The node describing the RP1 endpoint currently uses a specific name
('rp1_nexus') that does not correctly reflect the PCI topology.
Update the DT with the correct topology and use generic node names.
Additionally, since the driver dropped overlay support in favor of a
fully described DT, rename '...-ovl-rp1.dts' to '...-base.dtsi' for
inclusion in the board DTB, as it is no longer compiled as a
standalone DTB.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/827b12ba48bb47bc77a0f5e5617aea961c8bc6b5.1766077285.git.andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The RP1 ethernet controller DT node contains a local-mac-address
property to pass the MAC address from the boot loader to the kernel. The
boot loader does not fill the MAC address as the ethernet0 alias is
missing. Add it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/20251102111443.18206-1-laurent.pinchart@ideasonboard.com
Fixes: 43456fdfc014 ("arm64: dts: broadcom: Enable RP1 ethernet for Raspberry Pi 5")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
In Raspberry Pi 5 DTS, the Ethernet clock rates must be assigned
as the default clock register values are not valid for the
Ethernet interface to function.
This can be done either in rp1_clocks node or in rp1_eth node.
Define the rates in rp1_eth node, as those clocks are 'leaf' clocks
used specifically by the Ethernet device only.
Fixes: 43456fdfc014 ("arm64: dts: broadcom: Enable RP1 ethernet for Raspberry Pi 5")
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/20251021135533.5517-1-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Current board DTS for Raspberry Pi5 states that bcm2712-rpi-5-b.dts
should not be modified and all declarations should go in the overlay
board DTS instead (bcm2712-rpi-5-b-ovl-rp1.dts).
There's a caveat though: there's currently no infrastructure to reliably
reference nodes that have not been declared yet, as is the case when
loading those nodes from a runtime overlay. For more details about
these limitations see [1] and follow-ups.
Change the comment to make it clear which DTS file will host specific
nodes, especially the RP1 related nodes which should be customized
outside the overlay DTS.
Link
[1] - https://lore.kernel.org/all/CAMEGJJ3=W8_R0xBvm8r+Q7iExZx8xPBHEWWGAT9ngpGWDSKCaQ@mail.gmail.com/
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/47f6368a77d6bd846c02942d20c07dd48e0ae7df.1754914766.git.andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The pcie1 and pcie2 override nodes to enable the respective peripherals are
declared both in bcm2712-rpi-5-b.dts and bcm2712-rpi-5-b-ovl-rp1.dts, which
makes those declared in the former file redundant.
Drop those redundant nodes from the board devicetree.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/2865b787d893fd1dcf816e1c96856711754d612d.1754914766.git.andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Add the fully populated DTS for RaspberryPi 5 which includes
the RP1 node definition. The inclusion tree is as follow (the
arrow points to the includer):
rp1-common.dtsi ----> rp1-nexus.dtsi ----> bcm2712-rpi-5-b.dts
^
|
bcm2712-rpi-5-b-ovl-rp1.dts
This is designed to maximize the compatibility with downstream DT
while ensuring that a fully defined DT (one which includes the RP1
node as opposed to load it from overlay at runtime) is present
since early boot stage.
Since the preferred board DT is the fully populated one, name it
bcm2712-rpi-5-b.dts and move the previous one into
bcm2712-rpi-5-b-ovl-rp1.dts.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/20250529135052.28398-9-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The RP1 found on Raspberry Pi 5 board needs an external crystal at 50MHz.
Add clk_rp1_xosc node to provide that.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250529135052.28398-8-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Enable pcie1 and pcie2 DT nodes. Pcie1 is used for the extension
connector and pcie2 is used for RP1 south-bridge.
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Link: https://lore.kernel.org/r/20250120130119.671119-12-svarbanov@suse.de
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The BCM2712 SoC family can be found on Raspberry Pi 5.
Add minimal SoC and board (Rpi5 specific) dts file to be able to
boot from SD card and use console on debug UART.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/874589f6c621036620cca944986e5be7238b4784.1717061147.git.andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
