This validates the previous commit: the userspace can set unknown flags
-- the 7th bit is currently unused -- without errors, but only the
supported ones are printed in the endpoints dumps.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-2-9e4781a6c1b8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.18-rc7).
No conflicts, adjacent changes:
tools/testing/selftests/net/af_unix/Makefile
e1bb28bf13f4 ("selftest: af_unix: Add test for SO_PEEK_OFF.")
45a1cd8346ca ("selftests: af_unix: Add tests for ECONNRESET and EOF semantics")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous patch fixed an issue with the 'add_addr_accepted' counter.
This was not spot by the test suite.
Check this counter and 'add_addr_signal' in MPTCP Join 'delete re-add
signal' test. This should help spotting similar regressions later on.
These counters are crucial for ensuring the MPTCP path manager correctly
handles the subflow creation via 'ADD_ADDR'.
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-11-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all userspace tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 290493078b96 ("selftests: mptcp: join: userspace: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-9-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some endpoints
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all endpoints tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 6457595db987 ("selftests: mptcp: join: endpoints: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-8-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After recent fixes like the parent commit, and "selftests: mptcp:
connect: trunc: read all recv data", the two fastclose subtests no
longer look flaky any more.
It then feels fine to remove these flaky marks, to no longer ignore
these subtests in case of errors.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-7-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, some debugging happened around a test that was timing out. The
stats were showing connections being closed which was confusing because
the closing state was caused by the timeout stopping the transfer.
To avoid such confusion, the timeout is no longer done per mptcp_connect
process, but separately. In case of timeout, the stats are now printed,
then the apps are killed.
The stats will still be printed after the kill, but that's fine, and
this might even be useful, just in case. Timeout should be exceptional.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-8-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After having started mptcp_connect in listening mode,
'mptcp_lib_wait_local_port_listen' can be used to wait for the listening
socket to be ready.
This is better than using the 'sleep' command, not to pause for a fixed
amount of time, but waiting for an event. This helper is used in all
other MPTCP selftests, but not in these two.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-7-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the same netns is used for the listener and the connector, no need
to take exactly the same packet trace twice, one is enough.
This avoids confusions when the traces are the same, and wasting
resources which might not help reproducing an issue.
While at it, avoid long lines and double spaces now that these lines are
no longer aligned.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-6-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before, 'nstat' was used to retrieve each individual counter: this means
querying 4 different sources from /proc/net and iterating over 100+
counters each time. Instead, the stats could be retrieved once, and the
output file could be parsed for each counter. Even better, such file is
already present: the nstat history file.
To be able to get this working, the nstat history file also needs to
contains zero counters too, so it is still possible to know if a counter
is missing or set to 0.
This also simplifies mptcp_connect.sh: instead of checking multiple
counters before and after a test to compute the difference, the stats
history files can be reset before each test, and nstat can display only
the difference.
mptcp_lib_get_counter() continues to work when no history file is
available: by fetching nstat directly, like before. This is the case in
diag.sh and userspace_pm.sh where there is no need to save the history
file. This is also the case in mptcp_join.sh, when 'run_tests' is
executed in the background: easier to continue fetching counters than
updating the history each time it is needed.
Note: 'nstat' is called with '-s' in mptcp_lib_nstat_get(), so this
helper can be called multiple times during the test if needed.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-5-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of errors, dump the stats from history instead of using nstat.
There are multiple advantages to that:
- The same filters from pr_err_stats are used, e.g. the unused 'rate'
column is not displayed.
- The counters are closer to the ones from when the test stopped.
- While at it, the errors can be better presented: error colours, a
small indentation to distinguish the different parts, extra new lines.
Even if it should only happen in rare cases -- internal errors, or netns
issues -- if no history is available, 'nstat' is used like before, just
in case.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-4-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the MPTCP selftests, the nstat daemon is not used. It means that
the last column (the rate) is always 0.0, and that's not something
interesting to display.
Then, this last column can be filtered out.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-3-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that these files are written from MPTCP lib helpers, the stats file
paths are uniformed. Then, no need to specify them from the each
selftest.
No behavioural changes intended.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-2-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These new helpers are easier to read than the long and multi lines
commands. Plus it will ease the addition of new features related to that
in the next commits.
No behavioural changes intended.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-1-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.18-rc6).
No conflicts, adjacent changes in:
drivers/net/phy/micrel.c
96a9178a29a6 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface")
61b7ade9ba8c ("net: phy: micrel: Add support for non PTP SKUs for lan8814")
and a trivial one in tools/testing/selftests/drivers/net/Makefile.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'run_tests' function is executed in the background, but killing its
associated PID would not kill the children tasks running in the
background.
To properly kill all background tasks, 'kill -- -PID' could be used, but
this requires kill from procps-ng. Instead, all children tasks are
listed using 'ps', and 'kill' is called with all PIDs of this group.
Fixes: 31ee4ad86afd ("selftests: mptcp: join: stop transfer when check is done (part 1)")
Cc: stable@vger.kernel.org
Fixes: 04b57c9e096a ("selftests: mptcp: join: stop transfer when check is done (part 2)")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-6-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPTCP Join "fastclose server" selftest is sometimes failing because the
client output file doesn't have the expected size, e.g. 296B instead of
1024B.
When looking at a packet trace when this happens, the server sent the
expected 1024B in two parts -- 100B, then 924B -- then the MP_FASTCLOSE.
It is then strange to see the client only receiving 296B, which would
mean it only got a part of the second packet. The problem is then not on
the networking side, but rather on the data reception side.
When mptcp_connect is launched with '-f -1', it means the connection
might stop before having sent everything, because a reset has been
received. When this happens, the program was directly stopped. But it is
also possible there are still some data to read, simply because the
previous 'read' step was done with a buffer smaller than the pending
data, see do_rnd_read(). In this case, it is important to read what's
left in the kernel buffers before stopping without error like before.
SIGPIPE is now ignored, not to quit the app before having read
everything.
Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-5-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to make the
connection longer. This connection will be killed at the end, after the
verifications, so making it longer doesn't change anything, apart from
avoid it to end before the end of the verifications
To play it safe, all userspace tests not waiting for the end of the
transfer are now sharing a longer file (128KB) at slow speed.
Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow")
Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow")
Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-4-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to make the
connection longer. This connection will be killed at the end, after the
verifications, so making it longer doesn't change anything, apart from
avoid it to end before the end of the verifications
To play it safe, all endpoints tests not waiting for the end of the
transfer are now sharing a longer file (128KB) at slow speed.
Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases")
Fixes: b5e2fb832f48 ("selftests: mptcp: add explicit test case for remove/readd")
Fixes: e06959e9eebd ("selftests: mptcp: join: test for flush/re-add endpoints")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-3-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some of these 'remove' tests rarely fail because a subflow has been
reset instead of cleanly removed. This can happen when one extra subflow
which has never carried data is being closed (FIN) on one side, while
the other is sending data for the first time.
To avoid such subflows to be used right at the end, the backup flag has
been added. With that, data will be only carried on the initial subflow.
Fixes: d2c4333a801c ("selftests: mptcp: add testcases for removing addrs")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-2-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "fallback due to TCP OoO" was never printed because the stat_ooo_now
variable was checked twice: once in the parent if-statement, and one in
the child one. The second condition was then always true then, and the
'else' branch was never taken.
The idea is that when there are more ACK + MP_CAPABLE than expected, the
test either fails if there was no out of order packets, or a notice is
printed.
Fixes: 69ca3d29a755 ("mptcp: update selftest for fallback due to OoO")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-1-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By design, an MPTCP connection will not accept extra subflows where no
MPTCP listening sockets can accept such requests.
In other words, it means that if the 'server' listens on a specific
address / device, it cannot accept MP_JOIN sent to a different address /
device. Except if there is another MPTCP listening socket accepting
them.
This is what the new tests are validating:
- Forcing a bind on the main v4/v6 address, and checking that MP_JOIN
to announced addresses are not accepted.
- Also forcing a bind on the main v4/v6 address, but before, another
listening socket is created to accept additional subflows. Note that
'mptcpize run nc -l' -- or something else only doing: socket(MPTCP),
bind(<IP>), listen(0) -- would be enough, but here mptcp_connect is
reused not to depend on another tool just for that.
- Same as the previous one, but using v6 link-local addresses: this is
a bit particular because it is required to specify the outgoing
network interface when connecting to a link-local address announced
by the other peer. When using the routing rules, this doesn't work
(the outgoing interface is not known) ; but it does work with a
'laminar' endpoint having a specified interface.
Note that extra small modifications are needed for these tests to work:
- mptcp_connect's check_getpeername_connect() check should strip the
specified interface when comparing addresses.
- With IPv6 link-local addresses, it is required to wait for them to
be ready (no longer in 'tentative' mode) before using them, otherwise
the bind() will not be allowed.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/591
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-4-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same extra long commands are present twice, with small differences:
the variable for the stdin file is different.
Use new dedicated variables in one command to avoid this code
duplication.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-3-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Our documentation is saying that the in-kernel PM is only using fullmesh
endpoints to establish subflows to announced addresses when at least one
endpoint has a fullmesh flag. But this was not totally correct: only
fullmesh endpoints were used if at least one endpoint *from the same
address family as the received ADD_ADDR* has the fullmesh flag.
This is confusing, and it seems clearer not to have differences
depending on the address family.
So, now, when at least one MPTCP endpoint has a fullmesh flag, the local
addresses are picked from all fullmesh endpoints, which might be 0 if
there are no endpoints for the correct address family.
One selftest needs to be adapted for this behaviour change.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-2-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: c912f935a5c7 ("selftests: mptcp: join: validate new laminar endp")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-5-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: b5e2fb832f48 ("selftests: mptcp: add explicit test case for remove/readd")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-4-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: 36c4127ae8dd ("selftests: mptcp: join: skip implicit tests if not supported")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-3-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: e06959e9eebd ("selftests: mptcp: join: test for flush/re-add endpoints")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-2-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We get a significant number of conflicts between net and net-next
because of selftests Makefile changes. People tend to append new
test cases at the end of the Makefile when there's no clear sort
order. Sort all networking selftests Makefiles, use the following
format:
VAR_NAME := \
entry1 \
entry2 \
entry3 \
# end of VAR_NAME
Some Makefiles are already pretty close to this.
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251003210127.1021918-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sort config files for networking selftests. This should help us
avoid merge conflicts between net and net-next. patchwork check
will be added to prevent new issues.
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20251003205736.1019673-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here are a few sub-tests for mptcp_join.sh, validating the new 'laminar'
endpoint type.
In a setup where subflows created using the routing rules would be
rejected by the listener, and where the latter announces one IP address,
some cases are verified:
- Without any 'laminar' endpoints: no new subflows are created.
- With one 'laminar' endpoint: a second subflow is created.
- With multiple 'laminar' endpoints: 2 IPv4 subflows are created.
- With one 'laminar' endpoint, but the server announcing a second IP
address, only one subflow is created.
- With one 'laminar' + 'subflow' endpoint, the same endpoint is only
used once.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-8-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous commit adds an exception for the C-flag case. The
'mptcp_join.sh' selftest is extended to validate this case.
In this subtest, there is a typical CDN deployment with a client where
MPTCP endpoints have been 'automatically' configured:
- the server set net.mptcp.allow_join_initial_addr_port=0
- the client has multiple 'subflow' endpoints, and the default limits:
not accepting ADD_ADDRs.
Without the parent patch, the client is not able to establish new
subflows using its 'subflow' endpoints. The parent commit fixes that.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: df377be38725 ("mptcp: add deny_join_id0 in mptcp_options_received")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-2-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
server-side info linked to the MPTCP connect/established events can now
come from the flags, in addition to the dedicated attribute.
The attribute is now deprecated -- in favour of the new flag, and will
be removed later on.
Print this info only once.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250919-net-next-mptcp-server-side-flag-v1-4-a97a5d561a8b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This attribute is a boolean. No need to add it to set it to 'false'.
Indeed, the default value when this attribute is not set is naturally
'false'. A few bytes can then be saved by not adding this attribute if
the connection is not on the server side.
This prepares the future deprecation of its attribute, in favour of a
new flag.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250919-net-next-mptcp-server-side-flag-v1-1-a97a5d561a8b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.17-rc7).
No conflicts.
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
9536fbe10c9d ("net/mlx5e: Add PSP steering in local NIC RX")
7601a0a46216 ("net/mlx5e: Add a miss level for ipsec crypto offload")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The client-side function connect_one_server() properly closes its IPC
descriptor after use, but the server-side code in both mptcp_sockopt.c
and mptcp_inq.c was missing corresponding close() calls for their IPC
descriptors, leaving file descriptors open unnecessarily.
This change ensures proper cleanup by:
1. Adding missing close(pipefds[0]/unixfds[0]) in server processes
2. Adding close(pipefds[1]/unixfds[1]) after server() function calls
This ensures both ends of the IPC pipe are properly closed in their
respective processes, preventing file descriptor leaks.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-next-mptcp-minor-fixes-6-18-v1-2-99d179b483ad@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The server file descriptor ('fd') is opened in server() but never closed.
While accepted connections are properly closed in process_one_client(),
the main listening socket remains open, causing a resource leak.
This patch ensures the server fd is properly closed after processing
clients, bringing the sockopt and inq test cases in line with proper
resource cleanup practices.
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-next-mptcp-minor-fixes-6-18-v1-1-99d179b483ad@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes several issues in the error reporting of the MPTCP sockopt
selftest:
1. Fix diff not printed: The error messages for counter mismatches had
the actual difference ('diff') as argument, but it was missing in the
format string. Displaying it makes the debugging easier.
2. Fix variable usage: The error check for 'mptcpi_bytes_acked' incorrectly
used 'ret2' (sent bytes) for both the expected value and the difference
calculation. It now correctly uses 'ret' (received bytes), which is the
expected value for bytes_acked.
3. Fix off-by-one in diff: The calculation for the 'mptcpi_rcv_delta' diff
was 's.mptcpi_rcv_delta - ret', which is off-by-one. It has been
corrected to 's.mptcpi_rcv_delta - (ret + 1)' to match the expected
value in the condition above it.
Fixes: 5dcff89e1455 ("selftests: mptcp: explicitly tests aggregate counters")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-5-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous commit adds the MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 flag. Make
sure it is correctly announced by the other peer when it has been
received.
pm_nl_ctl will now display 'deny_join_id0:1' when monitoring the events,
and when this flag was set by the other peer.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-3-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To be able to find which capture files have been produced after several
runs.
This prefix was not printed anywhere before.
While at it, always use the same prefix by taking info from ns1, instead
of "$connector_ns", which is sometimes ns1, sometimes ns2 in the
subtests.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-5-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is better than printing random bytes in the terminal.
Note that Jakub suggested 'hexdump', but Mat found out this tool is not
often installed by default. 'od' can do a similar job, and it is in the
POSIX specs and available in coreutils, so it should be on more systems.
While at it, display a few more bytes, just to fill in the two lines.
And no need to display the 3rd only line showing the next number of
bytes: 0000040.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-4-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The disconnect test-case, with 'plain' TCP sockets generates spurious
errors, e.g.
07 ns1 TCP -> ns1 (dead:beef:1::1:10006) MPTCP
read: Connection reset by peer
read: Connection reset by peer
(duration 155ms) [FAIL] client exit code 3, server 3
netns ns1-FloSdv (listener) socket stat for 10006:
TcpActiveOpens 2 0.0
TcpPassiveOpens 2 0.0
TcpEstabResets 2 0.0
TcpInSegs 274 0.0
TcpOutSegs 276 0.0
TcpOutRsts 3 0.0
TcpExtPruneCalled 2 0.0
TcpExtRcvPruned 1 0.0
TcpExtTCPPureAcks 104 0.0
TcpExtTCPRcvCollapsed 2 0.0
TcpExtTCPBacklogCoalesce 42 0.0
TcpExtTCPRcvCoalesce 43 0.0
TcpExtTCPChallengeACK 1 0.0
TcpExtTCPFromZeroWindowAdv 42 0.0
TcpExtTCPToZeroWindowAdv 41 0.0
TcpExtTCPWantZeroWindowAdv 13 0.0
TcpExtTCPOrigDataSent 164 0.0
TcpExtTCPDelivered 165 0.0
TcpExtTCPRcvQDrop 1 0.0
In the failing scenarios (TCP -> MPTCP), the involved sockets are
actually plain TCP ones, as fallbacks for passive sockets at 2WHS time
cause the MPTCP listeners to actually create 'plain' TCP sockets.
Similar to commit 218cc166321f ("selftests: mptcp: avoid spurious errors
on disconnect"), the root cause is in the user-space bits: the test
program tries to disconnect as soon as all the pending data has been
spooled, generating an RST. If such option reaches the peer before the
connection has reached the closed status, the TCP socket will report an
error to the user-space, as per protocol specification, causing the
above failure. Note that it looks like this issue got more visible since
the "tcp: receiver changes" series from commit 06baf9bfa6ca ("Merge
branch 'tcp-receiver-changes'").
Address the issue by explicitly waiting for the TCP sockets (-t) to
reach a closed status before performing the disconnect. More precisely,
the test program now waits for plain TCP sockets or TCP subflows in
addition to the MPTCP sockets that were already monitored.
While at it, use 'ss' with '-n' to avoid resolving service names, which
is not needed here.
Fixes: 218cc166321f ("selftests: mptcp: avoid spurious errors on disconnect")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-3-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IO errors were correctly printed to stderr, and propagated up to the
main loop for the server side, but the returned value was ignored. As a
consequence, the program for the listener side was no longer exiting
with an error code in case of IO issues.
Because of that, some issues might not have been seen. But very likely,
most issues either had an effect on the client side, or the file
transfer was not the expected one, e.g. the connection got reset before
the end. Still, it is better to fix this.
The main consequence of this issue is the error that was reported by the
selftests: the received and sent files were different, and the MIB
counters were not printed. Also, when such errors happened during the
'disconnect' tests, the program tried to continue until the timeout.
Now when an IO error is detected, the program exits directly with an
error.
Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-2-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.17-rc6).
Conflicts:
net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipapo_avx2.c
c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
84c1da7b38d9 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too")
Only trivial adjacent changes (in a doc and a Makefile).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When many ADD_ADDR need to be sent, it can take some time to send each
of them, and create new subflows. Some CIs seem to occasionally have
issues with these tests, especially with "debug" kernels.
Two subtests will now run for a slightly longer time: the last two where
3 or more ADD_ADDR are sent during the test.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250907-net-next-mptcp-add_addr-retrans-adapt-v1-3-824cc805772b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ADD_ADDR can be retransmitted, and with, the parent commit, these
retransmissions can be sent quicker: from 2 minutes to less than one
second.
To avoid false positives where retransmitted ADD_ADDR causes higher
counters than expected, it is required to be more tolerant. Errors are
now only reported when fewer ADD_ADDRs have been sent/received, except
if no ADD_ADDR are expected.
Before the parent commit, the tolerance was present for each tests where
the ADD_ADDR could be retransmitted in a reasonable time (1 sec). Now
that all tests can have retransmitted ADD_ADDR, it is normal to apply
the same tolerance for all tests.
An alternative could be to disable the ADD_ADDR retransmissions by
default, but that's changing the default kernel behaviour. Plus,
ADD_ADDR retransmissions can be required for some tests. To avoid adding
exceptions to many tests, it seems better to increase the tolerance.
Later, we could add a new MIB counter to identify the ADD_ADDR
retransmissions, and remove the tolerance when this counter is
available.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250907-net-next-mptcp-add_addr-retrans-adapt-v1-2-824cc805772b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This v0.11.0 version introduces SC2329:
Warn when (non-escaping) functions are never invoked.
Except that, similar to SC2317, ShellCheck is currently unable to figure
out functions that are invoked via trap, or indirectly, when calling
functions via variables. It is then needed to disable this new SC2329.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250908-net-mptcp-misc-fixes-6-17-rc5-v1-3-5f2168a66079@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GCC was complaining about the new label:
mptcp_inq.c:79:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
79 | int err = getaddrinfo(node, service, hints, res);
| ^
mptcp_sockopt.c:166:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
166 | int err = getaddrinfo(node, service, hints, res);
| ^
Simply declare 'err' before the label to avoid this warning.
Fixes: dd367e81b79a ("selftests: mptcp: sockopt: use IPPROTO_MPTCP for getaddrinfo")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-8-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GCC was complaining about the new label:
mptcp_connect.c:187:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
187 | int err = getaddrinfo(node, service, hints, res);
| ^
Simply declare 'err' before the label to avoid this warning.
Fixes: a862771d1aa4 ("selftests: mptcp: use IPPROTO_MPTCP for getaddrinfo")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-7-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
