This handles PA Sync Lost event which previously was assumed to be
handled with BIG Sync Lost but their lifetime are not the same thus why
there are 2 different events to inform when each sync is lost.
Fixes: b2a5f2e1c127 ("Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Contrary to what was stated on d36349ea73d8 ("Bluetooth: hci_conn:
Fix running bis_cleanup for hci_conn->type PA_LINK") the PA_LINK does
in fact needs to run bis_cleanup in order to terminate the PA Sync,
since that is bond to the listening socket which is the entity that
controls the lifetime of PA Sync, so if it is closed/released the PA
Sync shall be terminated, terminating the PA Sync shall not result in
the BIG Sync being terminated since once the later is established it
doesn't depend on the former anymore.
If the use user wants to reconnect/rebind a number of BIS(s) it shall
keep the socket open until it no longer needs the PA Sync, which means
it retains full control of the lifetime of both PA and BIG Syncs.
Fixes: d36349ea73d8 ("Bluetooth: hci_conn: Fix running bis_cleanup for hci_conn->type PA_LINK")
Fixes: a7bcffc673de ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_chan_close() needs to be called in l2cap_chan_lock(), otherwise
l2cap_le_sig_cmd() etc. may run concurrently.
Add missing locks around l2cap_chan_close().
Fixes: 6b8d4a6a0314 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
disconnect_all_peers() calls sleeping function (l2cap_chan_close) under
spinlock. Holding the lock doesn't actually do any good -- we work on a
local copy of the list, and the lock doesn't protect against peer->chan
having already been freed.
Fix by taking refcounts of peer->chan instead. Clean up the code and
old comments a bit.
Take devices_lock instead of RCU, because the kfree_rcu();
l2cap_chan_put(); construct in chan_close_cb() does not guarantee
peer->chan is necessarily valid in RCU.
Also take l2cap_chan_lock() which is required for l2cap_chan_close().
Log: (bluez 6lowpan-tester Client Connect - Disable)
------
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575
...
<TASK>
...
l2cap_send_disconn_req (net/bluetooth/l2cap_core.c:938 net/bluetooth/l2cap_core.c:1495)
...
? __pfx_l2cap_chan_close (net/bluetooth/l2cap_core.c:809)
do_enable_set (net/bluetooth/6lowpan.c:1048 net/bluetooth/6lowpan.c:1068)
------
Fixes: 90305829635d ("Bluetooth: 6lowpan: Converting rwlocks to use RCU")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_chan_put() is exported, so export also l2cap_chan_hold() for
modules.
l2cap_chan_hold() has use case in net/bluetooth/6lowpan.c
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth 6lowpan.c confuses BDADDR_LE and ADDR_LE_DEV address types,
e.g. debugfs "connect" command takes the former, and "disconnect" and
"connect" to already connected device take the latter. This is due to
using same value both for l2cap_chan_connect and hci_conn_hash_lookup_le
which take different dst_type values.
Fix address type passed to hci_conn_hash_lookup_le().
Retain the debugfs API difference between "connect" and "disconnect"
commands since it's been like this since 2015 and nobody apparently
complained.
Fixes: f5ad4ffceba0 ("Bluetooth: 6lowpan: Use hci_conn_hash_lookup_le() when possible")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth 6lowpan.c netdev has header_ops, so it must set link-local
header for RX skb, otherwise things crash, eg. with AF_PACKET SOCK_RAW
Add missing skb_reset_mac_header() for uncompressed ipv6 RX path.
For the compressed one, it is done in lowpan_header_decompress().
Log: (BlueZ 6lowpan-tester Client Recv Raw - Success)
------
kernel BUG at net/core/skbuff.c:212!
Call Trace:
<IRQ>
...
packet_rcv (net/packet/af_packet.c:2152)
...
<TASK>
__local_bh_enable_ip (kernel/softirq.c:407)
netif_rx (net/core/dev.c:5648)
chan_recv_cb (net/bluetooth/6lowpan.c:294 net/bluetooth/6lowpan.c:359)
------
Fixes: 18722c247023 ("Bluetooth: Enable 6LoWPAN support for BT LE devices")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mesh_send_done timer is not canceled when hdev is removed, which causes
crash if the timer triggers after hdev is gone.
Cancel the timer when MGMT removes the hdev, like other MGMT timers.
Should fix the BUG: sporadically seen by BlueZ test bot
(in "Mesh - Send cancel - 1" test).
Log:
------
BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0
...
Freed by task 36:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x43/0x70
kfree+0x103/0x500
device_release+0x9a/0x210
kobject_put+0x100/0x1e0
vhci_release+0x18b/0x240
------
Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh")
Link: https://lore.kernel.org/linux-bluetooth/67364c09.0c0a0220.113cba.39ff@mx.google.com/
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In the parse_adv_monitor_pattern() function, the value of
the 'length' variable is currently limited to HCI_MAX_EXT_AD_LENGTH(251).
The size of the 'value' array in the mgmt_adv_pattern structure is 31.
If the value of 'pattern[i].length' is set in the user space
and exceeds 31, the 'patterns[i].value' array can be accessed
out of bound when copied.
Increasing the size of the 'value' array in
the 'mgmt_adv_pattern' structure will break the userspace.
Considering this, and to avoid OOB access revert the limits for 'offset'
and 'length' back to the value of HCI_MAX_AD_LENGTH.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: db08722fc7d4 ("Bluetooth: hci_core: Fix missing instances using HCI_MAX_AD_LENGTH")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In hci_cmd_complete_evt(), if the command complete event has an unknown
opcode, we assume the first byte of the remaining skb->data contains the
return status. However, parameter data has previously been pulled in
hci_event_func(), which may leave the skb empty. If so, using skb->data[0]
for the return status uses un-init memory.
The fix is to check skb->len before using skb->data.
Reported-by: syzbot+a9a4bedfca6aa9d7fa24@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a9a4bedfca6aa9d7fa24
Tested-by: syzbot+a9a4bedfca6aa9d7fa24@syzkaller.appspotmail.com
Fixes: afcb3369f46ed ("Bluetooth: hci_event: Fix vendor (unknown) opcode status handling")
Signed-off-by: Raphael Pinsonneault-Thibeault <rpthibeault@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The RFCOMM driver confuses the local and remote modem control signals,
which specifically means that the reported DTR and RTS state will
instead reflect the remote end (i.e. DSR and CTS).
This issue dates back to the original driver (and a follow-on update)
merged in 2002, which resulted in a non-standard implementation of
TIOCMSET that allowed controlling also the TS07.10 IC and DV signals by
mapping them to the RI and DCD input flags, while TIOCMGET failed to
return the actual state of DTR and RTS.
Note that the bogus control of input signals in tiocmset() is just
dead code as those flags will have been masked out by the tty layer
since 2003.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Periodic advertising enabled flag cannot be tracked by the enabled
flag since advertising and periodic advertising each can be
enabled/disabled separately from one another causing the states to be
inconsistent when for example an advertising set is disabled its
enabled flag is set to false which is then used for periodic which has
not being disabled.
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes bis_cleanup not considering connections in BT_OPEN state
before attempting to remove the BIG causing the following error:
btproxy[20110]: < HCI Command: LE Terminate Broadcast Isochronous Group (0x08|0x006a) plen 2
BIG Handle: 0x01
Reason: Connection Terminated By Local Host (0x16)
> HCI Event: Command Status (0x0f) plen 4
LE Terminate Broadcast Isochronous Group (0x08|0x006a) ncmd 1
Status: Unknown Advertising Identifier (0x42)
Fixes: fa224d0c094a ("Bluetooth: ISO: Reassociate a socket with an active BIS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Socket dst_type cannot be directly assigned to hci_conn->type since
there domain is different which may lead to the wrong address type being
used.
Fixes: 6a5ad251b7cd ("Bluetooth: ISO: Fix possible circular locking dependency")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reverts commit c9d84da18d1e0d28a7e16ca6df8e6d47570501d4. It
replaces in L2CAP calls to msecs_to_jiffies() to secs_to_jiffies()
and updates the constants accordingly. But the constants are also
used in LCAP Configure Request and L2CAP Configure Response which
expect values in milliseconds.
This may prevent correct usage of L2CAP channel.
To fix it, keep those constants in milliseconds and so revert this
change.
Fixes: c9d84da18d1e ("Bluetooth: L2CAP: convert timeouts to secs_to_jiffies()")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is a BUG: KASAN: stack-out-of-bounds in set_mesh_sync due to
memcpy from badly declared on-stack flexible array.
Another crash is in set_mesh_complete() due to double list_del via
mgmt_pending_valid + mgmt_pending_remove.
Use DEFINE_FLEX to declare the flexible array right, and don't memcpy
outside bounds.
As mgmt_pending_valid removes the cmd from list, use mgmt_pending_free,
and also report status on error.
Fixes: 302a1f674c00d ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the state tracking of advertisement set/instance 0x00 which
is considered a legacy instance and is not tracked individually by
adv_instances list, previously it was assumed that hci_dev itself would
track it via HCI_LE_ADV but that is a global state not specifc to
instance 0x00, so to fix it a new flag is introduced that only tracks the
state of instance 0x00.
Fixes: 1488af7b8b5f ("Bluetooth: hci_sync: Fix hci_resume_advertising_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Socket dst_type cannot be directly assigned to hci_conn->type since
there domain is different which may lead to the wrong address type being
used.
Fixes: 6a5ad251b7cd ("Bluetooth: ISO: Fix possible circular locking dependency")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_cmd_sync_dequeue_once() does lookup and then cancel
the entry under two separate lock sections. Meanwhile,
hci_cmd_sync_work() can also delete the same entry,
leading to double list_del() and "UAF".
Fix this by holding cmd_sync_work_lock across both
lookup and cancel, so that the entry cannot be removed
concurrently.
Fixes: 505ea2b29592 ("Bluetooth: hci_sync: Add helper functions to manipulate cmd_sync queue")
Reported-by: Cen Zhang <zzzccc427@163.com>
Signed-off-by: Cen Zhang <zzzccc427@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the __struct_group() helper to fix 31 instances of the following
type of warnings:
30 net/bluetooth/mgmt_config.c:16:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
1 net/bluetooth/mgmt_config.c:22:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When creating an advertisement for BIG the address shall not be
non-resolvable since in case of acting as BASS/Broadcast Assistant the
address must be the same as the connection in order to use the PAST
method and even when PAST/BASS are not in the picture a Periodic
Advertisement can still be synchronized thus the same argument as to
connectable advertisements still stand.
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
For ISO_CONT RX, the data from skb is copied to conn->rx_skb, but the
skb is leaked.
Free skb after copying its data.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If iso_conn is freed when RX is incomplete, free any leftover skb piece.
Fixes: dc26097bdb86 ("Bluetooth: ISO: Use kref to track lifetime of iso_conn")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempt to fix similar issue to sco_conn_free where if the
conn->sk is not set to NULL may lead to UAF on iso_conn_free.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prints the information about the hcon on hci_low_sent to confirm
all connection are being processed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to print the number of packets pending to be transmitted
in the conn->data_q.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The debug UUID was only getting set if MGMT_OP_READ_EXP_FEATURES_INFO
was not called with a specific index which breaks the likes of
bluetoothd since it only invokes MGMT_OP_READ_EXP_FEATURES_INFO when an
adapter is plugged, so instead of depending hdev not to be set just
enable the UUID on any index like it was done with iso_sock_uuid.
Fixes: e625e50ceee1 ("Bluetooth: Introduce debug feature when dynamic debug is disabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to detect if an ISO link has been waiting for an ISO
buffer for longer than the maximum allowed transport latency then
proceed to use hci_link_tx_to which prints an error and disconnects.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This aligns the usage of socket sk_sndtimeo as conn_timeout when
initiating a connection and then use it when scheduling the
resulting HCI command, similar to what has been done in bf98feea5b65
("Bluetooth: hci_conn: Always use sk_timeo as conn_timeout").
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ISO packets shall not use LE/ACL buffer pool, that feature seem to be
exclusive to LE-ACL only.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the controller has no buffers left return -ENOBUFF to indicate that
iso_cnt might be out of sync.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_resume_advertising_sync is suppose to resume all instance paused by
hci_pause_advertising_sync, this logic is used for procedures are only
allowed when not advertising, but instance 0x00 was not being
re-enabled.
Fixes: ad383c2c65a5 ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Function set_name_sync() uses hdev->dev_name field to send
HCI_OP_WRITE_LOCAL_NAME command, but copying from data to hdev->dev_name
is called after mgmt cmd was queued, so it is possible that function
set_name_sync() will read old name value.
This change adds name as a parameter for function hci_update_name_sync()
to avoid race condition.
Fixes: 6f6ff38a1e14 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_LOCAL_NAME")
Signed-off-by: Pavel Shpakovskiy <pashpakovskii@salutedevices.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a BIG sync is lost, the device should be set to "disconnected".
This ensures symmetry with the ISO path setup, where the device is
marked as "connected" once the path is established. Without this
change, the device state remains inconsistent and may lead to a
memory leak.
Fixes: b2a5f2e1c127 ("Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event")
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to detect if HCI_EV_NUM_COMP_PKTS contain an unbalanced
(more than currently considered outstanding) number of packets otherwise
it could cause the hcon->sent to underflow and loop around breaking the
tracking of the outstanding packets pending acknowledgment.
Fixes: f42809185896 ("Bluetooth: Simplify num_comp_pkts_evt function")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When suspending, the disconnect command for an active Bluetooth
connection could be issued, but the corresponding
`HCI_EV_DISCONN_COMPLETE` event might not be received before the system
completes the suspend process. This can lead to an inconsistent state.
On resume, the controller may auto-accept reconnections from the same
device (due to suspend event filters), but these new connections are
rejected by the kernel which still has connection objects from before
suspend. Resulting in errors like:
```
kernel: Bluetooth: hci0: ACL packet for unknown connection handle 1
kernel: Bluetooth: hci0: Ignoring HCI_Connection_Complete for existing
connection
```
This is a btmon snippet that shows the issue:
```
< HCI Command: Disconnect (0x01|0x0006) plen 3
Handle: 1 Address: 78:20:A5:4A:DF:28 (Nintendo Co.,Ltd)
Reason: Remote User Terminated Connection (0x13)
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) ncmd 2
Status: Success (0x00)
[...]
// Host suspends with the event filter set for the device
// On resume, the device tries to reconnect with a new handle
> HCI Event: Connect Complete (0x03) plen 11
Status: Success (0x00)
Handle: 2
Address: 78:20:A5:4A:DF:28 (Nintendo Co.,Ltd)
// Kernel ignores this event because there is an existing connection
with
// handle 1
```
By explicitly setting the connection state to BT_CLOSED we can ensure a
consistent state, even if we don't receive the disconnect complete event
in time.
Link: https://github.com/bluez/bluez/issues/1226
Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the host sends an HCI_OP_DISCONNECT command, the controller may
respond with the status HCI_ERROR_UNKNOWN_CONN_ID (0x02). E.g. this can
happen on resume from suspend, if the link was terminated by the remote
device before the event mask was correctly set.
This is a btmon snippet that shows the issue:
```
> ACL Data RX: Handle 3 flags 0x02 dlen 12
L2CAP: Disconnection Request (0x06) ident 5 len 4
Destination CID: 65
Source CID: 72
< ACL Data TX: Handle 3 flags 0x00 dlen 12
L2CAP: Disconnection Response (0x07) ident 5 len 4
Destination CID: 65
Source CID: 72
> ACL Data RX: Handle 3 flags 0x02 dlen 12
L2CAP: Disconnection Request (0x06) ident 6 len 4
Destination CID: 64
Source CID: 71
< ACL Data TX: Handle 3 flags 0x00 dlen 12
L2CAP: Disconnection Response (0x07) ident 6 len 4
Destination CID: 64
Source CID: 71
< HCI Command: Set Event Mask (0x03|0x0001) plen 8
Mask: 0x3dbff807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
[...]
< HCI Command: Disconnect (0x01|0x0006) plen 3
Handle: 3 Address: 78:20:A5:4A:DF:28 (Nintendo Co.,Ltd)
Reason: Remote User Terminated Connection (0x13)
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) ncmd 1
Status: Unknown Connection Identifier (0x02)
```
Currently, the hci_cs_disconnect function treats any non-zero status
as a command failure. This can be misleading because the connection is
indeed being terminated and the controller is confirming that is has no
knowledge of that connection handle. Meaning that the initial request of
disconnecting a device should be treated as done.
With this change we allow the function to proceed, following the success
path, which correctly calls `mgmt_device_disconnected` and ensures a
consistent state.
Link: https://github.com/bluez/bluez/issues/1226
Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to make unacked packet handling more robust by detecting
if there are no connections left then restore all buffers of the
respective pool.
Fixes: 5638d9ea9c01 ("Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The commit e07a06b4eb41 ("Bluetooth: Convert SCO configure_datapath to
hci_sync") missed to update the *return* statement under the *case* of
BT_CODEC_TRANSPARENT in hci_enhanced_setup_sync(), which led to returning
success (0) instead of the negative error code (-EINVAL). However, the
result of hci_enhanced_setup_sync() seems to be ignored anyway, since NULL
gets passed to hci_cmd_sync_queue() as the last argument in that case and
the only function interested in that result is specified by that argument.
Fixes: e07a06b4eb41 ("Bluetooth: Convert SCO configure_datapath to hci_sync")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BN == 0x00 in CIS Established means no isochronous data for the
corresponding direction (Core v6.1 pp. 2394). In this case SDU MTU
should be 0.
However, the specification does not say the Max_PDU_C_To_P or P_To_C are
then zero. Intel AX210 in Framed CIS mode sets nonzero Max_PDU for
direction with zero BN. This causes failure later when we try to LE
Setup ISO Data Path for disabled direction, which is disallowed (Core
v6.1 pp. 2750).
Fix by setting SDU MTU to 0 if BN == 0.
Fixes: 2be22f1941d5f ("Bluetooth: hci_event: Fix parsing of CIS Established Event")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ll_privacy_capable only indicates that the controller supports the
feature but it doesnt' check that LE is enabled so it end up being
marked as active in the current settings when it shouldn't.
Fixes: ad383c2c65a5 ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
{cis,bis}_capable only indicates the controller supports the feature
since it doesn't check that LE is enabled so it shall not be used for
current setting, instead this introduces {cis,bis}_enabled macros that
can be used to indicate that these features are currently enabled.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Fixes: ae7533613133 ("Bluetooth: Check for ISO support in controller")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes Broadcaster/Broadcast Source not sending HCI_OP_LE_TERM_BIG
because HCI_CONN_PER_ADV where not being set.
Fixes: a7bcffc673de ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Connections with type of PA_LINK shall be considered temporary just to
track the lifetime of PA Sync setup, once the BIG Sync is established
and connection are created with BIS_LINK the existing PA_LINK
connection shall not longer use bis_cleanup otherwise it terminates the
PA Sync when that shall be left to BIS_LINK connection to do it.
Fixes: a7bcffc673de ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
