- a number of conversions to yaml/json schema and fixes for
input-related device tree bindings
- a new driver for Awinic AW86927 haptic chip
- a new driver for Hynitron CST816x series controller
- a new driver for add Himax HX852x(ES) touchscreen controller
- a fix to uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- a fix to prevent overflow in pressure calculation in tsc2007 driver
causing phantom touches
- a change to Atmel maxTouch driver to support generic touchscreen
configuration (flip, rotate, etc.)
- support for platform data was dropped in tca8418_keypad,
pxa27x-keypad, spear-keyboard and twl4030_keypad drivers, they all
now rely on generic device properties for configuration
- other assorted changes and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaOX1HQAKCRBAj56VGEWX
nC29AQCsDm6HBKXJZl6nAI8WHQiSvASFvyFlF6scVnfueX54mQEA6eE428+Cr1Sn
mDiwL38Es+PlZbdsi0J2q0vYzpr4yQU=
=JZIn
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Conversions to yaml/json schema and fixes for input-related device
tree bindings
- New drivers:
- Awinic AW86927 haptic chip
- Hynitron CST816x series controller
- Himax HX852x(ES) touchscreen controller
- Fix uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- Prevent overflow in pressure calculation in tsc2007 driver causing
phantom touches
- Make the Atmel maxTouch driver support generic touchscreen
configuration (flip, rotate, etc)
- Drop support for platform data in tca8418_keypad, pxa27x-keypad,
spear-keyboard and twl4030_keypad drivers, they all now rely on
generic device properties for configuration
- Other assorted changes and fixes
* tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
Input: atmel_mxt_ts - allow reset GPIO to sleep
Input: aw86927 - fix error code in probe()
Input: psxpad-spi - add a check for the return value of spi_setup()
Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak
Input: aw86927 - add driver for Awinic AW86927
dt-bindings: input: Add Awinic AW86927
dt-bindings: touchscreen: remove touchscreen.txt
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node
dt-bindings: touchscreen: convert eeti bindings to json schema
Input: pm8941-pwrkey - disable wakeup for resin by default
dt-bindings: input: pm8941-pwrkey: Document wakeup-source property
Input: add driver for Hynitron CST816x series
dt-bindings: input: touchscreen: add hynitron cst816x series
Input: imx6ul_tsc - set glitch threshold by DTS property
dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold
dt-bindings: touchscreen: add debounce-delay-us property
Input: ps2-gpio - fix typo
Input: atmel_mxt_ts - add support for generic touchscreen configurations
dt-bindings: input: maxtouch: add common touchscreen properties
dt-bindings: touchscreen: convert zet6223 bindings to json schema
...
The reset GPIO is not toggled in any critical section where it couldn't
sleep, allow the reset GPIO to sleep. This allows the driver to operate
reset GPIOs connected to I2C GPIO expanders.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://lore.kernel.org/r/20251005023335.166483-1-marek.vasut@mailbox.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmjkpakTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXip5B/48MvTFJ1qwRGPVzevZQ8Z4SDogEREp
69VS/xRf1YCIzyXyanwqf1dXLq8NAqicSp6ewpJAmNA55/9O0cwT2EtohjeGCu61
krPIvS3KT7xI0uSEniBdhBtALYBscnQ0e3cAbLNzL7bwA6Q6OmvoIawpBADgE/cW
aZNCK9jy+WUqtXc6lNtkJtST0HWGDn0h04o2hjqIkZ+7ewjuEEJBUUB/JZwJ41Od
UxbID0PAcn9O4n/u/Y/GH65MX+ddrdCgPHEGCLAGAKT24lou3NzVv445OuCw0c4W
ilALIRb9iea56ZLVBW5O82+7g9Ag41LGq+841MNlZjeRNONGykaUpTWZ
=OR26
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Unify guest entry code for KVM and MSHV (Sean Christopherson)
- Switch Hyper-V MSI domain to use msi_create_parent_irq_domain()
(Nam Cao)
- Add CONFIG_HYPERV_VMBUS and limit the semantics of CONFIG_HYPERV
(Mukesh Rathor)
- Add kexec/kdump support on Azure CVMs (Vitaly Kuznetsov)
- Deprecate hyperv_fb in favor of Hyper-V DRM driver (Prasanna
Kumar T S M)
- Miscellaneous enhancements, fixes and cleanups (Abhishek Tiwari,
Alok Tiwari, Nuno Das Neves, Wei Liu, Roman Kisel, Michael Kelley)
* tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hyperv: Remove the spurious null directive line
MAINTAINERS: Mark hyperv_fb driver Obsolete
fbdev/hyperv_fb: deprecate this in favor of Hyper-V DRM driver
Drivers: hv: Make CONFIG_HYPERV bool
Drivers: hv: Add CONFIG_HYPERV_VMBUS option
Drivers: hv: vmbus: Fix typos in vmbus_drv.c
Drivers: hv: vmbus: Fix sysfs output format for ring buffer index
Drivers: hv: vmbus: Clean up sscanf format specifier in target_cpu_store()
x86/hyperv: Switch to msi_create_parent_irq_domain()
mshv: Use common "entry virt" APIs to do work in root before running guest
entry: Rename "kvm" entry code assets to "virt" to genericize APIs
entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper
mshv: Handle NEED_RESCHED_LAZY before transferring to guest
x86/hyperv: Add kexec/kdump support on Azure CVMs
Drivers: hv: Simplify data structures for VMBus channel close message
Drivers: hv: util: Cosmetic changes for hv_utils_transport.c
mshv: Add support for a new parent partition configuration
clocksource: hyper-v: Skip unnecessary checks for the root partition
hyperv: Add missing field to hv_output_map_device_interrupt
-----BEGIN PGP SIGNATURE-----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=8Nwa
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- haptic touchpad support (Angela Czubak and Jonathan Denose)
- support for audio jack handling on DualSense Playstation controllers
(Cristian Ciocaltea)
- allow HID-BPF to rebind a driver to hid-multitouch (Benjamin
Tissoires)
- rework hidraw ioctls to make them safer (and tested) (Benjamin
Tissoires)
- various PIDFF and universal-PIDFF fixes/improvements (Tomasz Pakuła)
- better configuration of Intel QuickI2C through ACPI (Xinpeng Sun)
- other assorted cleanups and fixes
* tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (58 commits)
HID: playstation: Switch to scoped_guard() in {dualsense|dualshock4}_output_worker()
HID: playstation: Silence sparse warnings for locking context imbalances
HID: playstation: Update SP preamp gain comment line
HID: intel-thc-hid: intel-quicki2c: support ACPI config for advanced features
HID: core: Change hid_driver to use a const char* for name
HID: hidraw: tighten ioctl command parsing
selftests/hid: hidraw: forge wrong ioctls and tests them
selftests/hid: hidraw: add more coverage for hidraw ioctls
selftests/hid: update vmtest.sh for virtme-ng
HID: playstation: Support DualSense audio jack event reporting
HID: playstation: Support DualSense audio jack hotplug detection
HID: playstation: Redefine DualSense input report status field
HID: playstation: Prefer kzalloc(sizeof(*buf)...)
HID: playstation: Document spinlock_t usage
HID: playstation: Fix all alignment and line length issues
HID: playstation: Correct spelling in comment sections
HID: playstation: Replace uint{32,16,8}_t with u{32,16,8}
HID: playstation: Simplify locking with guard() and scoped_guard()
HID: playstation: Add spaces around arithmetic operators
HID: playstation: Make use of bitfield macros
...
This round of updates contains a fair amount of new device support, a couple of fixes and
some refactoring. The most notable additions include new drivers for Loongson's Security
Engine, RNG and TPM, new drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a refactoring to use a more modern
GPIO API for the VEXPRESS sysreg driver, the removal of a deprecated IRQ ACK function from the
MC13xxx RTC driver and a new DT binding for the aforementioned TI BQ257xx charger.
New Support & Features
- Add a suite of drivers for the Loongson Security Engine, including the core controller, a
Random Number Generator (RNG) and Trusted Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including the input driver, MFD
cell registration, and a system power-off handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs, including the core MFD
driver and a power supply driver for the charger functionality.
Improvements & Fixes
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS sysreg driver to prevent
potential silent failures.
Cleanups & Refactoring
- Add a MAINTAINERS entry for the new Loongson Security Engine drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO chip API.
Removals
- Remove the deprecated and unused mc13xxx_irq_ack() function from the MC13xxx RTC, input and
touchscreen drivers.
Device Tree Bindings Updates
- Add device tree bindings for the TI BQ25703A charger.
-----BEGIN PGP SIGNATURE-----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=h21C
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"This round of updates contains a fair amount of new device support, a
couple of fixes and some refactoring. The most notable additions
include new drivers for Loongson's Security Engine, RNG and TPM, new
drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a
refactoring to use a more modern GPIO API for the VEXPRESS sysreg
driver, the removal of a deprecated IRQ ACK function from the MC13xxx
RTC driver and a new DT binding for the aforementioned TI BQ257xx
charger.
New Support & Features:
- Add a suite of drivers for the Loongson Security Engine, including
the core controller, a Random Number Generator (RNG) and Trusted
Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including
the input driver, MFD cell registration, and a system power-off
handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs,
including the core MFD driver and a power supply driver for the
charger functionality.
Improvements & Fixes:
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS
sysreg driver to prevent potential silent failures.
Cleanups & Refactoring:
- Add a MAINTAINERS entry for the new Loongson Security Engine
drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO
chip API.
Removals:
- Remove the deprecated and unused mc13xxx_irq_ack() function from
the MC13xxx RTC, input and touchscreen drivers.
Device Tree Bindings Updates:
- Add device tree bindings for the TI BQ25703A charger"
* tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
mfd: simple-mfd-i2c: Add compatible string for LX2160ARDB
mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order
dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
dt-bindings: watchdog: Add SMARC-sAM67 support
dt-bindings: mfd: tps6594: Allow gpio-line-names
mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs
mfd: 88pm886: Add GPADC cell
mfd: vexpress-sysreg: Use more common syntax for compound literals
mfd: rz-mtu3: Fix MTU5 NFCR register offset
mfd: max77705: Setup the core driver as an interrupt controller
mfd: cs42l43: Remove IRQ masking in suspend
mfd: cs42l43: Move IRQ enable/disable to encompass force suspend
mfd: ls2kbmc: Add Loongson-2K BMC reset function support
mfd: ls2kbmc: Introduce Loongson-2K BMC core driver
mfd: bd71828, bd71815: Prepare for power-supply support
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
dt-bindings: mfd: fsl,mc13xxx: Add buttons node
dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema
mfd: macsmc: Add "apple,t8103-smc" compatible
...
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder API
to other in-kernel users (to enable merging of a new pinctrl driver
that uses it)
- convert all remaining drivers to using the modernized generic GPIO chip
API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve its
support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO drivers
that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled with
COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding
-----BEGIN PGP SIGNATURE-----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=TZ1G
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and support for more models in existing
ones.
The generic GPIO API has been reworked and all users converted
which allowed us to move the fields specific to the generic GPIO
implementation out of the high-level struct gpio_chip into its own
structure that wraps the gpio_chip.
Other than that, there's nothing too exciting. Mostly minor tweaks and
fixes all over the place, some refactoring and some small new features
in helper modules.
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and
pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder
API to other in-kernel users (to enable merging of a new pinctrl
driver that uses it)
- convert all remaining drivers to using the modernized generic GPIO
chip API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve
its support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO
drivers that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better
readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled
with COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding"
* tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (122 commits)
gpio: mpfs: fix setting gpio direction to output
gpio: generic: move GPIO_GENERIC_ flags to the correct header
gpio: generic: rename BGPIOF_ flags to GPIO_GENERIC_
gpio: nomadik: fix the debugfs helper stub
MAINTAINERS: Add entry on MAX7360 driver
input: misc: Add support for MAX7360 rotary
input: keyboard: Add support for MAX7360 keypad
gpio: max7360: Add MAX7360 gpio support
gpio: regmap: Allow to provide init_valid_mask callback
gpio: regmap: Allow to allocate regmap-irq device
pwm: max7360: Add MAX7360 PWM support
pinctrl: Add MAX7360 pinctrl driver
mfd: Add max7360 support
dt-bindings: mfd: gpio: Add MAX7360
rtc: Add Nuvoton NCT6694 RTC support
hwmon: Add Nuvoton NCT6694 HWMON support
watchdog: Add Nuvoton NCT6694 WDT support
can: Add Nuvoton NCT6694 CANFD support
i2c: Add Nuvoton NCT6694 I2C support
gpio: Add Nuvoton NCT6694 GPIO support
...
* New
- Add a new API cros_ec_device_registered() for checking if the
cros_ec_deivce is ready.
* Improvements
- Use TRAILING_OVERLAP() to fix -Wflex-array-member-not-at-end
warning.
- Defer probe until parent EC device is ready in cros_ec_keyb.
* Cleanups
- Remove redundant and simplify code in cros_ec_chardev.
- Centralize cros_ec_device allocation and initialization to remove
duplicate code.
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCaNku+BMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0DFkA/0+FF785x38lKTlAnJMSlNcABwYzsi9Z
b70Yc2ytNzp8AP9x5gk68EdwkLF97Mu08JvL8ZUPL6z5jQ3PPd96QDcrCg==
=zRIv
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Add a new API cros_ec_device_registered() for checking if the
cros_ec_deivce is ready
Improvements:
- Use TRAILING_OVERLAP() to fix -Wflex-array-member-not-at-end
warning
- Defer probe until parent EC device is ready in cros_ec_keyb
Cleanups:
- Remove redundant and simplify code in cros_ec_chardev
- Centralize cros_ec_device allocation and initialization to remove
duplicate code"
* tag 'chrome-platform-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
Input: cros_ec_keyb - Defer probe until parent EC device is registered
platform/chrome: cros_ec: Add a flag to track registration state
platform/chrome: cros_ec: Separate initialization from cros_ec_register()
platform/chrome: Centralize common cros_ec_device initialization
platform/chrome: Centralize cros_ec_device allocation
platform/chrome: wilco_ec: Remove redundant semicolons
platform/chrome: cros_ec: Avoid -Wflex-array-member-not-at-end warning
platform/chrome: cros_ec_chardev: Decouple fops from struct cros_ec_dev
platform/chrome: cros_ec_chardev: Remove redundant struct field
At present VMBus driver is hinged off of CONFIG_HYPERV which entails
lot of builtin code and encompasses too much. It's not always clear
what depends on builtin hv code and what depends on VMBus. Setting
CONFIG_HYPERV as a module and fudging the Makefile to switch to builtin
adds even more confusion. VMBus is an independent module and should have
its own config option. Also, there are scenarios like baremetal dom0/root
where support is built in with CONFIG_HYPERV but without VMBus. Lastly,
there are more features coming down that use CONFIG_HYPERV and add more
dependencies on it.
So, create a fine grained HYPERV_VMBUS option and update Kconfigs for
dependency on VMBus.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The probe function in the psxpad-spi driver calls spi_setup()
but fails to check its return value. If the SPI bus setup fails,
the driver will still load successfully, resulting in potential
error in later I/O operations.
Add a check for the return value of spi_setup() and return
an error on failure.
Fixes: 8be193c7b1f4 ("Input: add support for PlayStation 1/2 joypads connected via SPI")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Struct ff_effect_compat is embedded twice inside
uinput_ff_upload_compat, contains internal padding. In particular, there
is a hole after struct ff_replay to satisfy alignment requirements for
the following union member. Without clearing the structure,
copy_to_user() may leak stack data to userspace.
Initialize ff_up_compat to zero before filling valid fields.
Fixes: 2d56f3a32c0e ("Input: refactor evdev 32bit compat to be shareable with uinput")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Link: https://lore.kernel.org/r/20250928063737.74590-1-zhen.ni@easystack.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for the I2C-connected Awinic AW86927 LRA haptic driver.
This driver includes a hardcoded sine waveform to be uploaded to the
AW86927's SRAM for haptic playback.
This driver does not currently support all the capabilities of the
AW86927, such as F0 calibration, RTP mode, and CONT mode.
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
Link: https://lore.kernel.org/r/20250925-aw86927-v3-2-1fc6265b42de@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
'Resin' (*Res*et *In*put) is usually connected to a volume down button
on devices, which is usually not expected to wake up the device from
suspend.
On the other hand, pwrkey should keep wakeup on. So do not enable wakeup
for resin unless the "wakeup-source" property is specified in
devicetree.
Note, that this does change behavior by turning off wakeup by default
for 'resin' and requiring a new dt property to be added to turn it on
again. But since this is not expected behavior in the first place, and
most users will not expect this, I'd argue this change is acceptable.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250909-resin-wakeup-v1-2-46159940e02b@lucaweiss.eu
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Introduce support for the Hynitron CST816x series touchscreen controller
used for 240×240 1.28-inch Round LCD Display Module manufactured
by Waveshare Electronics. The driver is designed based on an Arduino
implementation marked as under MIT License. This driver is written
for a particular round display based on the CST816S controller, which
is not compatiable with existing driver for Hynitron controllers.
Signed-off-by: Oleh Kuzhylnyi <kuzhylol@gmail.com>
Link: https://lore.kernel.org/r/20250921125939.249788-2-kuzhylol@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Set the glitch threshold by DTS property and keep the existing default
behavior if the 'debounce-delay-us' is not present.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250923143746.2857292-7-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
"The data line must be sampled" makes much more sense than what was
previously written, and given that "s" and "d" are neighbors on the
QWERTY keybord, it was probably a typo.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20250923-ps2-typo-v1-1-03d2468acc32@posteo.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This provides support for generic touchscreen configuration options like
swapped-x-y, min-x, min-y, size-x, size-y, etc.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250909054903.11519-3-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Support for platform data from dropped from twl in 4a346a03a63c ("mfd:
twl: Remove platform data support") and board files were dropped even
earlier. There are no in-kernel users of twl4030_keypad_data in the
kernel, and the driver supports configuration via generic device
properties.
Drop support of static platform data from the keypad driver.
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/tica7ol7xwv5tqb7hlkzu6wkiv4quxwrpqv6croe4wfnwvj6wv@4ob6ktqqi3cr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a simple driver for the Himax HX852x(ES) touch panel controller,
with support for multi-touch and capacitive touch keys.
The driver is somewhat based on sample code from Himax. However, that
code was rather confusing, so that we spent a significant amount of
time just trying to understand the packet format and register commands.
In this driver they are described with clean structs and defines rather
than magic numbers and offset calculations.
Co-developed-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20250915-hx852x-v5-2-b938182f1056@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----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=fwWe
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-input-pinctrl-pwm-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Sync up with MFD tree to bring in support for MAX7360.
Add driver for Maxim Integrated MAX7360 keypad controller, providing
support for up to 64 keys, with a matrix of 8 columns and 8 rows.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-8-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add a flag to generate ABS_PRESSURE as sum of ABS_MT_PRESSURE across
all slots.
This flag should be set if one knows a device reports true force and would
like to report total force to the userspace.
Signed-off-by: Angela Czubak <aczubak@google.com>
Co-developed-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jonathan Denose <jdenose@google.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
- a quirk to i8042 for yet another TUXEDO laptop
- a fix to mtk-pmic-keys driver to properly handle MT6359
- a fix to iqs7222 driver to only enable proximity interrupt if it is
mapper to a key or a switch event
- an update to xpad controller driver to recognize Flydigi Apex 5
controller
- an update to maintainers file to drop bounding entry for Melfas touch
controller.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaMYYKAAKCRBAj56VGEWX
nOvAAP9IkaFQyTC8hWVUU8w6Q5gC7+pF3lccnOckdDxvoY6kVAEAsQMz8J4Df7ZK
OEaOPUCzWn5mcrAR74+LGXqGgRYGAwk=
=ctHa
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a quirk to i8042 for yet another TUXEDO laptop
- a fix to mtk-pmic-keys driver to properly handle MT6359
- a fix to iqs7222 driver to only enable proximity interrupt
if it is mapped to a key or a switch event
- an update to xpad controller driver to recognize Flydigi Apex 5
controller
- an update to maintainers file to drop bounding entry for Melfas
touch controller
* tag 'input-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Input: Drop melfas-mip4 section
Input: mtk-pmic-keys - MT6359 has a specific release irq
Input: i8042 - add TUXEDO InfinityBook Pro Gen10 AMD to i8042 quirk table
Input: iqs7222 - avoid enabling unused interrupts
Input: xpad - add support for Flydigi Apex 5
The `cros_ec_keyb` driver can be probed before the cros_ec_device has
completed the registration. This creates a race condition where
`cros_ec_keyb` might access uninitialized data.
Fix this by calling `cros_ec_device_registered()` to check the parent's
status. If the device is not yet ready, return -EPROBE_DEFER to ensure
the probe is retried later.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20250828083601.856083-6-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
mc13xxx_irq_ack() got deprecated and became dead code with commit
10f9edaeaa30 ("mfd: mc13xxx: Use regmap irq framework for interrupts").
It should be safe to remove it now.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Link: https://lore.kernel.org/r/20250811064358.1659-1-akurz@blala.de
Signed-off-by: Lee Jones <lee@kernel.org>
There are no in-kernel users of spear kbd_platform_data in the kernel,
and the driver supports configuration via device tree, so drop
support of static platform data and move properties parsing from
OF-specific methods to generic ones.
Link: https://lore.kernel.org/r/vppjxui76im26uamznx7evm5lmbe3d6v3oxsa7mqyytykh4zm6@nhlf33v3hp6g
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are no in-kernel users of pxa27x_keypad_platform_data in the
kernel, and the driver supports configuration via device tree, so drop
support of static platform data and move properties parsing from
OF-specific methods to generic ones.
Link: https://lore.kernel.org/r/20250817215316.1872689-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Support for MT6359 PMIC keys has been added recently. However, the key
release event is not properly handled: only key press events are
generated, leaving key states stuck in "pressed".
This patch ensures that both key press and key release events are
properly emitted by handling the release logic correctly.
Introduce a 'key_release_irq' member to the 'mtk_pmic_regs' to identify
the devices that have a separate irq for the release event.
Fixes: bc25e6bf032e ("Input: mtk-pmic-keys - add support for MT6359 PMIC keys")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://lore.kernel.org/r/20250905-radxa-nio-12-l-gpio-v3-1-40f11377fb55@collabora.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Occasionally wakes up from suspend with missing input on the internal
keyboard. Setting the quirks appears to fix the issue for this device as
well.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250826142646.13516-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If a proximity event node is defined so as to specify the wake-up
properties of the touch surface, the proximity event interrupt is
enabled unconditionally. This may result in unwanted interrupts.
Solve this problem by enabling the interrupt only if the event is
mapped to a key or switch code.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/aKJxxgEWpNaNcUaW@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The touch resistance calculation in the tsc2007 driver is prone to
overflow if (z2 - z1) is large and also x is reasonably big. This
overflow results in the driver emitting input events when very little
touch pressure is applied. In these events the x and y coordinates can
be substantially off.
Avoid the overflow by using u64 when calculating resistance value.
Signed-off-by: Johannes Kirchmair <johannes.kirchmair@skidata.com>
Link: https://lore.kernel.org/r/20250129-fix_tsc_calculation_overflow-v2-1-9e51333496ad@skidata.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In case tsc2007 is used as an ADC sensor there will be no interrupt
provided at all, so set up an interrupt only if one is present.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250824091927.105121-3-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since pen GPIO request is optional, there is no reason to throw dev_warn if
such GPIO is not defined.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250824091927.105121-2-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----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=VecX
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-input-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Sync up with MFD tree to bring in support for tps6594.
TPS6594 defines two interrupts for the power button one for push and
one for release.
This driver is very simple in that it maps the push interrupt to a key
input and the release interrupt to a key release.
Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20250826134631.1499936-2-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
A number of modules in the input subsystem use EXPORT_SYMBOL() and
friends without explicitly including the corresponding header
<linux/export.h>. While the build currently succeeds due to this header
being pulled in transitively, this is not guaranteed to be the case in
the future.
Let's add the explicit include to make the dependencies clear and
prevent future build breakage.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The input_bits_to_string() function has special handling for compat
tasks, formatting the output as a sequence of 32-bit hex values. To
better isolate compatibility-related code, move it from
drivers/input/input.c to drivers/input/input-compat.c.
No functional change intended.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmiiVhIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGehcH/1jKJr34F+6Y+due
gW76qTh9BrVq4KjKecQwOxtyN40oRLGR5389CUlQPEWk6jFqRVZ57ShZPElgpxFm
gavwu9NlYEKr1VvWTJFMwXPghzRBnOBG6Ml+LXrcwHbCEi8otvFOGJcPe5gRQcW9
GJV2cdxrZkCqSpy1ZpWJJ4d2gTc24mzvQvkaJrY/YfHgZGG77GL03qk8t2lXHgBN
YbYUsgOXn6rVmzaS13ahJbQvj6ixKKWuVbm4fWOw0KFjyuV6K/U1CTOtNcUZrVkW
cwIbQ5mDVUF7UDwmEAsnTn4iYgazwYfhmE8UvuP65uXPyyZrNojvaGfUX9J9/moT
+gx2P1Q=
=s9HD
-----END PGP SIGNATURE-----
Merge tag 'v6.17-rc2' into HEAD
Sync up with mainline to bring in changes to include/linux/sprintf.h
With kernel supporting deferred probing there is no longer need to play
games with different initcall levels trying to influence probe order.
Switch the driver to use standard module_i2c_driver() to register the
driver.
Link: https://lore.kernel.org/r/dhb2wzrhspbjh2gbt3iny7odsrpq2bbqldq276zuxwc4bnhgbl@qkbxj6yrihqv
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
