue Wang
|
beb97995b9 |
io_uring: use tab indentation for IORING_SEND_VECTORIZED comment
Be consistent with tab style of "liburing/src/include/liburing/io_uring.h". Signed-off-by: Haiyue Wang <haiyuewa@163.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
2f2c725493 |
pci-v6.18-changes
-----BEGIN PGP SIGNATURE-----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=BUw/
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
||
|
Linus Torvalds
|
6093a688a0 |
Char/Misc/IIO/Binder changes for 6.18-rc1
Here is the big set of char/misc/iio and other driver subsystem changes
for 6.18-rc1. Loads of different stuff in here, it was a busy
development cycle in lots of different subsystems, with over 27k new
lines added to the tree. Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor
updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust. This is the big one, and
was driving a huge majority of the rust binding work over the past
years. Right now there are 2 binder drivers in the kernel, selected
only at build time as to which one to use as binder wants to be
included in the system at boot time. The binder C maintainers all
agreed on this, as eventually, they want the C code to be removed from
the tree, but it will take a few releases to get there while both
are maintained to ensure that the rust implementation is fully
stable and compliant with the existing userspace apis.
All of these have been in linux-next for a while, with only minor merge
issues showing up (you will hit them as well.) Just accept both sides
of the merge, it's just some header and include file lines, nothing
major.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaOEffA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynI/wCgjLFWH9B+huZI5JQb06NShggZod4AnjFFJ4ID
macHNv5/SjpAh7H5ssBU
=cjWS
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
||
|
Linus Torvalds
|
54ba6d9b13 |
hid-for-linus-2025093001
-----BEGIN PGP SIGNATURE-----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=8Nwa
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- haptic touchpad support (Angela Czubak and Jonathan Denose)
- support for audio jack handling on DualSense Playstation controllers
(Cristian Ciocaltea)
- allow HID-BPF to rebind a driver to hid-multitouch (Benjamin
Tissoires)
- rework hidraw ioctls to make them safer (and tested) (Benjamin
Tissoires)
- various PIDFF and universal-PIDFF fixes/improvements (Tomasz Pakuła)
- better configuration of Intel QuickI2C through ACPI (Xinpeng Sun)
- other assorted cleanups and fixes
* tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (58 commits)
HID: playstation: Switch to scoped_guard() in {dualsense|dualshock4}_output_worker()
HID: playstation: Silence sparse warnings for locking context imbalances
HID: playstation: Update SP preamp gain comment line
HID: intel-thc-hid: intel-quicki2c: support ACPI config for advanced features
HID: core: Change hid_driver to use a const char* for name
HID: hidraw: tighten ioctl command parsing
selftests/hid: hidraw: forge wrong ioctls and tests them
selftests/hid: hidraw: add more coverage for hidraw ioctls
selftests/hid: update vmtest.sh for virtme-ng
HID: playstation: Support DualSense audio jack event reporting
HID: playstation: Support DualSense audio jack hotplug detection
HID: playstation: Redefine DualSense input report status field
HID: playstation: Prefer kzalloc(sizeof(*buf)...)
HID: playstation: Document spinlock_t usage
HID: playstation: Fix all alignment and line length issues
HID: playstation: Correct spelling in comment sections
HID: playstation: Replace uint{32,16,8}_t with u{32,16,8}
HID: playstation: Simplify locking with guard() and scoped_guard()
HID: playstation: Add spaces around arithmetic operators
HID: playstation: Make use of bitfield macros
...
|
||
|
Linus Torvalds
|
908057d185 |
This update includes the following changes:
Drivers: - Add ciphertext hiding support to ccp. - Add hashjoin, gather and UDMA data move features to hisilicon. - Add lz4 and lz77_only to hisilicon. - Add xilinx hwrng driver. - Add ti driver with ecb/cbc aes support. - Add ring buffer idle and command queue telemetry for GEN6 in qat. Others: - Use rcu_dereference_all to stop false alarms in rhashtable. - Fix CPU number wraparound in padata. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmjbpJsACgkQxycdCkmx i6fuTRAAzv5o0MIw4Kc7EEU3zMgFSX0FdcTUPY+eiFrWZrSrvUVW+jYcH9ppO8J7 offAYSZYatcyyU9+u8X22CQNKLdXnKQQ0YymWO35TOpvVxveUM1bqEEV1ZK0xaXD hlJTLoFIsPaVVhi8CW+ZNhDJBwJHNCv7Yi9TUB6sC7rilWWbJ5LzbEVw3Rtg81Lx 0hcuGX2LrpsHOVVWYxGdJ534Kt2lrkt+8/gWOFg3ap3RVQ39tohEjS2Adm2p8eiX zIdru/aYd89EcYoxuFyylX2d/OLmMAQpFsADy/Fys26eeOWtqggH62V1LAiSyEqw vLRBCVKpLhlbNNfnUs0f5nqjjYEUrNk9SA4rgoxITwKoucbWBQMS4zWJTEDKz29n iBBqHsukGpwVOE6RY8BzR/QNJKhZCSsJpGkagS1v6VPa5P1QomuKftGXKB7JKXKz xoyk+DhJyA8rkb/E5J9Ni7+Tb08Y4zvJ1dpCQHZMlln3DKkK+kk3gkpoxXMZwBV2 LbEMGTI+sfnAfqkGCJYAZR9gDJ5LQDR9jy/Ds5jvPuVvvjyY5LY/bjETqGPF2QVs Rz2Sg0RHl7PVZOP6QgbQzkV7SkJrZfyu5iYd0ZfUqZr7BaHLOHJG/E/HlUW3/mXu OjD+Q5gPhiOdc/qn+32+QERTDCFQdbByv0h7khGQA5vHE3XCu8E= =knnk -----END PGP SIGNATURE----- Merge tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Drivers: - Add ciphertext hiding support to ccp - Add hashjoin, gather and UDMA data move features to hisilicon - Add lz4 and lz77_only to hisilicon - Add xilinx hwrng driver - Add ti driver with ecb/cbc aes support - Add ring buffer idle and command queue telemetry for GEN6 in qat Others: - Use rcu_dereference_all to stop false alarms in rhashtable - Fix CPU number wraparound in padata" * tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits) dt-bindings: rng: hisi-rng: convert to DT schema crypto: doc - Add explicit title heading to API docs hwrng: ks-sa - fix division by zero in ks_sa_rng_init KEYS: X.509: Fix Basic Constraints CA flag parsing crypto: anubis - simplify return statement in anubis_mod_init crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs crypto: hisilicon/qm - clear all VF configurations in the hardware crypto: hisilicon - enable error reporting again crypto: hisilicon/qm - mask axi error before memory init crypto: hisilicon/qm - invalidate queues in use crypto: qat - Return pointer directly in adf_ctl_alloc_resources crypto: aspeed - Fix dma_unmap_sg() direction rhashtable: Use rcu_dereference_all and rcu_dereference_all_check crypto: comp - Use same definition of context alloc and free ops crypto: omap - convert from tasklet to BH workqueue crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user() crypto: caam - double the entropy delay interval for retry padata: WQ_PERCPU added to alloc_workqueue users padata: replace use of system_unbound_wq with system_dfl_wq crypto: cryptd - WQ_PERCPU added to alloc_workqueue users ... |
||
|
Rong Tao
|
de7342228b |
bpf: Finish constification of 1st parameter of bpf_d_path()
The commit 1b8abbb12128 ("bpf...d_path(): constify path argument")
constified the first parameter of the bpf_d_path(), but failed to
update it in all places. Finish constification.
Otherwise the selftest fail to build:
.../selftests/bpf/bpf_experimental.h:222:12: error: conflicting types for 'bpf_path_d_path'
222 | extern int bpf_path_d_path(const struct path *path, char *buf, size_t buf__sz) __ksym;
| ^
.../selftests/bpf/tools/include/vmlinux.h:153922:12: note: previous declaration is here
153922 | extern int bpf_path_d_path(struct path *path, char *buf, size_t buf__sz) __weak __ksym;
Fixes: 1b8abbb12128 ("bpf...d_path(): constify path argument")
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Linus Torvalds
|
f3826aa996 |
guest_memfd:
* Add support for host userspace mapping of guest_memfd-backed memory for VM
types that do NOT use support KVM_MEMORY_ATTRIBUTE_PRIVATE (which isn't
precisely the same thing as CoCo VMs, since x86's SEV-MEM and SEV-ES have
no way to detect private vs. shared).
This lays the groundwork for removal of guest memory from the kernel direct
map, as well as for limited mmap() for guest_memfd-backed memory.
For more information see:
* a6ad54137af9 ("Merge branch 'guest-memfd-mmap' into HEAD", 2025-08-27)
* https://github.com/firecracker-microvm/firecracker/tree/feature/secret-hiding
(guest_memfd in Firecracker)
* https://lore.kernel.org/all/20250221160728.1584559-1-roypat@amazon.co.uk/
(direct map removal)
* https://lore.kernel.org/all/20250328153133.3504118-1-tabba@google.com/
(mmap support)
ARM:
* Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
* Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
* Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
* Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This will
hopefully help debugging non-VHE setups.
* Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
* Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
* Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
* Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then allows
a bunch of features to be turned off, which helps cross-host
migration.
* Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
* Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
LoongArch:
* Detect page table walk feature on new hardware
* Add sign extension with kernel MMIO/IOCSR emulation
* Improve in-kernel IPI emulation
* Improve in-kernel PCH-PIC emulation
* Move kvm_iocsr tracepoint out of generic code
RISC-V:
* Added SBI FWFT extension for Guest/VM with misaligned delegation and
pointer masking PMLEN features
* Added ONE_REG interface for SBI FWFT extension
* Added Zicbop and bfloat16 extensions for Guest/VM
* Enabled more common KVM selftests for RISC-V
* Added SBI v3.0 PMU enhancements in KVM and perf driver
s390:
* Improve interrupt cpu for wakeup, in particular the heuristic to decide
which vCPU to deliver a floating interrupt to.
* Clear the PTE when discarding a swapped page because of CMMA; this
bug was introduced in 6.16 when refactoring gmap code.
x86 selftests:
* Add #DE coverage in the fastops test (the only exception that's guest-
triggerable in fastop-emulated instructions).
* Fix PMU selftests errors encountered on Granite Rapids (GNR), Sierra
Forest (SRF) and Clearwater Forest (CWF).
* Minor cleanups and improvements
x86 (guest side):
* For the legacy PCI hole (memory between TOLUD and 4GiB) to UC when
overriding guest MTRR for TDX/SNP to fix an issue where ACPI auto-mapping
could map devices as WB and prevent the device drivers from mapping their
devices with UC/UC-.
* Make kvm_async_pf_task_wake() a local static helper and remove its
export.
* Use native qspinlocks when running in a VM with dedicated vCPU=>pCPU
bindings even when PV_UNHALT is unsupported.
Generic:
* Remove a redundant __GFP_NOWARN from kvm_setup_async_pf() as __GFP_NOWARN is
now included in GFP_NOWAIT.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmjcGSkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPSPAgAnJDswU4fZ5YdJr6jGzsbSQ6utlIV
FeEltLKQIM7Aq/uvL6PLN5Kx1Pb/d9r9ag39mDT6lq9fOfJdOLjJr2SBXPTCsrPS
6hyNL1mlgo5qzs54T8dkMbQThlSgA4zaehsc0zl8vnwil6ygoAdrtTHqZm6V0hu/
F/sVlikCsLix1hC0KtzwscyWYcjWtXfVoi9eU5WY6ALpQaVXfRUtwyOhGDkldr+m
i3iDiGiLAZ5Iu3igUCIOEzSSQY0FgLJpzbwJAeUxIvomDkHGJLaR14ijvM+NkRZi
FBo2CLbjrwXb56Rbh2ABcq0CGJ3EiU3L+CC34UaRLzbtl/2BtpetkC3irA==
=fyov
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This excludes the bulk of the x86 changes, which I will send
separately. They have two not complex but relatively unusual conflicts
so I will wait for other dust to settle.
guest_memfd:
- Add support for host userspace mapping of guest_memfd-backed memory
for VM types that do NOT use support KVM_MEMORY_ATTRIBUTE_PRIVATE
(which isn't precisely the same thing as CoCo VMs, since x86's
SEV-MEM and SEV-ES have no way to detect private vs. shared).
This lays the groundwork for removal of guest memory from the
kernel direct map, as well as for limited mmap() for
guest_memfd-backed memory.
For more information see:
- commit a6ad54137af9 ("Merge branch 'guest-memfd-mmap' into HEAD")
- guest_memfd in Firecracker:
https://github.com/firecracker-microvm/firecracker/tree/feature/secret-hiding
- direct map removal:
https://lore.kernel.org/all/20250221160728.1584559-1-roypat@amazon.co.uk/
- mmap support:
https://lore.kernel.org/all/20250328153133.3504118-1-tabba@google.com/
ARM:
- Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
- Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
- Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
- Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This
will hopefully help debugging non-VHE setups.
- Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
- Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
- Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
- Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then
allows a bunch of features to be turned off, which helps cross-host
migration.
- Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
- Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
LoongArch:
- Detect page table walk feature on new hardware
- Add sign extension with kernel MMIO/IOCSR emulation
- Improve in-kernel IPI emulation
- Improve in-kernel PCH-PIC emulation
- Move kvm_iocsr tracepoint out of generic code
RISC-V:
- Added SBI FWFT extension for Guest/VM with misaligned delegation
and pointer masking PMLEN features
- Added ONE_REG interface for SBI FWFT extension
- Added Zicbop and bfloat16 extensions for Guest/VM
- Enabled more common KVM selftests for RISC-V
- Added SBI v3.0 PMU enhancements in KVM and perf driver
s390:
- Improve interrupt cpu for wakeup, in particular the heuristic to
decide which vCPU to deliver a floating interrupt to.
- Clear the PTE when discarding a swapped page because of CMMA; this
bug was introduced in 6.16 when refactoring gmap code.
x86 selftests:
- Add #DE coverage in the fastops test (the only exception that's
guest- triggerable in fastop-emulated instructions).
- Fix PMU selftests errors encountered on Granite Rapids (GNR),
Sierra Forest (SRF) and Clearwater Forest (CWF).
- Minor cleanups and improvements
x86 (guest side):
- For the legacy PCI hole (memory between TOLUD and 4GiB) to UC when
overriding guest MTRR for TDX/SNP to fix an issue where ACPI
auto-mapping could map devices as WB and prevent the device drivers
from mapping their devices with UC/UC-.
- Make kvm_async_pf_task_wake() a local static helper and remove its
export.
- Use native qspinlocks when running in a VM with dedicated
vCPU=>pCPU bindings even when PV_UNHALT is unsupported.
Generic:
- Remove a redundant __GFP_NOWARN from kvm_setup_async_pf() as
__GFP_NOWARN is now included in GFP_NOWAIT.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (178 commits)
KVM: s390: Fix to clear PTE when discarding a swapped page
KVM: arm64: selftests: Cover ID_AA64ISAR3_EL1 in set_id_regs
KVM: arm64: selftests: Remove a duplicate register listing in set_id_regs
KVM: arm64: selftests: Cope with arch silliness in EL2 selftest
KVM: arm64: selftests: Add basic test for running in VHE EL2
KVM: arm64: selftests: Enable EL2 by default
KVM: arm64: selftests: Initialize HCR_EL2
KVM: arm64: selftests: Use the vCPU attr for setting nr of PMU counters
KVM: arm64: selftests: Use hyp timer IRQs when test runs at EL2
KVM: arm64: selftests: Select SMCCC conduit based on current EL
KVM: arm64: selftests: Provide helper for getting default vCPU target
KVM: arm64: selftests: Alias EL1 registers to EL2 counterparts
KVM: arm64: selftests: Create a VGICv3 for 'default' VMs
KVM: arm64: selftests: Add unsanitised helpers for VGICv3 creation
KVM: arm64: selftests: Add helper to check for VGICv3 support
KVM: arm64: selftests: Initialize VGICv3 only once
KVM: arm64: selftests: Provide kvm_arch_vm_post_create() in library code
KVM: selftests: Add ex_str() to print human friendly name of exception vectors
selftests/kvm: remove stale TODO in xapic_state_test
KVM: selftests: Handle Intel Atom errata that leads to PMU event overcount
...
|
||
|
Linus Torvalds
|
65989db7f8 |
New ext4 features:
* Add support so tune2fs can modify/update the superblock using an
ioctl, without needing write access to the block device.
* Add support for 32-bit reserved uid's and gid's.
Bug fixes:
* Fix potential warnings and other failures caused by corrupted / fuzzed
file systems.
* Fail unaligned direct I/O write with EINVAL instead of silently
falling back to buffered I/O
* Correectly handle fsmap queries for metadata mappings
* Avoid journal stalls caused by writeback throttling
* Add some missing GFP_NOFAIL flags to avoid potential deadlocks
under extremem memory pressure
Cleanups:
* Remove obsolete EXT3 Kconfigs
-----BEGIN PGP SIGNATURE-----
iQEyBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmjclvEACgkQ8vlZVpUN
gaPjJgf4vnWF6DdV/eQfD9d41h+cOuBv0w/pLBMP5nsJn1NtI057hnIEs4DyWqIn
M5O6qT4ktgoeS2zsKDnhdXWLjpnWJfqWKnYR76CoaZjNzg/2A3aT5+/H5fFRpBcT
gkoh1xJbcdo5rglktAyAqYGIUAgRIimNPaLyeffMqHAOdhaiBpzIVU0D4Z24kGUg
nBEMhQ6Km8Bvp1mJUiT9EsFXdC9BakUVrXLiliJsCBWitEYpBk/nScs7U/QQ4KVU
IvK7jiacYapLHwRm/7d9rlr2VQw1rWa584B4seq7H+FWNNAuQcV5Bml05bbUeKGc
9KKZDPA55UqcMBDkcHwro2GkYIFc
=8Z1N
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"New ext4 features:
- Add support so tune2fs can modify/update the superblock using an
ioctl, without needing write access to the block device
- Add support for 32-bit reserved uid's and gid's
Bug fixes:
- Fix potential warnings and other failures caused by corrupted /
fuzzed file systems
- Fail unaligned direct I/O write with EINVAL instead of silently
falling back to buffered I/O
- Correectly handle fsmap queries for metadata mappings
- Avoid journal stalls caused by writeback throttling
- Add some missing GFP_NOFAIL flags to avoid potential deadlocks
under extremem memory pressure
Cleanups:
- Remove obsolete EXT3 Kconfigs"
* tag 'ext4_for_linus-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix checks for orphan inodes
ext4: validate ea_ino and size in check_xattrs
ext4: guard against EA inode refcount underflow in xattr update
ext4: implemet new ioctls to set and get superblock parameters
ext4: add support for 32-bit default reserved uid and gid values
ext4: avoid potential buffer over-read in parse_apply_sb_mount_options()
ext4: fix an off-by-one issue during moving extents
ext4: increase i_disksize to offset + len in ext4_update_disksize_before_punch()
ext4: verify orphan file size is not too big
ext4: fail unaligned direct IO write with EINVAL
ext4: correctly handle queries for metadata mappings
ext4: increase IO priority of fastcommit
ext4: remove obsolete EXT3 config options
jbd2: increase IO priority of checkpoint
ext4: fix potential null deref in ext4_mb_init()
ext4: add ext4_sb_bread_nofail() helper function for ext4_free_branches()
ext4: replace min/max nesting with clamp()
fs: ext4: change GFP_KERNEL to GFP_NOFS to avoid deadlock
|
||
|
Linus Torvalds
|
6238729bfc |
fuse update for 6.18
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCaNuYpQAKCRDh3BK/laaZ PBF6APoDWzheST2Gw3LPkU03xF6Yn+ZMP0p3L676yYBb07LrWQD8CBsfOkMei6W/ L+/GaVAbpIsuCQ6GTPE/6HTLWevU2Q0= =kR5v -----END PGP SIGNATURE----- Merge tag 'fuse-update-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: - Extend copy_file_range interface to be fully 64bit capable (Miklos) - Add selftest for fusectl (Chen Linxuan) - Move fuse docs into a separate directory (Bagas Sanjaya) - Allow fuse to enter freezable state in some cases (Sergey Senozhatsky) - Clean up writeback accounting after removing tmp page copies (Joanne) - Optimize virtiofs request handling (Li RongQing) - Add synchronous FUSE_INIT support (Miklos) - Allow server to request prune of unused inodes (Miklos) - Fix deadlock with AIO/sync release (Darrick) - Add some prep patches for block/iomap support (Darrick) - Misc fixes and cleanups * tag 'fuse-update-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (26 commits) fuse: move CREATE_TRACE_POINTS to a separate file fuse: move the backing file idr and code into a new source file fuse: enable FUSE_SYNCFS for all fuseblk servers fuse: capture the unique id of fuse commands being sent fuse: fix livelock in synchronous file put from fuseblk workers mm: fix lockdep issues in writeback handling fuse: add prune notification fuse: remove redundant calls to fuse_copy_finish() in fuse_notify() fuse: fix possibly missing fuse_copy_finish() call in fuse_notify() fuse: remove FUSE_NOTIFY_CODE_MAX from <uapi/linux/fuse.h> fuse: remove fuse_readpages_end() null mapping check fuse: fix references to fuse.rst -> fuse/fuse.rst fuse: allow synchronous FUSE_INIT fuse: zero initialize inode private data fuse: remove unused 'inode' parameter in fuse_passthrough_open virtio_fs: fix the hash table using in virtio_fs_enqueue_req() mm: remove BDI_CAP_WRITEBACK_ACCT fuse: use default writeback accounting virtio_fs: Remove redundant spinlock in virtio_fs_request_complete() fuse: remove unneeded offset assignment when filling write pages ... |
||
|
Bjorn Helgaas
|
fef3530379 |
Merge branch 'pci/capability-search'
- Simplify __pci_find_next_cap_ttl() by replacing magic numbers with #defines, extracting fields with FIELD_GET(), etc (Hans Zhang) - Convert __pci_find_next_cap_ttl() to a PCI_FIND_NEXT_CAP() macro that takes a config space accessor function so we can also use it in cases where the usual config accessors aren't available (Hans Zhang) - Similarly convert pci_find_next_ext_capability() to a PCI_FIND_NEXT_EXT_CAP() macro (Hans Zhang) - Implement dwc, dwc endpoint, and cadence capability search interfaces on top of PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP(), replacing the previous duplicated code (Hans Zhang) - Search for capabilities in the cadence core instead of hard-coding their offsets, which are subject to change (Hans Zhang) * pci/capability-search: PCI: cadence: Use cdns_pcie_find_*capability() to avoid hardcoding offsets PCI: cadence: Implement capability search using PCI core APIs PCI: dwc: ep: Implement capability search using PCI core APIs PCI: dwc: Implement capability search using PCI core APIs PCI: Refactor extended capability search into PCI_FIND_NEXT_EXT_CAP() PCI: Refactor capability search into PCI_FIND_NEXT_CAP() PCI: Clean up __pci_find_next_cap_ttl() readability |
||
|
Linus Torvalds
|
e406d57be7 |
Patch series in this pull request:
- The 3 patch series "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet completes the removal of this legacy IDR API. - The 9 patch series "panic: introduce panic status function family" from Jinchao Wang provides a number of cleanups to the panic code and its various helpers, which were rather ad-hoc and scattered all over the place. - The 5 patch series "tools/delaytop: implement real-time keyboard interaction support" from Fan Yu adds a few nice user-facing usability changes to the delaytop monitoring tool. - The 3 patch series "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos Petrongonas fixes a panic which was happening with the combination of EFI and KHO. - The 2 patch series "Squashfs: performance improvement and a sanity check" from Phillip Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere 150x speedup was measured for a well-chosen microbenchmark. - Plus another 50-odd singleton patches all over the place. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN78zwAKCRDdBJ7gKXxA jhLeAQCddTv0XtSUTrvBvmrJVUBrQQeJc+LtNopMIjfAF/WAWAEAogSVKxg+HHEB GaVixx4zDriNzEqrqiCx9rm4l+YooQA= =XRe0 -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet completes the removal of this legacy IDR API - "panic: introduce panic status function family" from Jinchao Wang provides a number of cleanups to the panic code and its various helpers, which were rather ad-hoc and scattered all over the place - "tools/delaytop: implement real-time keyboard interaction support" from Fan Yu adds a few nice user-facing usability changes to the delaytop monitoring tool - "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos Petrongonas fixes a panic which was happening with the combination of EFI and KHO - "Squashfs: performance improvement and a sanity check" from Phillip Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere 150x speedup was measured for a well-chosen microbenchmark - plus another 50-odd singleton patches all over the place * tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (75 commits) Squashfs: reject negative file sizes in squashfs_read_inode() kallsyms: use kmalloc_array() instead of kmalloc() MAINTAINERS: update Sibi Sankar's email address Squashfs: add SEEK_DATA/SEEK_HOLE support Squashfs: add additional inode sanity checking lib/genalloc: fix device leak in of_gen_pool_get() panic: remove CONFIG_PANIC_ON_OOPS_VALUE ocfs2: fix double free in user_cluster_connect() checkpatch: suppress strscpy warnings for userspace tools cramfs: fix incorrect physical page address calculation kernel: prevent prctl(PR_SET_PDEATHSIG) from racing with parent process exit Squashfs: fix uninit-value in squashfs_get_parent kho: only fill kimage if KHO is finalized ocfs2: avoid extra calls to strlen() after ocfs2_sprintf_system_inode_name() kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths sched/task.h: fix the wrong comment on task_lock() nesting with tasklist_lock coccinelle: platform_no_drv_owner: handle also built-in drivers coccinelle: of_table: handle SPI device ID tables lib/decompress: use designated initializers for struct compress_format efi: support booting with kexec handover (KHO) ... |
||
|
Linus Torvalds
|
8804d970fa |
Summary of significant series in this pull request:
- The 3 patch series "mm, swap: improve cluster scan strategy" from
Kairui Song improves performance and reduces the failure rate of swap
cluster allocation.
- The 4 patch series "support large align and nid in Rust allocators"
from Vitaly Wool permits Rust allocators to set NUMA node and large
alignment when perforning slub and vmalloc reallocs.
- The 2 patch series "mm/damon/vaddr: support stat-purpose DAMOS" from
Yueyang Pan extend DAMOS_STAT's handling of the DAMON operations sets
for virtual address spaces for ops-level DAMOS filters.
- The 3 patch series "execute PROCMAP_QUERY ioctl under per-vma lock"
from Suren Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps.
- The 2 patch series "mm/mincore: minor clean up for swap cache
checking" from Kairui Song performs some cleanup in the swap code.
- The 11 patch series "mm: vm_normal_page*() improvements" from David
Hildenbrand provides code cleanup in the pagemap code.
- The 5 patch series "add persistent huge zero folio support" from
Pankaj Raghav provides a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero.
- The 3 patch series "kho: fixes and cleanups" from Mike Rapoport adds a
few touchups to the recently added Kexec Handover feature.
- The 10 patch series "mm: make mm->flags a bitmap and 64-bit on all
arches" from Lorenzo Stoakes turns mm_struct.flags into a bitmap. To
end the constant struggle with space shortage on 32-bit conflicting with
64-bit's needs.
- The 2 patch series "mm/swapfile.c and swap.h cleanup" from Chris Li
cleans up some swap code.
- The 7 patch series "selftests/mm: Fix false positives and skip
unsupported tests" from Donet Tom fixes a few things in our selftests
code.
- The 7 patch series "prctl: extend PR_SET_THP_DISABLE to only provide
THPs when advised" from David Hildenbrand "allows individual processes
to opt-out of THP=always into THP=madvise, without affecting other
workloads on the system".
It's a long story - the [1/N] changelog spells out the considerations.
- The 11 patch series "Add and use memdesc_flags_t" from Matthew Wilcox
gets us started on the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc.
- The 3 patch series "Tiny optimization for large read operations" from
Chi Zhiling improves the efficiency of the pagecache read path.
- The 5 patch series "Better split_huge_page_test result check" from Zi
Yan improves our folio splitting selftest code.
- The 2 patch series "test that rmap behaves as expected" from Wei Yang
adds some rmap selftests.
- The 3 patch series "remove write_cache_pages()" from Christoph Hellwig
removes that function and converts its two remaining callers.
- The 2 patch series "selftests/mm: uffd-stress fixes" from Dev Jain
fixes some UFFD selftests issues.
- The 3 patch series "introduce kernel file mapped folios" from Boris
Burkov introduces the concept of "kernel file pages". Using these
permits btrfs to account its metadata pages to the root cgroup, rather
than to the cgroups of random inappropriate tasks.
- The 2 patch series "mm/pageblock: improve readability of some
pageblock handling" from Wei Yang provides some readability improvements
to the page allocator code.
- The 11 patch series "mm/damon: support ARM32 with LPAE" from SeongJae
Park teaches DAMON to understand arm32 highmem.
- The 4 patch series "tools: testing: Use existing atomic.h for
vma/maple tests" from Brendan Jackman performs some code cleanups and
deduplication under tools/testing/.
- The 2 patch series "maple_tree: Fix testing for 32bit compiles" from
Liam Howlett fixes a couple of 32-bit issues in
tools/testing/radix-tree.c.
- The 2 patch series "kasan: unify kasan_enabled() and remove
arch-specific implementations" from Sabyrzhan Tasbolatov moves KASAN
arch-specific initialization code into a common arch-neutral
implementation.
- The 3 patch series "mm: remove zpool" from Johannes Weiner removes
zspool - an indirection layer which now only redirects to a single thing
(zsmalloc).
- The 2 patch series "mm: task_stack: Stack handling cleanups" from
Pasha Tatashin makes a couple of cleanups in the fork code.
- The 37 patch series "mm: remove nth_page()" from David Hildenbrand
makes rather a lot of adjustments at various nth_page() callsites,
eventually permitting the removal of that undesirable helper function.
- The 2 patch series "introduce kasan.write_only option in hw-tags" from
Yeoreum Yun creates a KASAN read-only mode for ARM, using that
architecture's memory tagging feature. It is felt that a read-only mode
KASAN is suitable for use in production systems rather than debug-only.
- The 3 patch series "mm: hugetlb: cleanup hugetlb folio allocation"
from Kefeng Wang does some tidying in the hugetlb folio allocation code.
- The 12 patch series "mm: establish const-correctness for pointer
parameters" from Max Kellermann makes quite a number of the MM API
functions more accurate about the constness of their arguments. This
was getting in the way of subsystems (in this case CEPH) when they
attempt to improving their own const/non-const accuracy.
- The 7 patch series "Cleanup free_pages() misuse" from Vishal Moola
fixes a number of code sites which were confused over when to use
free_pages() vs __free_pages().
- The 3 patch series "Add Rust abstraction for Maple Trees" from Alice
Ryhl makes the mapletree code accessible to Rust. Required by nouveau
and by its forthcoming successor: the new Rust Nova driver.
- The 2 patch series "selftests/mm: split_huge_page_test:
split_pte_mapped_thp improvements" from David Hildenbrand adds a fix and
some cleanups to the thp selftesting code.
- The 14 patch series "mm, swap: introduce swap table as swap cache
(phase I)" from Chris Li and Kairui Song is the first step along the
path to implementing "swap tables" - a new approach to swap allocation
and state tracking which is expected to yield speed and space
improvements. This patchset itself yields a 5-20% performance benefit
in some situations.
- The 3 patch series "Some ptdesc cleanups" from Matthew Wilcox utilizes
the new memdesc layer to clean up the ptdesc code a little.
- The 3 patch series "Fix va_high_addr_switch.sh test failure" from
Chunyu Hu fixes some issues in our 5-level pagetable selftesting code.
- The 2 patch series "Minor fixes for memory allocation profiling" from
Suren Baghdasaryan addresses a couple of minor issues in relatively new
memory allocation profiling feature.
- The 3 patch series "Small cleanups" from Matthew Wilcox has a few
cleanups in preparation for more memdesc work.
- The 2 patch series "mm/damon: add addr_unit for DAMON_LRU_SORT and
DAMON_RECLAIM" from Quanmin Yan makes some changes to DAMON in
furtherance of supporting arm highmem.
- The 2 patch series "selftests/mm: Add -Wunreachable-code and fix
warnings" from Muhammad Anjum adds that compiler check to selftests code
and fixes the fallout, by removing dead code.
- The 10 patch series "Improvements to Victim Process Thawing and OOM
Reaper Traversal Order" from zhongjinji makes a number of improvements
in the OOM killer: mainly thawing a more appropriate group of victim
threads so they can release resources.
- The 5 patch series "mm/damon: misc fixups and improvements for 6.18"
from SeongJae Park is a bunch of small and unrelated fixups for DAMON.
- The 7 patch series "mm/damon: define and use DAMON initialization
check function" from SeongJae Park implement reliability and
maintainability improvements to a recently-added bug fix.
- The 2 patch series "mm/damon/stat: expose auto-tuned intervals and
non-idle ages" from SeongJae Park provides additional transparency to
userspace clients of the DAMON_STAT information.
- The 2 patch series "Expand scope of khugepaged anonymous collapse"
from Dev Jain removes some constraints on khubepaged's collapsing of
anon VMAs. It also increases the success rate of MADV_COLLAPSE against
an anon vma.
- The 2 patch series "mm: do not assume file == vma->vm_file in
compat_vma_mmap_prepare()" from Lorenzo Stoakes moves us further towards
removal of file_operations.mmap(). This patchset concentrates upon
clearing up the treatment of stacked filesystems.
- The 6 patch series "mm: Improve mlock tracking for large folios" from
Kiryl Shutsemau provides some fixes and improvements to mlock's tracking
of large folios. /proc/meminfo's "Mlocked" field became more accurate.
- The 2 patch series "mm/ksm: Fix incorrect accounting of KSM counters
during fork" from Donet Tom fixes several user-visible KSM stats
inaccuracies across forks and adds selftest code to verify these
counters.
- The 2 patch series "mm_slot: fix the usage of mm_slot_entry" from Wei
Yang addresses some potential but presently benign issues in KSM's
mm_slot handling.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN3cywAKCRDdBJ7gKXxA
jtaPAQDmIuIu7+XnVUK5V11hsQ/5QtsUeLHV3OsAn4yW5/3dEQD/UddRU08ePN+1
2VRB0EwkLAdfMWW7TfiNZ+yhuoiL/AA=
=4mhY
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
||
|
Linus Torvalds
|
07fdad3a93 |
Networking changes for 6.18.
Core & protocols
----------------
- Improve drop account scalability on NUMA hosts for RAW and UDP sockets
and the backlog, almost doubling the Pps capacity under DoS.
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance by
an additional 50%, even more under extreme conditions.
- Add support for PSP encryption of TCP connections; this mechanism has
some similarities with IPsec and TLS, but offers superior HW offloads
capabilities.
- Ongoing work to support Accurate ECN for TCP. AccECN allows more than
one congestion notification signal per RTT and is a building block for
Low Latency, Low Loss, and Scalable Throughput (L4S).
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath.
- Refactor skb deferral free to better scale on large multi-NUMA hosts,
this improves TCP and UDP RX performances significantly on such HW.
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds.
- Improve handling of setups with a large number of nexthop, making dump
operating scaling linearly and avoiding unneeded synchronize_rcu() on
delete.
- Improve bridge handling of VLAN FDB, storing a single entry per bridge
instead of one entry per port; this makes the dump order of magnitude
faster on large switches.
- Restore IP ID correctly for encapsulated packets at GSO segmentation
time, allowing GRO to merge packets in more scenarios.
- Improve netfilter matching performance on large sets.
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting recent
TCP autotuning changes.
- Allow bridges to redirect to a backup port when the bridge port is
administratively down.
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups.
- Add RCU safety to dst->dev, closing a lot of possible races.
- A significant crypto library API for SCTP, MPTCP and IPv6 SR, reducing
code duplication.
- Supports pulling data from an skb frag into the linear area of an XDP
buffer.
Things we sprinkled into general kernel code
--------------------------------------------
- Generate netlink documentation from YAML using an integrated
YAML parser.
Driver API
----------
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection.
- Introduce API for fetching the DMA device for a given queue, allowing
TCP zerocopy RX on more H/W setups.
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath.
- Add a new dedicated ethtool callback enabling drivers to provide the
number of RX rings directly, improving efficiency and clarity in RX
ring queries and RSS configuration.
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause.
- Support for DPLL phase offset exponential moving average, controlling
the average smoothing factor.
Device drivers
--------------
- Add a new Huawei driver for 3rd gen NIC (hinic3).
- Add a new SpacemiT driver for K1 ethernet MAC.
- Add a generic abstraction for shared memory communication devices
(dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages to
improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4): support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k_
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=w2Kz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
|
||
|
Linus Torvalds
|
f79e772258 |
[GIT PULL for v6.18] media updates
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmjdReIACgkQCF8+vY7k 4RUyzxAAmqaYUomji7+Imoy/M9lFE5EBwC5HAZ2wfS9c8l7sYw9kZEaoq+JOapKB EU+dLr/judjpntmIOYqGPBgbVdzalGEvYsZ2KgVbygZS5JgF0K+Yb4ary3t+wN+H 43pGExsdRdwZhVU02xkSOohBcvWTEtWCjypdRSxSs03oLQtJ7AOcSNvsD25DTSNC 05l3Fr/5Ckjr9PpjjYaTX1SdRyPWoRD536yeGbbRo3ZTCGG8dFXwqZdhAqrMfFmb dAVttiTvMBHY/4LdA7YFLW/Ww3ty9uMgwv7D2LYCBPwKr01W32x4e0hZjQNjltlk omcw13oKMDhWm7bsB4ja2X3DjFLZnFcULyAtdhgR/+5748fIL82pp16XR80Zbweb UgO5WsUCQbYAfKdiu6CG/amwG1yHJW/2fRh6xD8WEKcsLjnIFhPN4rTsLXo6IeMY KVru2OOfXJUdo6fMfHk7EZElWGMS9H1iQy64v3eJe1bAIa0tMZKhwxrpAJTk1Ykf fvWdqdp761c1+P53is/LHtt7fqCN6aHsDcwXTCsJGH1YI4b/qxXjcgPMyedf6kRu GY+soXWcpldhxrR4yblMFhaJGFgIdFmnYDHWWzMxgQ0a8ch0ORf8aGlF5kT5SP+9 VPnZqY+EECrHqvI3DU4CaHNbZFXp6RKW+2ZkXFpIRH12v1aARmE= =Fuey -----END PGP SIGNATURE----- Merge tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Added a new V4L2 clock helper - New camera sensor drivers - iris: Enable H.264/H.265 encoder support and fixes in iris driver common code - camss: add support for new SoC flavors - venus: add new SoC support - tc358743: support more infoframe types - Various fixes, driver improvements and cleanups * tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits) media: venus: pm_helpers: add fallback for the opp-table media: qcom: camss: vfe: Fix BPL alignment for QCM2290 media: tuner: xc5000: Fix use-after-free in xc5000_release media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove media: vsp1: Export missing vsp1_isp_free_buffer symbol media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS() media: renesas: ceu: Convert to RUNTIME_PM_OPS() media: renesas: fdp1: Convert to RUNTIME_PM_OPS() media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS() media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS() media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls media: uvcvideo: Shorten the transfer size non compliance message media: uvcvideo: Do not re-reference dev->udev media: uvcvideo: Use intf instead of udev for printks media: uvcvideo: Move video_device under video_queue media: uvcvideo: Drop stream->mutex media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header ... |
||
|
Linus Torvalds
|
5832d26433 |
for-6.18/io_uring-20250929
-----BEGIN PGP SIGNATURE-----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=uc/3
-----END PGP SIGNATURE-----
Merge tag 'for-6.18/io_uring-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Store ring provided buffers locally for the users, rather than stuff
them into struct io_kiocb.
These types of buffers must always be fully consumed or recycled in
the current context, and leaving them in struct io_kiocb is hence not
a good ideas as that struct has a vastly different life time.
Basically just an architecture cleanup that can help prevent issues
with ring provided buffers in the future.
- Support for mixed CQE sizes in the same ring.
Before this change, a CQ ring either used the default 16b CQEs, or it
was setup with 32b CQE using IORING_SETUP_CQE32. For use cases where
a few 32b CQEs were needed, this caused everything else to use big
CQEs. This is wasteful both in terms of memory usage, but also memory
bandwidth for the posted CQEs.
With IORING_SETUP_CQE_MIXED, applications may use request types that
post both normal 16b and big 32b CQEs on the same ring.
- Add helpers for async data management, to make it harder for opcode
handlers to mess it up.
- Add support for multishot for uring_cmd, which ublk can use. This
helps improve efficiency, by providing a persistent request type that
can trigger multiple CQEs.
- Add initial support for ring feature querying.
We had basic support for probe operations, but the API isn't great.
Rather than expand that, add support for QUERY which is easily
expandable and can cover a lot more cases than the existing probe
support. This will help applications get a better idea of what
operations are supported on a given host.
- zcrx improvements from Pavel:
- Improve refill entry alignment for better caching
- Various cleanups, especially around deduplicating normal
memory vs dmabuf setup.
- Generalisation of the niov size (Patch 12). It's still hard
coded to PAGE_SIZE on init, but will let the user to specify
the rx buffer length on setup.
- Syscall / synchronous bufer return. It'll be used as a slow
fallback path for returning buffers when the refill queue is
full. Useful for tolerating slight queue size misconfiguration
or with inconsistent load.
- Accounting more memory to cgroups.
- Additional independent cleanups that will also be useful for
mutli-area support.
- Various fixes and cleanups
* tag 'for-6.18/io_uring-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (68 commits)
io_uring/cmd: drop unused res2 param from io_uring_cmd_done()
io_uring: fix nvme's 32b cqes on mixed cq
io_uring/query: cap number of queries
io_uring/query: prevent infinite loops
io_uring/zcrx: account niov arrays to cgroup
io_uring/zcrx: allow synchronous buffer return
io_uring/zcrx: introduce io_parse_rqe()
io_uring/zcrx: don't adjust free cache space
io_uring/zcrx: use guards for the refill lock
io_uring/zcrx: reduce netmem scope in refill
io_uring/zcrx: protect netdev with pp_lock
io_uring/zcrx: rename dma lock
io_uring/zcrx: make niov size variable
io_uring/zcrx: set sgt for umem area
io_uring/zcrx: remove dmabuf_offset
io_uring/zcrx: deduplicate area mapping
io_uring/zcrx: pass ifq to io_zcrx_alloc_fallback()
io_uring/zcrx: check all niovs filled with dma addresses
io_uring/zcrx: move area reg checks into io_import_area
io_uring/zcrx: don't pass slot to io_zcrx_create_area
...
|
||
|
Linus Torvalds
|
38057e3236 |
soc: driver updates for 6.18
Lots of platform specific updates for Qualcomm SoCs, including a new TEE subsystem driver for the Qualcomm QTEE firmware interface. Added support for the Apple A11 SoC in drivers that are shared with the M1/M2 series, among more updates for those. Smaller platform specific driver updates for Renesas, ASpeed, Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs. Driver updates in the cache controller, memory controller and reset controller subsystems. SCMI firmware updates to add more features and improve robustness. This includes support for having multiple SCMI providers in a single system. TEE subsystem support for protected DMA-bufs, allowing hardware to access memory areas that managed by the kernel but remain inaccessible from the CPU in EL1/EL0. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmjdpaoACgkQmmx57+YA GNnBXA//QgmFXYGG7QfB825mt0orKZxpfpLcwvqO7hkWgbXtl7Gokw2lGYN6bwLu zvY4MQ/bVoZ8R5uTVmuaSHBRsttSen8mBf+V0vzsBM/DRRVxvIN/7TESrY3J7Dtx J5syHKIBiUtdkDebWWC6jIElczIBItsd03Ln4Xjjt8Vas5YOO4n44zFrPo+FwlN/ I6D2K86AiNZTtUCDMtB6VfJ6YtjYBWcWnJm7FXw/vE8FAXdZUnNWnZ8hbdQ5GaME JZGepUhONaOMUoGNZNaDGw511RdPhYzPjj9rCsIx2qdsRO9/4tJ8ccpW2aUMYh8c nA6w8Hj8jCwco6aYYrDUDV9uRtURDrmyJgTJBNLU05e/L+MuJ3IZNlzHFWlsxIAE vhyTdmg/P04ClQyixCl67IH/66F/0smX9C+1761LrD7GTdfR92KPl5W6q+DPBg/x yf+s2p3+f7ItV5XobKOrbf3w0xazeDb5o/EK8BufMx9vSe9bpzJ0gOf0CmNXEpyZ owAhbh6wXX1YwPcyA9LHv6gthyJwc/3fLu49ggMZP2rU01ccKOYn9H0cr7C8NVmy wEpJR0lp5aSw2oRkPkxB6sFmUohcpr8/OXGGJuvCXkYsUY1BEup4lewvbIWK4WoE c84kbbaHsjgFhe3IRlQw3G4KLYQT3jRtF7fH+gPx556BcI6K+lg= =mcZR -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "Lots of platform specific updates for Qualcomm SoCs, including a new TEE subsystem driver for the Qualcomm QTEE firmware interface. Added support for the Apple A11 SoC in drivers that are shared with the M1/M2 series, among more updates for those. Smaller platform specific driver updates for Renesas, ASpeed, Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs. Driver updates in the cache controller, memory controller and reset controller subsystems. SCMI firmware updates to add more features and improve robustness. This includes support for having multiple SCMI providers in a single system. TEE subsystem support for protected DMA-bufs, allowing hardware to access memory areas that managed by the kernel but remain inaccessible from the CPU in EL1/EL0" * tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits) soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu() soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver soc: fsl: qe: Change GPIO driver to a proper platform driver tee: fix register_shm_helper() pmdomain: apple: Add "apple,t8103-pmgr-pwrstate" dt-bindings: spmi: Add Apple A11 and T2 compatible serial: qcom-geni: Load UART qup Firmware from linux side spi: geni-qcom: Load spi qup Firmware from linux side i2c: qcom-geni: Load i2c qup Firmware from linux side soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem soc: qcom: geni-se: Cleanup register defines and update copyright dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus Documentation: tee: Add Qualcomm TEE driver tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl tee: qcom: add primordial object tee: add Qualcomm TEE driver tee: increase TEE_MAX_ARG_SIZE to 4096 tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF tee: add close_context to TEE driver operation ... |
||
|
Linus Torvalds
|
ea1c6c5925 |
spi: Updates for v6.18
There's one big core change in this release, Jonas Gorski has addressed
the issues with multiple chip selects which makes things more robust and
stable. Otherwise there's quite a bit of driver work, as well as some
new drivers several existing drivers have had quite a bit of work done
on them.
Possibly the most interesting thing is the VirtIO driver, this is
apparently useful for some automotive applications which want to keep as
small and robust a host system as they can, moving less critical
functionality into guests.
- James Clark has done some substantial updates on the Freescale DSPI
driver, porting in code from the BSP and building onm top of that to
fix some bugs and increase performance.
- Jonas Gorski has fixed the issues with handling multple chip selects,
making things more robust and scalable.
- Support for higher performance modes in the NXP FSPI driver from
Haibo Chen.
- Removal of the obsolete S3C2443 driver, the underlying SoC support
has been removed from the kernel.
- Support for Amlogic AL113L2, Atmel SAMA7D65 and SAM9x7 and for VirtIO
controllers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmjacIwACgkQJNaLcl1U
h9CueQf/abv7rjoK4EbGeQBp3V3lQWAmB6en8SatMGf3ff8mKwsZLsePWYqpd8ir
e4Dk5mj+R6HYEDKdXg5SW6+5BpMyiiBkfJpUq7OMQg+86wOsBGHPuZw/65+sGc+R
hyy6AGf0YahmPiqeQVqJubYeqwWbFFCaOBWR3Q45aWhGQhRGG04vRESks1F247cl
EAuPhhBpS30o5NzhBanqW6s5scQ4dYFIIl/KTHZQyaRgG2lT4CvRObmhco+Yyl/O
4Mge0h/MMBx+UliuwQaPCp72h7DfA4iTeKdsnUYcfQW/OB3DZDye9HKN29k3CZyf
6brBp14ZZ+fvseg8GW/pAsT3YQIHwg==
=XwEA
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's one big core change in this release, Jonas Gorski has
addressed the issues with multiple chip selects which makes things
more robust and stable. Otherwise there's quite a bit of driver work,
as well as some new drivers several existing drivers have had quite a
bit of work done on them.
Possibly the most interesting thing is the VirtIO driver, this is
apparently useful for some automotive applications which want to keep
as small and robust a host system as they can, moving less critical
functionality into guests.
- James Clark has done some substantial updates on the Freescale DSPI
driver, porting in code from the BSP and building onm top of that
to fix some bugs and increase performance
- Jonas Gorski has fixed the issues with handling multple chip
selects, making things more robust and scalable
- Support for higher performance modes in the NXP FSPI driver from
Haibo Chen
- Removal of the obsolete S3C2443 driver, the underlying SoC support
has been removed from the kernel
- Support for Amlogic AL113L2, Atmel SAMA7D65 and SAM9x7 and for
VirtIO controllers"
* tag 'spi-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (74 commits)
spi: ljca: Remove Wentong's e-mail address
spi: rename SPI_CS_CNT_MAX => SPI_DEVICE_CS_CNT_MAX
spi: reduce device chip select limit again
spi: don't check spi_controller::num_chipselect when parsing a dt device
spi: drop check for validity of device chip selects
spi: move unused device CS initialization to __spi_add_device()
spi: keep track of number of chipselects in spi_device
spi: fix return code when spi device has too many chipselects
SPI: Add virtio SPI driver
virtio-spi: Add virtio-spi.h
virtio: Add ID for virtio SPI
spi: rpc-if: Add resume support for RZ/G3E
spi: rpc-if: Drop deprecated SIMPLE_DEV_PM_OPS
spi: spi-qpic-snand: simplify clock handling by using devm_clk_get_enabled()
spi: spi-nxp-fspi: Add OCT-DTR mode support
spi: spi-nxp-fspi: add the support for sample data from DQS pad
spi: spi-nxp-fspi: Add the DDR LUT command support
spi: spi-nxp-fspi: set back to dll override mode when clock rate < 100MHz
spi: spi-nxp-fspi: extract function nxp_fspi_dll_override()
spi: atmel-quadspi: Add support for sama7d65 QSPI
...
|
||
|
Linus Torvalds
|
989253cc46 |
hwmon updates for v6.18-rc1
* New drivers - Driver for Kontron SMARC-sAM67 - Driver for GPD device sensors - Driver for MP29502 - Driver for MP2869, MP29608, MP29612 and MP29816 series * Added chip support to existing drivers - asus-ec-sensors: Add B650E-I Add PRIME Z270-A Add Pro WS WRX90E-SAGE SE Add ROG STRIX X670E-E GAMING WIFI Add ROG STRIX X870-I GAMING WIFI Add ROG STRIX X870E-E GAMING WIFI Add ROG STRIX Z690-E GAMING WIFI Add ROG STRIX Z790E GAMING WIFI II Add STRIX B850-I GAMING WIFI Add TUF GAMING X670E PLUS WIFI Add X670E-I GAMING WIFI Add Z790-I GAMING WIFI - dell-smm: Add support for Dell OptiPlex 7040 - ina238: Major cleanup, and Add support for INA700 Add support for INA780 - k10temp: Add device ID for Strix Halo Add support for AMD Family 1Ah-based models - lenovo-ec-sensors: Update P8 supprt - lm75: Add NXP P3T1750 support - pmbus/adm1275: Add sq24905c support - pmbus/isl68137: Add support for Renesas RAA228244 and RAA228246 - pmbus/mp5990: Add support for MP5998 - sht21: Add support for SHT20, SHT25 - sl28cpld: Add sa67mcu compatible * Other notable changes - core: Handle locking internally Introduce 64-bit energy attribute support - cros_ec: Register into thermal framework, improve PWM control - lm75: allow interrupt for ti,tmp75 - mlxreg-fan: Add support for new flavour of capability register - sbtsi_temp: AMD CPU extended temperature range support - sht21: Add devicetree support * Various other minor improvements and fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmjZ2VAACgkQyx8mb86f mYHegQ//YImjHnlWcRbr8meprHHezIkGDA0nJEzjsCSD7owq00sOC4w4BGXf7MPV d1rK0VbAU2Up53j4xZKr7PnHzUHFil/K/9hDBHFfYd6fr570ADdMnewRmVoKuSuR JBeV0308y0WbeAhNOaIIcGx3/4wMgQklvUycjOZKUgBC2jY/vnuwlgrt21a4rbB/ c5yNUEfqk9thZY/xOBbbrcvej0RXZ/naV+tRgVYQUo6Ep1CUynxOr2VCUbWxoQWh lnekEhJuylbIDodAZ405Cpn3AuqyVypbKBjAyGWSwl92KuoYyBGJnbk/GYokWvCH ftMlLF+HUbNRd75W3mwxZOuSX5tIps2NP8aQrdRdOxhF6Ln5b49R4NLI7ZqnOVzO syRo96J1joMIGwfRga/b8dqCLYZ45fX2VbfisdhrzZ0OM3e7yg3fVyJRbxubP+n6 VxCQPfFUQoLKGOAiBfCA5yYCDE+qFXT1HBKORhtUF/wZnq6X7rYMtC0ci0TfcKo0 Ar0s4xnxX2avFhySvuJL7snv01oOR/9SkCrKY4LqXETMSvNwTNQjLKGo0uly+Mxs bs63JFnLtA1BHXvPuFklxDMAqQ4KZZAz1AznePFV7uFRk2VRbzKf1GkS4S9jVlc+ 2/nKb2gWBVdtAqone0D0dC9EoFNZwGqCPuymyTgEkYkO0vgZ2qs= =jb6g -----END PGP SIGNATURE----- Merge tag 'hwmon-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers: - Kontron SMARC-sAM67 - GPD device sensors - MP29502 - MP2869, MP29608, MP29612 and MP29816 series Added chip support to existing drivers: - asus-ec-sensors: Add B650E-I Add PRIME Z270-A Add Pro WS WRX90E-SAGE SE Add ROG STRIX X670E-E GAMING WIFI Add ROG STRIX X870-I GAMING WIFI Add ROG STRIX X870E-E GAMING WIFI Add ROG STRIX Z690-E GAMING WIFI Add ROG STRIX Z790E GAMING WIFI II Add STRIX B850-I GAMING WIFI Add TUF GAMING X670E PLUS WIFI Add X670E-I GAMING WIFI Add Z790-I GAMING WIFI - dell-smm: Add support for Dell OptiPlex 7040 - ina238: Major cleanup, and Add support for INA700 Add support for INA780 - k10temp: Add device ID for Strix Halo Add support for AMD Family 1Ah-based models - lenovo-ec-sensors: Update P8 supprt - lm75: Add NXP P3T1750 support - pmbus/adm1275: Add sq24905c support - pmbus/isl68137: Add support for Renesas RAA228244 and RAA228246 - pmbus/mp5990: Add support for MP5998 - sht21: Add support for SHT20, SHT25 - sl28cpld: Add sa67mcu compatible Other notable changes: - core: Handle locking internally Introduce 64-bit energy attribute support - cros_ec: Register into thermal framework, improve PWM control - lm75: allow interrupt for ti,tmp75 - mlxreg-fan: Add support for new flavour of capability register - sbtsi_temp: AMD CPU extended temperature range support - sht21: Add devicetree support Various other minor improvements and fixes" * tag 'hwmon-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits) dt-bindings: hwmon: (lm75) allow interrupt for ti,tmp75 hwmon: (mlxreg-fan) Add support for new flavour of capability register hwmon: (mlxreg-fan) Separate methods of fan setting coming from different subsystems hwmon: (cros_ec) register fans into thermal framework cooling devices hwmon: (cros_ec) add PWM control over fans platform/chrome: update pwm fan control host commands hwmon: add SMARC-sAM67 support dt-bindings: hwmon: sl28cpld: add sa67mcu compatible hwmon: (asus-ec-sensors) add TUF GAMING X670E PLUS WIFI hwmon: (dell-smm) Add support for Dell OptiPlex 7040 hwmon: (dell-smm) Add support for automatic fan mode hwmon: (gpd-fan) complete Kconfig dependencies hwmon: (asus-ec-sensors) increase timeout for locking ACPI mutex hwmon: (asus-ec-sensors) add ROG STRIX X870E-E GAMING WIFI hwmon: (dell-smm) Move clamping of fan speed out of i8k_set_fan() hwmon: (dell-smm) Remove Dell Precision 490 custom config data hwmon: (asus-ec-sensors) add ROG STRIX X670E-E GAMING WIFI hwmon: (gpd-fan) Fix range check for pwm input hwmon: (pmbus/mp5990) add support for MP5998 dt-bindings: trivial-devices: add mps,mp5998 ... |
||
|
Paolo Abeni
|
1a98f5699b |
Revert "Documentation: net: add flow control guide and document ethtool API"
This reverts commit 7bd80ed89d72285515db673803b021469ba71ee8. I should not have merged it to begin with due to pending review and changes to be addressed. Link: https://patch.msgid.link/c6f3af12df9b7998920a02027fc8893ce82afc4c.1759239721.git.pabeni@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Linus Torvalds
|
ae28ed4578 |
bpf-next-6.18
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmjZH40ACgkQ6rmadz2v bTrG7w//X/5CyDoKIYJCqynYRdMtfqYuCe8Jhud4p5++iBVqkDyS6Y8EFLqZVyg/ UHTqaSE4Nz8/pma0WSjhUYn6Chs1AeH+Rw/g109SovE/YGkek2KNwY3o2hDrtPMX +oD0my8qF2HLKgEyteXXyZ5Ju+AaF92JFiGko4/wNTX8O99F9nyz2pTkrctS9Vl9 VwuTxrEXpmhqrhP3WCxkfNfcbs9HP+AALpgOXZKdMI6T4KI0N1gnJ0ZWJbiXZ8oT tug0MTPkNRidYMl0wHY2LZ6ZG8Q3a7Sgc+M0xFzaHGvGlJbBg1HjsDMtT6j34CrG TIVJ/O8F6EJzAnQ5Hio0FJk8IIgMRgvng5Kd5GXidU+mE6zokTyHIHOXitYkBQNH Hk+lGA7+E2cYqUqKvB5PFoyo+jlucuIH7YwrQlyGfqz+98n65xCgZKcmdVXr0hdB 9v3WmwJFtVIoPErUvBC3KRANQYhFk4eVk1eiGV/20+eIVyUuNbX6wqSWSA9uEXLy n5fm/vlk4RjZmrPZHxcJ0dsl9LTF1VvQQHkgoC1Sz/Cc+jA6k4I+ECVHAqEbk36p 1TUF52yPOD2ViaJKkj+962JaaaXlUn6+Dq7f1GMP6VuyHjz4gsI3mOo4XarqNdWd c7TnYmlGO/cGwqd4DdbmWiF1DDsrBcBzdbC8+FgffxQHLPXGzUg= =LeQi -----END PGP SIGNATURE----- Merge tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Pull bpf updates from Alexei Starovoitov: - Support pulling non-linear xdp data with bpf_xdp_pull_data() kfunc (Amery Hung) Applied as a stable branch in bpf-next and net-next trees. - Support reading skb metadata via bpf_dynptr (Jakub Sitnicki) Also a stable branch in bpf-next and net-next trees. - Enforce expected_attach_type for tailcall compatibility (Daniel Borkmann) - Replace path-sensitive with path-insensitive live stack analysis in the verifier (Eduard Zingerman) This is a significant change in the verification logic. More details, motivation, long term plans are in the cover letter/merge commit. - Support signed BPF programs (KP Singh) This is another major feature that took years to materialize. Algorithm details are in the cover letter/marge commit - Add support for may_goto instruction to s390 JIT (Ilya Leoshkevich) - Add support for may_goto instruction to arm64 JIT (Puranjay Mohan) - Fix USDT SIB argument handling in libbpf (Jiawei Zhao) - Allow uprobe-bpf program to change context registers (Jiri Olsa) - Support signed loads from BPF arena (Kumar Kartikeya Dwivedi and Puranjay Mohan) - Allow access to union arguments in tracing programs (Leon Hwang) - Optimize rcu_read_lock() + migrate_disable() combination where it's used in BPF subsystem (Menglong Dong) - Introduce bpf_task_work_schedule*() kfuncs to schedule deferred execution of BPF callback in the context of a specific task using the kernel’s task_work infrastructure (Mykyta Yatsenko) - Enforce RCU protection for KF_RCU_PROTECTED kfuncs (Kumar Kartikeya Dwivedi) - Add stress test for rqspinlock in NMI (Kumar Kartikeya Dwivedi) - Improve the precision of tnum multiplier verifier operation (Nandakumar Edamana) - Use tnums to improve is_branch_taken() logic (Paul Chaignon) - Add support for atomic operations in arena in riscv JIT (Pu Lehui) - Report arena faults to BPF error stream (Puranjay Mohan) - Search for tracefs at /sys/kernel/tracing first in bpftool (Quentin Monnet) - Add bpf_strcasecmp() kfunc (Rong Tao) - Support lookup_and_delete_elem command in BPF_MAP_STACK_TRACE (Tao Chen) * tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (197 commits) libbpf: Replace AF_ALG with open coded SHA-256 selftests/bpf: Add stress test for rqspinlock in NMI selftests/bpf: Add test case for different expected_attach_type bpf: Enforce expected_attach_type for tailcall compatibility bpftool: Remove duplicate string.h header bpf: Remove duplicate crypto/sha2.h header libbpf: Fix error when st-prefix_ops and ops from differ btf selftests/bpf: Test changing packet data from kfunc selftests/bpf: Add stacktrace map lookup_and_delete_elem test case selftests/bpf: Refactor stacktrace_map case with skeleton bpf: Add lookup_and_delete_elem for BPF_MAP_STACK_TRACE selftests/bpf: Fix flaky bpf_cookie selftest selftests/bpf: Test changing packet data from global functions with a kfunc bpf: Emit struct bpf_xdp_sock type in vmlinux BTF selftests/bpf: Task_work selftest cleanup fixes MAINTAINERS: Delete inactive maintainers from AF_XDP bpf: Mark kfuncs as __noclone selftests/bpf: Add kprobe multi write ctx attach test selftests/bpf: Add kprobe write ctx attach test selftests/bpf: Add uprobe context ip register change test ... |
||
|
Linus Torvalds
|
22bdd6e68b |
- Add functionality to provide runtime firmware updates for the non-x86 parts
of an AMD platform like the security processor (ASP) firmware, modules etc, for example. The intent being that these updates are interim, live fixups before a proper BIOS update can be attempted - Add guest support for AMD's Secure AVIC feature which gives encrypted guests the needed protection against a malicious hypervisor generating unexpected interrupts and injecting them into such guest, thus interfering with its operation in an unexpected and negative manner. The advantage of this scheme is that the guest determines which interrupts and when to accept them vs leaving that to the benevolence (or not) of the hypervisor - Strictly separate the startup code from the rest of the kernel where former is executed from the initial 1:1 mapping of memory. The problem was that the toolchain-generated version of the code was being executed from a different mapping of memory than what was "assumed" during code generation, needing an ever-growing pile of fixups for absolute memory references which are invalid in the early, 1:1 memory mapping during boot. The major advantage of this is that there's no need to check the 1:1 mapping portion of the code for absolute relocations anymore and get rid of the RIP_REL_REF() macro sprinkling all over the place. For more info, see Ard's very detailed writeup on this: https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com - The usual cleanups and fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmjWaaMACgkQEsHwGGHe VUr/RBAAnfneG+5U7f5x+hYW68mwZu07eoQn02IW9WGb2xjV6LKYxzDqyEj/+l+x jgN77i1uhl/4sqqKBvUjFfgot1gQ0g6M2fok2eZscSf+AHZF+LfDJPl4dFheVENo KtPieu1yi2bA+stL9JgaKh0I1ELX40qebXeZY4H4rYVzokHG0H+CEcuhv6Es71bW 1C6efkZKHS3pAhlRUoa2MZagxnw+3mn9bfZDvSSNNM6I4qy9/CAPZlWw0jGrXKQX K/gjBI2KcoqK2bdJtCQsTvbrsuBedjkM6BZveAAhvOVCh6Aq6lnbqirJPJX8WJLq bIDAdsWGJ1vOzcgiPwT0e3qsfaTWep6MewcAQ/HnzrksH+IFb7J/l9awUgGY6LFh GzG7KPEKIWiLOxYFC+gLxRn8SWhcXHeY/fB8i5OOnhnikODWG4bJtM8F1MTQO4O1 u2UuZ+wNzgdatJDXmLK1eluyuhkIqCZ7Hd8kpE0Zr32rbipEvuxnUPSyMzfhDM9M +UJGm3C205vPU6doRG8X0+EosFGCyZcixQNXhOugmedT5g3XGHHoJtiLj2i29jLN Xi0npxh2hwBe6N+WcIRnOfonFTsp6wWYatWPnGWTChpe+OGj9ZISXpmxnFUVCSag spG1J+upBA7ck1exuwpS3ldNSiw/066iTxB7Ht02vbeQ4JXIF6M= =shVa -----END PGP SIGNATURE----- Merge tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SEV and apic updates from Borislav Petkov: - Add functionality to provide runtime firmware updates for the non-x86 parts of an AMD platform like the security processor (ASP) firmware, modules etc, for example. The intent being that these updates are interim, live fixups before a proper BIOS update can be attempted - Add guest support for AMD's Secure AVIC feature which gives encrypted guests the needed protection against a malicious hypervisor generating unexpected interrupts and injecting them into such guest, thus interfering with its operation in an unexpected and negative manner. The advantage of this scheme is that the guest determines which interrupts and when to accept them vs leaving that to the benevolence (or not) of the hypervisor - Strictly separate the startup code from the rest of the kernel where former is executed from the initial 1:1 mapping of memory. The problem was that the toolchain-generated version of the code was being executed from a different mapping of memory than what was "assumed" during code generation, needing an ever-growing pile of fixups for absolute memory references which are invalid in the early, 1:1 memory mapping during boot. The major advantage of this is that there's no need to check the 1:1 mapping portion of the code for absolute relocations anymore and get rid of the RIP_REL_REF() macro sprinkling all over the place. For more info, see Ard's very detailed writeup on this [1] - The usual cleanups and fixes Link: https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com [1] * tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits) x86/boot: Drop erroneous __init annotation from early_set_pages_state() crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver crypto: ccp - Add new HV-Fixed page allocation/free API x86/sev: Add new dump_rmp parameter to snp_leak_pages() API x86/startup/sev: Document the CPUID flow in the boot #VC handler objtool: Ignore __pi___cfi_ prefixed symbols x86/sev: Zap snp_abort() x86/apic/savic: Do not use snp_abort() x86/boot: Get rid of the .head.text section x86/boot: Move startup code out of __head section efistub/x86: Remap inittext read-execute when needed x86/boot: Create a confined code area for startup code x86/kbuild: Incorporate boot/startup/ via Kbuild makefile x86/boot: Revert "Reject absolute references in .head.text" x86/boot: Check startup code for absence of absolute relocations objtool: Add action to check for absence of absolute relocations x86/sev: Export startup routines for later use x86/sev: Move __sev_[get|put]_ghcb() into separate noinstr object x86/sev: Provide PIC aliases for SEV related data objects x86/boot: Provide PIC aliases for 5-level paging related constants ... |
||
|
Paolo Bonzini
|
10ef74c06b |
KVM SEV-SNP CipherText Hiding support for 6.18
Add support for SEV-SNP's CipherText Hiding, an opt-in feature that prevents unauthorized CPU accesses from reading the ciphertext of SNP guest private memory, e.g. to attempt an offline attack. Instead of ciphertext, the CPU will always read back all FFs when CipherText Hiding is enabled. Add new module parameter to the KVM module to enable CipherText Hiding and control the number of ASIDs that can be used for VMs with CipherText Hiding, which is in effect the number of SNP VMs. When CipherText Hiding is enabled, the hared SEV-ES/SEV-SNP ASID space is split into separate ranges for SEV-ES and SEV-SNP guests, i.e. ASIDs that can be used for CipherText Hiding cannot be used to run SEV-ES guests. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEKTobbabEP7vbhhN9OlYIJqCjN/0FAmjXG0EACgkQOlYIJqCj N/1TKQ//UlPcGwoR9cl9V5YRz0b+wNOHNh7JqOTdQsEa00qqIXaAnK+M77Jynvmj YqnQbFCxnQS2pQWkSKv3eJ9Kc9ndTBA7+lL3rrHot6ccks3xM0cHe8Bquu8Of/Ht 1qla1OazrYjJBjFdYCzO+ZQdUvSNAr5RkOPO1KrnHZPELPOQt0+LbxlewRRbKHIj hea8KgmRqmlRJYDJlOGh+G/FFDCFqaeXyOfEkeBuYyCAL60r+0IMHKMwrwlDx/1+ Kzlrf65YuMZlgg7AjhA2mXj4DvlSQkPnMkmkNmNgPXI1XNgHDS/7M1f2m/QbgGV8 Y1D1/GY5u5YD30zDHCmmqPocs5sxrsVoAH8cHalMQsiDlr/HfoKlQ+w0aHEQnHFJ j4GnfCIkyx77tPHeS8e8RJk8qXs+0Bf2bzOAQkv0f/k6JaWhiLzISTFOTyztaf8v m7gPWJORWGZyWVBk+Ad+KGh5Ww2o+sY3aufp81JBT12kC17G0xsHrO1XvUV6YDQ7 wSINQap0TQFY2Lh9Vr1GDNx4jk+YnQOjqKbqd6efyv8No4+j75eaCkbAItma9YVc EPGYa+LaRoC58f7LIChT0uXTAkK7lgdAuGwice7CPsRTjPJqxneIL7u6ohO9jAkz EysFgzsozLynnVUPmXqf5SDots1G5RrAne8Bj+6tLaGxCjW+lLI= =mc41 -----END PGP SIGNATURE----- Merge tag 'kvm-x86-ciphertext-6.18' of https://github.com/kvm-x86/linux into HEAD KVM SEV-SNP CipherText Hiding support for 6.18 Add support for SEV-SNP's CipherText Hiding, an opt-in feature that prevents unauthorized CPU accesses from reading the ciphertext of SNP guest private memory, e.g. to attempt an offline attack. Instead of ciphertext, the CPU will always read back all FFs when CipherText Hiding is enabled. Add new module parameter to the KVM module to enable CipherText Hiding and control the number of ASIDs that can be used for VMs with CipherText Hiding, which is in effect the number of SNP VMs. When CipherText Hiding is enabled, the shared SEV-ES/SEV-SNP ASID space is split into separate ranges for SEV-ES and SEV-SNP guests, i.e. ASIDs that can be used for CipherText Hiding cannot be used to run SEV-ES guests. |
||
|
Paolo Bonzini
|
6a13749717 |
LoongArch KVM changes for v6.18
1. Add PTW feature detection on new hardware. 2. Add sign extension with kernel MMIO/IOCSR emulation. 3. Improve in-kernel IPI emulation. 4. Improve in-kernel PCH-PIC emulation. 5. Move kvm_iocsr tracepoint out of generic code. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmjTd/wWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImep7+D/4uA7triOH1eB4TikB6NlF3T+ry 1qLycMy+O8mm24UxT0217sqOtKiZHrglyJB+cCmxPNjq0vWX/F08VgNoh8+6feWL 6X28YlJ8qcRGCTUxlaaleEGIiXt7lbbnZKFfiBn8Ibb9rHn3tE8V738Kzm+SV1Dr bSZlAGnAqp/pRI1UFBQ0T+GpqQz+UvDw8JCOJj5Vs5UylhDY3atPaNhLjfR2tkUh AFrqr87gKPHdJxmk//7u+e6QLGViBB9aO1fNMP6y8gViJRfkCEbbm8XYe0qe+SmO QpLKuHBEVo7C8vOzemEVieQX2VujDcGSDDRGCU3wKbIpbIQgmOGbbsKfrKf9FxaR 8ieNyP3UExr2ZvYV9SOLqeLD2K2yox9EkO7tD2CM9kwev9HUtr+6e/OaIP3Sjth2 rd7V47x/8bCdgt0grQXIxejebbO5NawnFjXlFS7M2SRQXLMtyfFbiuZVGw0kZ+nn rzMeodQVmGi518nmmc9YcyW0/R8qer9DaaiN1ybgVF/4ZSK+LhlZo7xv4Dv5bWuv ThR89Iz09xUmmGYDniAR6q3/zH/52lJAuNU4tQGwB6O/+z8qJR0tZFM86KnApyLU pGI3q1s0g9ZK9mouaM+jcV5/fzFGoTXGkIQqaaXOqob97klagudAdBWKN74YynT2 rAU7sWXF6F9WsKX2sA== =keSO -----END PGP SIGNATURE----- Merge tag 'loongarch-kvm-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD LoongArch KVM changes for v6.18 1. Add PTW feature detection on new hardware. 2. Add sign extension with kernel MMIO/IOCSR emulation. 3. Improve in-kernel IPI emulation. 4. Improve in-kernel PCH-PIC emulation. 5. Move kvm_iocsr tracepoint out of generic code. |
||
|
Paolo Bonzini
|
924ccf1d09 |
KVM/riscv changes for 6.18
- Added SBI FWFT extension for Guest/VM with misaligned delegation and pointer masking PMLEN features - Added ONE_REG interface for SBI FWFT extension - Added Zicbop and bfloat16 extensions for Guest/VM - Enabled more common KVM selftests for RISC-V such as access_tracking_perf_test, dirty_log_perf_test, memslot_modification_stress_test, memslot_perf_test, mmu_stress_test, and rseq_test - Added SBI v3.0 PMU enhancements in KVM and perf driver -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmjU1XEACgkQrUjsVaLH LAfahQ//aPSwG0jbPwRSmWtoqdm38VvKYuWOOxeCjKyas5w0cZPkMQCh3zV/Ks92 YKNIe6wlDeLIlT+qIzAi5VLwHHiC3ggoJsuNhf7/qmJJvks+1quvl1clUDkVGbRu G+FKFkRpBa1HF2O3NASnvBnRLYzXa/wKOuArwsY5DEG4+irnJU3AegbqRuhyPBFr VX+LwpfUUHipFGg/0ivflsVBjcz42Y3i1VQ4oXzuHqsRn3Ig3eSy9dGTHIOqJ0A3 leNbDUSdZxnMlj3Sfab7hH4Vxlr8kiCEgMogHyYpnlyPvG8zJobMWDE9Ziy86D7f 130zMcHuF0ZkeuaKX+3o2L7yGNTnN/JNtns7VtClRShGqSA8Dtn2xLhnvyray7RH CIYjv//34z1BjWyCBfuN5kFIfX5K7cNQHlDP7RVfgw91k7rbCGCJF743nkxz1WBX 98G05/Rnmn+KCtU8t2pRoG9Qkq+bE3iz8Ka8thmiUNciqO78nn/p7a6OEMcjn7jH C+VUNST519UBGCjLehBrCZuUOtrPRozHz7Adx3VTJT5wBX2hd/QLoNoMssEi9VmS 1j/abh7HJcbe7aTUDWUhOK9I+bPHJRsbeNyL5r9jpoC2Xg5Njh/V3aQZ/uuLzO5+ pYjciRrrmdZ30xkInulWI6wORHkmki34RRmsM9gqYIJBMV+Rcxg= =BCyU -----END PGP SIGNATURE----- Merge tag 'kvm-riscv-6.18-1' of https://github.com/kvm-riscv/linux into HEAD KVM/riscv changes for 6.18 - Added SBI FWFT extension for Guest/VM with misaligned delegation and pointer masking PMLEN features - Added ONE_REG interface for SBI FWFT extension - Added Zicbop and bfloat16 extensions for Guest/VM - Enabled more common KVM selftests for RISC-V such as access_tracking_perf_test, dirty_log_perf_test, memslot_modification_stress_test, memslot_perf_test, mmu_stress_test, and rseq_test - Added SBI v3.0 PMU enhancements in KVM and perf driver |
||
|
Paolo Bonzini
|
8cbb0df294 |
KVM/arm64 changes for 6.17, round #3
- Invalidate nested MMUs upon freeing the PGD to avoid WARNs when
visiting from an MMU notifier
- Fixes to the TLB match process and TLB invalidation range for
managing the VCNR pseudo-TLB
- Prevent SPE from erroneously profiling guests due to UNKNOWN reset
values in PMSCR_EL1
- Fix save/restore of host MDCR_EL2 to account for eagerly programming
at vcpu_load() on VHE systems
- Correct lock ordering when dealing with VGIC LPIs, avoiding scenarios
where an xarray's spinlock was nested with a *raw* spinlock
- Permit stage-2 read permission aborts which are possible in the case
of NV depending on the guest hypervisor's stage-2 translation
- Call raw_spin_unlock() instead of the internal spinlock API
- Fix parameter ordering when assigning VBAR_EL1
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCaMHCvxccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFqbCAP9ygpb3tkpAPkbaB68IwyJgGD/C
59f2NTUGkzak20SjHAD+IcvQV8GemDsGNvSvjpb08KrNWMUxeuOBiAp/IvqrqwU=
=VrcD
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, round #3
- Invalidate nested MMUs upon freeing the PGD to avoid WARNs when
visiting from an MMU notifier
- Fixes to the TLB match process and TLB invalidation range for
managing the VCNR pseudo-TLB
- Prevent SPE from erroneously profiling guests due to UNKNOWN reset
values in PMSCR_EL1
- Fix save/restore of host MDCR_EL2 to account for eagerly programming
at vcpu_load() on VHE systems
- Correct lock ordering when dealing with VGIC LPIs, avoiding scenarios
where an xarray's spinlock was nested with a *raw* spinlock
- Permit stage-2 read permission aborts which are possible in the case
of NV depending on the guest hypervisor's stage-2 translation
- Call raw_spin_unlock() instead of the internal spinlock API
- Fix parameter ordering when assigning VBAR_EL1
[Pull into kvm/master to fix conflicts. - Paolo]
|
||
|
Linus Torvalds
|
56a0810d8c |
audit/stable-6.18 PR 20250926
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmjWq5oUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPTjRAAwYapnw+ZGdFtTGIDT63HtlKjCGHg DRR8J1RYWhxQL78dInjl7hlGPd4ULdpdF6zsh27X/8OsdFotw4NhDyPJwS1qWZv9 uBJMy/s1Qi1V/rrtDygLGgkQ9ICfl/hgVh3L+g9AXU8H9IapMULp33z+2ueFU4rA PXgXppgNQTOhIQml0tagY7iPlLaaI1uPv/Dbvt792CSrKZReC+uiDSQKD6SUy5oJ NBRs0emdCqbllo8Eo7wTGdfzUttsPWYHe7X9BGCMK2bHp0BpMnFBDtuipUAgjNE8 O16EkAtBMpEBW9VEFvDYW1jMFO7ccD8b09CbqPLdE7E0GeigTiODg+FdncKEpZn0 Dl4xPbIoPBHVrDHKFK3HcuEdUs0FZH3NpTLFRg0/nWbg3CfSOFq1ZKhSbwLTZ48V 2Iq22G0hIIl3yTEePSoR8xCSQkWf6hA1SVvzBqw5Xn1tnkdIUuM+KzeZUPKxCOiH r5b3ufrN5YMAcmc59q393sNuSMd7s97fohhK8/HouB93EcVNM2UjLEKVJnhMhYRE N21O17jwQG9F+OYTnmtMzuUF6yxwSAmkzQOg6F+lalJ8MECnNrZOEeyuA3d5ISi5 4ZrXHWw90qaDy9lCV1o0UwWt9na+WxeMCJNpI07h5V1k3x7BULiI6WeP7J1qnY9r YlLv/6Hgx29dtqE= =iQal -----END PGP SIGNATURE----- Merge tag 'audit-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: - Proper audit support for multiple LSMs As the audit subsystem predated the work to enable multiple LSMs, some additional work was needed to support logging the different LSM labels for the subjects/tasks and objects on the system. Casey's patches add new auxillary records for subjects and objects that convey the additional labels. - Ensure fanotify audit events are always generated Generally speaking security relevant subsystems always generate audit events, unless explicitly ignored. However, up to this point fanotify events had been ignored by default, but starting with this pull request fanotify follows convention and generates audit events by default. - Replace an instance of strcpy() with strscpy() - Minor indentation, style, and comment fixes * tag 'audit-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: fix skb leak when audit rate limit is exceeded audit: init ab->skb_list earlier in audit_buffer_alloc() audit: add record for multiple object contexts audit: add record for multiple task security contexts lsm: security_lsmblob_to_secctx module selection audit: create audit_stamp structure audit: add a missing tab audit: record fanotify event regardless of presence of rules audit: fix typo in auditfilter.c comment audit: Replace deprecated strcpy() with strscpy() audit: fix indentation in audit_log_exit() |
||
|
Benjamin Tissoires
|
b3f126f400 |
Merge branch 'for-6.18/haptic' into for-linus
- Implement haptic touchpad support (Angela Czubak and Jonathan Denose) |
||
|
Oleksij Rempel
|
7bd80ed89d |
Documentation: net: add flow control guide and document ethtool API
Introduce a new document, flow_control.rst, to provide a comprehensive guide on Ethernet Flow Control in Linux. The guide explains how flow control works, how autonegotiation resolves pause capabilities, and how to configure it using ethtool and Netlink. In parallel, document the pause and pause-stat attributes in the ethtool.yaml netlink spec. This enables the ynl tool to generate kernel-doc comments for the corresponding enums in the UAPI header, making the C interface self-documenting. Finally, replace the legacy flow control section in phy.rst with a reference to the new document and add pointers in the relevant C source files. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250924120241.724850-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Ivan Vecera
|
a680581f6a |
dpll: add phase-offset-avg-factor device attribute to netlink spec
Add dpll device level attribute DPLL_A_PHASE_OFFSET_AVG_FACTOR to allow control over a calculation of reported phase offset value. Attribute is present, if the driver provides such capability, otherwise attribute shall not be present. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250927084912.2343597-2-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
18b19abc37 |
namespace-6.18-rc1
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQgQAKCRCRxhvAZXjc oiFXAQCpbLvkWbld9wLgxUBhq+q+kw5NvGxzpvqIhXwJB9F9YAEA44/Wevln4xGx +kRUbP+xlRQqenIYs2dLzVHzAwAdfQ4= =EO4Y -----END PGP SIGNATURE----- Merge tag 'namespace-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull namespace updates from Christian Brauner: "This contains a larger set of changes around the generic namespace infrastructure of the kernel. Each specific namespace type (net, cgroup, mnt, ...) embedds a struct ns_common which carries the reference count of the namespace and so on. We open-coded and cargo-culted so many quirks for each namespace type that it just wasn't scalable anymore. So given there's a bunch of new changes coming in that area I've started cleaning all of this up. The core change is to make it possible to correctly initialize every namespace uniformly and derive the correct initialization settings from the type of the namespace such as namespace operations, namespace type and so on. This leaves the new ns_common_init() function with a single parameter which is the specific namespace type which derives the correct parameters statically. This also means the compiler will yell as soon as someone does something remotely fishy. The ns_common_init() addition also allows us to remove ns_alloc_inum() and drops any special-casing of the initial network namespace in the network namespace initialization code that Linus complained about. Another part is reworking the reference counting. The reference counting was open-coded and copy-pasted for each namespace type even though they all followed the same rules. This also removes all open accesses to the reference count and makes it private and only uses a very small set of dedicated helpers to manipulate them just like we do for e.g., files. In addition this generalizes the mount namespace iteration infrastructure introduced a few cycles ago. As reminder, the vfs makes it possible to iterate sequentially and bidirectionally through all mount namespaces on the system or all mount namespaces that the caller holds privilege over. This allow userspace to iterate over all mounts in all mount namespaces using the listmount() and statmount() system call. Each mount namespace has a unique identifier for the lifetime of the systems that is exposed to userspace. The network namespace also has a unique identifier working exactly the same way. This extends the concept to all other namespace types. The new nstree type makes it possible to lookup namespaces purely by their identifier and to walk the namespace list sequentially and bidirectionally for all namespace types, allowing userspace to iterate through all namespaces. Looking up namespaces in the namespace tree works completely locklessly. This also means we can move the mount namespace onto the generic infrastructure and remove a bunch of code and members from struct mnt_namespace itself. There's a bunch of stuff coming on top of this in the future but for now this uses the generic namespace tree to extend a concept introduced first for pidfs a few cycles ago. For a while now we have supported pidfs file handles for pidfds. This has proven to be very useful. This extends the concept to cover namespaces as well. It is possible to encode and decode namespace file handles using the common name_to_handle_at() and open_by_handle_at() apis. As with pidfs file handles, namespace file handles are exhaustive, meaning it is not required to actually hold a reference to nsfs in able to decode aka open_by_handle_at() a namespace file handle. Instead the FD_NSFS_ROOT constant can be passed which will let the kernel grab a reference to the root of nsfs internally and thus decode the file handle. Namespaces file descriptors can already be derived from pidfds which means they aren't subject to overmount protection bugs. IOW, it's irrelevant if the caller would not have access to an appropriate /proc/<pid>/ns/ directory as they could always just derive the namespace based on a pidfd already. It has the same advantage as pidfds. It's possible to reliably and for the lifetime of the system refer to a namespace without pinning any resources and to compare them trivially. Permission checking is kept simple. If the caller is located in the namespace the file handle refers to they are able to open it otherwise they must hold privilege over the owning namespace of the relevant namespace. The namespace file handle layout is exposed as uapi and has a stable and extensible format. For now it simply contains the namespace identifier, the namespace type, and the inode number. The stable format means that userspace may construct its own namespace file handles without going through name_to_handle_at() as they are already allowed for pidfs and cgroup file handles" * tag 'namespace-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (65 commits) ns: drop assert ns: move ns type into struct ns_common nstree: make struct ns_tree private ns: add ns_debug() ns: simplify ns_common_init() further cgroup: add missing ns_common include ns: use inode initializer for initial namespaces selftests/namespaces: verify initial namespace inode numbers ns: rename to __ns_ref nsfs: port to ns_ref_*() helpers net: port to ns_ref_*() helpers uts: port to ns_ref_*() helpers ipv4: use check_net() net: use check_net() net-sysfs: use check_net() user: port to ns_ref_*() helpers time: port to ns_ref_*() helpers pid: port to ns_ref_*() helpers ipc: port to ns_ref_*() helpers cgroup: port to ns_ref_*() helpers ... |
||
|
Linus Torvalds
|
b7ce6fa90f |
vfs-6.18-rc1.misc
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQMQAKCRCRxhvAZXjc
omNLAQCgrwzd9sa1JTlixweu3OAxQlSEbLuMpEv7Ztm+B7Wz0AD9HtwPC44Kev03
GbMcB2DCFLC4evqYECj6IG7NBmoKsAs=
=1ICf
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add "initramfs_options" parameter to set initramfs mount options.
This allows to add specific mount options to the rootfs to e.g.,
limit the memory size
- Add RWF_NOSIGNAL flag for pwritev2()
Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE
signal from being raised when writing on disconnected pipes or
sockets. The flag is handled directly by the pipe filesystem and
converted to the existing MSG_NOSIGNAL flag for sockets
- Allow to pass pid namespace as procfs mount option
Ever since the introduction of pid namespaces, procfs has had very
implicit behaviour surrounding them (the pidns used by a procfs
mount is auto-selected based on the mounting process's active
pidns, and the pidns itself is basically hidden once the mount has
been constructed)
This implicit behaviour has historically meant that userspace was
required to do some special dances in order to configure the pidns
of a procfs mount as desired. Examples include:
* In order to bypass the mnt_too_revealing() check, Kubernetes
creates a procfs mount from an empty pidns so that user
namespaced containers can be nested (without this, the nested
containers would fail to mount procfs)
But this requires forking off a helper process because you cannot
just one-shot this using mount(2)
* Container runtimes in general need to fork into a container
before configuring its mounts, which can lead to security issues
in the case of shared-pidns containers (a privileged process in
the pidns can interact with your container runtime process)
While SUID_DUMP_DISABLE and user namespaces make this less of an
issue, the strict need for this due to a minor uAPI wart is kind
of unfortunate
Things would be much easier if there was a way for userspace to
just specify the pidns they want. So this pull request contains
changes to implement a new "pidns" argument which can be set
using fsconfig(2):
fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd);
fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0);
or classic mount(2) / mount(8):
// mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc
mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid");
Cleanups:
- Remove the last references to EXPORT_OP_ASYNC_LOCK
- Make file_remove_privs_flags() static
- Remove redundant __GFP_NOWARN when GFP_NOWAIT is used
- Use try_cmpxchg() in start_dir_add()
- Use try_cmpxchg() in sb_init_done_wq()
- Replace offsetof() with struct_size() in ioctl_file_dedupe_range()
- Remove vfs_ioctl() export
- Replace rwlock() with spinlock in epoll code as rwlock causes
priority inversion on preempt rt kernels
- Make ns_entries in fs/proc/namespaces const
- Use a switch() statement() in init_special_inode() just like we do
in may_open()
- Use struct_size() in dir_add() in the initramfs code
- Use str_plural() in rd_load_image()
- Replace strcpy() with strscpy() in find_link()
- Rename generic_delete_inode() to inode_just_drop() and
generic_drop_inode() to inode_generic_drop()
- Remove unused arguments from fcntl_{g,s}et_rw_hint()
Fixes:
- Document @name parameter for name_contains_dotdot() helper
- Fix spelling mistake
- Always return zero from replace_fd() instead of the file descriptor
number
- Limit the size for copy_file_range() in compat mode to prevent a
signed overflow
- Fix debugfs mount options not being applied
- Verify the inode mode when loading it from disk in minixfs
- Verify the inode mode when loading it from disk in cramfs
- Don't trigger automounts with RESOLVE_NO_XDEV
If openat2() was called with RESOLVE_NO_XDEV it didn't traverse
through automounts, but could still trigger them
- Add FL_RECLAIM flag to show_fl_flags() macro so it appears in
tracepoints
- Fix unused variable warning in rd_load_image() on s390
- Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD
- Use ns_capable_noaudit() when determining net sysctl permissions
- Don't call path_put() under namespace semaphore in listmount() and
statmount()"
* tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
fcntl: trim arguments
listmount: don't call path_put() under namespace semaphore
statmount: don't call path_put() under namespace semaphore
pid: use ns_capable_noaudit() when determining net sysctl permissions
fs: rename generic_delete_inode() and generic_drop_inode()
init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD
initramfs: Replace strcpy() with strscpy() in find_link()
initrd: Use str_plural() in rd_load_image()
initramfs: Use struct_size() helper to improve dir_add()
initrd: Fix unused variable warning in rd_load_image() on s390
fs: use the switch statement in init_special_inode()
fs/proc/namespaces: make ns_entries const
filelock: add FL_RECLAIM to show_fl_flags() macro
eventpoll: Replace rwlock with spinlock
selftests/proc: add tests for new pidns APIs
procfs: add "pidns" mount option
pidns: move is-ancestor logic to helper
openat2: don't trigger automounts with RESOLVE_NO_XDEV
namei: move cross-device check to __traverse_mounts
namei: remove LOOKUP_NO_XDEV check from handle_mounts
...
|
||
|
Matthieu Baerts (NGI0)
|
539f6b9de3 |
mptcp: pm: in-kernel: add laminar endpoints
Currently, upon the reception of an ADD_ADDR (and when the fullmesh flag is not used), the in-kernel PM will create new subflows using the local address the routing configuration will pick. It would be easier to pick local addresses from a selected list of endpoints, and use it only once, than relying on routing rules. Use case: both the client (C) and the server (S) have two addresses (a and b). The client establishes the connection between C(a) and S(a). Once established, the server announces its additional address S(b). Once received, the client connects to it using its second address C(b). Compared to a situation without the 'laminar' endpoint for C(b), the client didn't use this address C(b) to establish a subflow to the server's primary address S(a). So at the end, we have: C S C(a) --- S(a) C(b) --- S(b) In case of a 3rd address on each side (C(c) and S(c)), upon the reception of an ADD_ADDR with S(c), the client should not pick C(b) because it has already been used. C(c) should then be used. Note that this situation is currently possible if C doesn't add any endpoint, but configure the routing in order to pick C(b) for the route to S(b), and pick C(c) for the route to S(c). That doesn't sound very practical because it means knowing in advance the IP addresses that will be used and announced by the server. 'laminar', like the idea of laminar flows: the different subflows don't mix with each other on an endpoint, unlike the "turbulent" way traffic is mixed by 'fullmesh'. In the code, the new endpoint type is added. Similar to the other subflow types, an MPTCP_INFO counter is added. While at it, hole are now commented in struct mptcp_info, to remember next time that these holes can no longer be used. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/503 Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-15-ad126cc47c6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Matthieu Baerts (NGI0)
|
e7757b6d3a |
mptcp: pm: in-kernel: rename 'local_addr_max' to 'endp_subflow_max'
A few variables linked to the in-kernel Path-Manager are confusing, and it would help current and future developers, to clarify them. One of them is 'local_addr_max', which in fact represents the maximum number of 'subflow' endpoints that can be used to create new subflows, and not the number of local addresses that have been used to create subflows. While at it, add an additional name for the corresponding variable in MPTCP INFO: mptcpi_endp_subflow_max. Not to break the current uAPI, the new name is added as a 'define' pointing to the former name. This will then also help userspace devs. Also move the variable and function next to the other 'endp_X_max' ones. No functional changes intended. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-9-ad126cc47c6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Matthieu Baerts (NGI0)
|
37712d84df |
mptcp: pm: in-kernel: rename 'add_addr_accept_max' to 'limit_add_addr_accepted'
A few variables linked to the in-kernel Path-Manager are confusing, and it would help current and future developers, to clarify them. One of them is 'add_addr_accept_max', which in fact represents the limit of ADD_ADDR that can be accepted: the limit set via 'ip mptcp limit add_addr_accepted X' for example. It is not linked to the maximum number of accepted ADD_ADDR. While at it, add an additional name for the corresponding variable in MPTCP INFO: mptcpi_limit_add_addr_accepted. Not to break the current uAPI, the new name is added as a 'define' pointing to the former name. This will then also help userspace devs. No functional changes intended. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-8-ad126cc47c6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Matthieu Baerts (NGI0)
|
45cae57066 |
mptcp: pm: in-kernel: rename 'add_addr_signal_max' to 'endp_signal_max'
A few variables linked to the in-kernel Path-Manager are confusing, and it would help current and future developers, to clarify them. One of them is 'add_addr_signal_max', which in fact represents the maximum number of 'signal' endpoints that can be used to announced addresses, and not the number of ADD_ADDR that can be signalled. While at it, add an additional name for the corresponding variable in MPTCP INFO: mptcpi_endp_signal_max. Not to break the current uAPI, the new name is added as a 'define' pointing to the former name. This will then also help userspace devs. No functional changes intended. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-7-ad126cc47c6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Matthieu Baerts (NGI0)
|
3eb3c9a959 |
mptcp: pm: in-kernel: rename 'subflows_max' to 'limit_extra_subflows'
A few variables linked to the in-kernel Path-Manager are confusing, and it would help current and future developers, to clarify them. One of them is 'subflows_max', which in fact represents the limit of extra subflows: the limit set via 'ip mptcp limit subflows X' for example. It is not linked to the maximum number of created / possible subflows. While at it, add an additional name for the corresponding variable in MPTCP INFO: mptcpi_limit_extra_subflows. Not to break the current uAPI, the new name is added as a 'define' pointing to the former name. This will then also help userspace devs. No functional changes intended. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-6-ad126cc47c6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Matthieu Baerts (NGI0)
|
c5273f6ca1 |
mptcp: pm: rename 'subflows' to 'extra_subflows'
A few variables linked to the Path-Managers are confusing, and it would help current and future developers, to clarify them. One of them is 'subflows', which in fact represents the number of extra subflows: all the additional subflows created after the initial one, and not the total number of subflows. While at it, add an additional name for the corresponding variable in MPTCP INFO: mptcpi_extra_subflows. Not to break the current uAPI, the new name is added as a 'define' pointing to the former name. This will then also help userspace devs. No functional changes intended. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-5-ad126cc47c6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vadim Fedorenko
|
cc2f081299 |
ethtool: add FEC bins histogram report
IEEE 802.3ck-2022 defines counters for FEC bins and 802.3df-2024 clarifies it a bit further. Implement reporting interface through as addition to FEC stats available in ethtool. Drivers can leave bin counter uninitialized if per-lane values are provided. In this case the core will recalculate summ for the bin. Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Link: https://patch.msgid.link/20250924124037.1508846-2-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
bb9a242ce5 |
linux-can-next-for-6.18-20250924
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmjUChsTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnIpyB/90yOwkpWSGis1g+ijY5YL8DAkPb6x3
p8KWRQPVa3VsKWuPTZN0BWsVfxxwzJTUcsIDm2DdIrsSMU0B5fbFgxKl8zQO8Tsd
zHE5LrAR+q/GxKh6LbYHie6kUfq8k4kSP6qKn3OaNOywtxm9iQsgLLKbv7HEQvXv
Be84BDZWGiKDBRPyil8v3uXtvjTTxGWttqCO5wu+WQx1vJaQtxIh+zrWhB2GwHiJ
1gr4qT5clRLKDkCdy1Z3liCBnEX1cQ+Yekhkp97y6hIvxnQdP1ZamHfSm8CLOOyS
CNWgZM3Phl2arqkJl7RBBXw20zeH80H3PbBgVwrB637tq1XI9wiM7i2q
=JakB
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.18-20250924' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-09-25
this is a pull request of 48 patches for net-next/main, which
supersedes tags/linux-can-next-for-6.18-20250923.
The 1st patch is by Xichao Zhao and converts ns_to_ktime() to
us_to_ktime() in the m_can driver.
Vincent Mailhol contributes 2 patches: Updating the MAINTAINERS and
mailmap files to Vincent's new email address and sorting the includes
in the CAN helper library alphabeticaly.
Stéphane Grosjean's patch modifies all peak CAN drivers and the
mailmap to reflect Stéphane's new email address.
4 patches by Biju Das update the CAN-FD handling in the rcar_canfd
driver.
Followed by 11 patches by Geert Uytterhoeven updating and improving
the rcar_can driver.
Stefan Mätje contributes 2 patches for the esd_usb driver updating the
error messages.
The next 3 patch series are all by Vincent Mailhol: 3 patches to
optimize the size of struct raw_sock and struct uniqframe. 4 patches
which rework the CAN MTU logic as preparation for CAN-XL interfaces.
And finally 20 patches that prepare and refactor the CAN netlink code
for the upcoming CAN-XL support.
* tag 'linux-can-next-for-6.18-20250924' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (48 commits)
can: netlink: add userland error messages
can: dev: add can_get_ctrlmode_str()
can: calc_bittiming: make can_calc_tdco() FD agnostic
can: netlink: make can_tdc_fill_info() FD agnostic
can: netlink: add can_bitrate_const_fill_info()
can: netlink: add can_bittiming_const_fill_info()
can: netlink: add can_bittiming_fill_info()
can: netlink: add can_data_bittiming_get_size()
can: netlink: make can_tdc_get_size() FD agnostic
can: netlink: add can_ctrlmode_changelink()
can: netlink: add can_dtb_changelink()
can: netlink: make can_tdc_changelink() FD agnostic
can: netlink: remove useless check in can_tdc_changelink()
can: netlink: refactor CAN_CTRLMODE_TDC_{AUTO,MANUAL} flag reset logic
can: netlink: add can_validate_databittiming()
can: netlink: add can_validate_tdc()
can: netlink: refactor can_validate_bittiming()
can: netlink: document which symbols are FD specific
can: dev: make can_get_relative_tdco() FD agnostic and move it to bittiming.h
can: dev: move struct data_bittiming_params to linux/can/bittiming.h
...
====================
Link: https://patch.msgid.link/20250925121332.848157-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Jakub Kicinski
|
94aced6ed9 |
Quite a bit more things, including pull requests from drivers:
- mt76: MLO support, HW restart improvements
- rtw88/89: small features, prep for RTL8922DE support
- ath10k: GTK rekey fixes
- cfg80211/mac80211:
- additions for more NAN support
- S1G channel representation cleanup
-----BEGIN PGP SIGNATURE-----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=3HjM
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-09-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Quite a bit more things, including pull requests from drivers:
- mt76: MLO support, HW restart improvements
- rtw88/89: small features, prep for RTL8922DE support
- ath10k: GTK rekey fixes
- cfg80211/mac80211:
- additions for more NAN support
- S1G channel representation cleanup
* tag 'wireless-next-2025-09-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (167 commits)
wifi: libertas: add WQ_UNBOUND to alloc_workqueue users
Revert "wifi: libertas: WQ_PERCPU added to alloc_workqueue users"
wifi: libertas: WQ_PERCPU added to alloc_workqueue users
wifi: cfg80211: fix width unit in cfg80211_radio_chandef_valid()
wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again
wifi: ath12k: enforce CPU endian format for all QMI data
wifi: ath12k: Use 1KB Cache Flush Command for QoS TID Descriptors
wifi: ath12k: Fix flush cache failure during RX queue update
wifi: ath12k: Add Retry Mechanism for REO RX Queue Update Failures
wifi: ath12k: Refactor REO command to use ath12k_dp_rx_tid_rxq
wifi: ath12k: Refactor RX TID buffer cleanup into helper function
wifi: ath12k: Refactor RX TID deletion handling into helper function
wifi: ath12k: Increase DP_REO_CMD_RING_SIZE to 256
wifi: cfg80211: remove IEEE80211_CHAN_{1,2,4,8,16}MHZ flags
wifi: rtw89: avoid circular locking dependency in ser_state_run()
wifi: rtw89: fix leak in rtw89_core_send_nullfunc()
wifi: rtw89: avoid possible TX wait initialization race
wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait()
wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu()
wifi: mac80211: fix Rx packet handling when pubsta information is not available
...
====================
Link: https://patch.msgid.link/20250925232341.4544-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Theodore Ts'o
|
04a91570ac |
ext4: implemet new ioctls to set and get superblock parameters
Implement the EXT4_IOC_GET_TUNE_SB_PARAM and EXT4_IOC_SET_TUNE_SB_PARAM ioctls, which allow certains superblock parameters to be set while the file system is mounted, without needing write access to the block device. Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Message-ID: <20250916-tune2fs-v2-3-d594dc7486f0@mit.edu> Signed-off-by: Theodore Ts'o <tytso@mit.edu> |
||
|
Jakub Kicinski
|
203e3beb73 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.17-rc8).
Conflicts:
drivers/net/can/spi/hi311x.c
6b6968084721 ("can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled")
27ce71e1ce81 ("net: WQ_PERCPU added to alloc_workqueue users")
https://lore.kernel.org/72ce7599-1b5b-464a-a5de-228ff9724701@kernel.org
net/smc/smc_loopback.c
drivers/dibs/dibs_loopback.c
a35c04de2565 ("net/smc: fix warning in smc_rx_splice() when calling get_page()")
cc21191b584c ("dibs: Move data path to dibs layer")
https://lore.kernel.org/74368a5c-48ac-4f8e-a198-40ec1ed3cf5f@kernel.org
Adjacent changes:
drivers/net/dsa/lantiq/lantiq_gswip.c
c0054b25e2f1 ("net: dsa: lantiq_gswip: move gswip_add_single_port_br() call to port_setup()")
7a1eaef0a791 ("net: dsa: lantiq_gswip: support model-specific mac_select_pcs()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Linus Torvalds
|
4ff71af020 |
Including fixes from Bluetooth, IPsec and CAN.
No known regressions at this point.
Current release - regressions:
- xfrm: xfrm_alloc_spi shouldn't use 0 as SPI
Previous releases - regressions:
- xfrm: fix offloading of cross-family tunnels
- bluetooth: fix several races leading to UaFs
- dsa: lantiq_gswip: fix FDB entries creation for the CPU port
- eth: tun: update napi->skb after XDP process
- eth: mlx: fix UAF in flow counter release
Previous releases - always broken:
- core: forbid FDB status change while nexthop is in a group
- smc: fix warning in smc_rx_splice() when calling get_page()
- can: provide missing ndo_change_mtu(), to prevent buffer overflow.
- eth: i40e: fix VF config validation
- eth: broadcom: fix support for PTP_EXTTS_REQUEST2 ioctl
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=M0Pd
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth, IPsec and CAN.
No known regressions at this point.
Current release - regressions:
- xfrm: xfrm_alloc_spi shouldn't use 0 as SPI
Previous releases - regressions:
- xfrm: fix offloading of cross-family tunnels
- bluetooth: fix several races leading to UaFs
- dsa: lantiq_gswip: fix FDB entries creation for the CPU port
- eth:
- tun: update napi->skb after XDP process
- mlx: fix UAF in flow counter release
Previous releases - always broken:
- core: forbid FDB status change while nexthop is in a group
- smc: fix warning in smc_rx_splice() when calling get_page()
- can: provide missing ndo_change_mtu(), to prevent buffer overflow.
- eth:
- i40e: fix VF config validation
- broadcom: fix support for PTP_EXTTS_REQUEST2 ioctl"
* tag 'net-6.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
octeontx2-pf: Fix potential use after free in otx2_tc_add_flow()
net: dsa: lantiq_gswip: suppress -EINVAL errors for bridge FDB entries added to the CPU port
net: dsa: lantiq_gswip: move gswip_add_single_port_br() call to port_setup()
libie: fix string names for AQ error codes
net/mlx5e: Fix missing FEC RS stats for RS_544_514_INTERLEAVED_QUAD
net/mlx5: HWS, ignore flow level for multi-dest table
net/mlx5: fs, fix UAF in flow counter release
selftests: fib_nexthops: Add test cases for FDB status change
selftests: fib_nexthops: Fix creation of non-FDB nexthops
nexthop: Forbid FDB status change while nexthop is in a group
net: allow alloc_skb_with_frags() to use MAX_SKB_FRAGS
bnxt_en: correct offset handling for IPv6 destination address
ptp: document behavior of PTP_STRICT_FLAGS
broadcom: fix support for PTP_EXTTS_REQUEST2 ioctl
broadcom: fix support for PTP_PEROUT_DUTY_CYCLE
Bluetooth: MGMT: Fix possible UAFs
Bluetooth: hci_event: Fix UAF in hci_acl_create_conn_sync
Bluetooth: hci_event: Fix UAF in hci_conn_tx_dequeue
Bluetooth: hci_sync: Fix hci_resume_advertising_sync
Bluetooth: Fix build after header cleanup
...
|