hv_set_non_nested_msr() has special handling for SINT MSRs
when a paravisor is present. In addition to updating the MSR on the
host, the mirror MSR in the paravisor is updated, including with the
proxy bit. But with Confidential VMBus, the proxy bit must not be
used, so add a special case to skip it.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The existing Hyper-V wrappers for getting and setting MSRs are
hv_get/set_msr(). Via hv_get/set_non_nested_msr(), they detect
when running in a CoCo VM with a paravisor, and use the TDX or
SNP guest-host communication protocol to bypass the paravisor
and go directly to the host hypervisor for SynIC MSRs. The "set"
function also implements the required special handling for the
SINT MSRs.
Provide functions that allow manipulating the SynIC registers
through the paravisor. Move vmbus_signal_eom() to a more
appropriate location (which also avoids breaking KVM).
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Confidential VMBus requires enabling paravisor SynIC, and
the x86_64 guest has to inspect the Virtualization Stack (VS)
CPUID leaf to see if Confidential VMBus is available. If it is,
the guest shall enable the paravisor SynIC.
Read the relevant data from the VS CPUID leaf. Refactor the
code to avoid repeating CPUID and add flags to the struct
ms_hyperv_info. For ARM64, the flag for Confidential VMBus
is not set which provides the desired behaviour for now as
it is not available on ARM64 just yet. Once ARM64 CCA guests
are supported, this flag will be set unconditionally when
running such a guest.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When Secure AVIC is enabled, VMBus driver should
call x2apic Secure AVIC interface to allow Hyper-V
to inject VMBus message interrupt.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When the MSHV_ROOT_HVCALL ioctl is executing a hypercall, and gets
HV_STATUS_INSUFFICIENT_MEMORY, it deposits memory and then returns
-EAGAIN to userspace. The expectation is that the VMM will retry.
However, some VMM code in the wild doesn't do this and simply fails.
Rather than force the VMM to retry, change the ioctl to deposit
memory on demand and immediately retry the hypercall as is done with
all the other hypercall helper functions.
In addition to making the ioctl easier to use, removing the need for
multiple syscalls improves performance.
There is a complication: unlike the other hypercall helper functions,
in MSHV_ROOT_HVCALL the input is opaque to the kernel. This is
problematic for rep hypercalls, because the next part of the input
list can't be copied on each loop after depositing pages (this was
the original reason for returning -EAGAIN in this case).
Introduce hv_do_rep_hypercall_ex(), which adds a 'rep_start'
parameter. This solves the issue, allowing the deposit loop in
MSHV_ROOT_HVCALL to restart a rep hypercall after depositing pages
partway through.
Fixes: 621191d709b1 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
At present VMBus driver is hinged off of CONFIG_HYPERV which entails
lot of builtin code and encompasses too much. It's not always clear
what depends on builtin hv code and what depends on VMBus. Setting
CONFIG_HYPERV as a module and fudging the Makefile to switch to builtin
adds even more confusion. VMBus is an independent module and should have
its own config option. Also, there are scenarios like baremetal dom0/root
where support is built in with CONFIG_HYPERV but without VMBus. Lastly,
there are more features coming down that use CONFIG_HYPERV and add more
dependencies on it.
So, create a fine grained HYPERV_VMBUS option and update Kconfigs for
dependency on VMBus.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Detect booting as an "L1VH" partition. This is a new scenario very
similar to root partition where the mshv_root driver can be used to
create and manage guest partitions.
It mostly works the same as root partition, but there are some
differences in how various features are handled. hv_l1vh_partition()
is introduced to handle these cases. Add hv_parent_partition()
which returns true for either case, replacing some hv_root_partition()
checks.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
There are no users for those functions, remove them.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1746492997-4599-6-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1746492997-4599-6-git-send-email-longli@linuxonhyperv.com>
To run in the VTL mode, Hyper-V drivers have to know what
VTL the system boots in, and the arm64/hyperv code does not
have the means to compute that.
Refactor the code to hoist the function that detects VTL,
make it arch-neutral to be able to employ it to get the VTL
on arm64.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/20250428210742.435282-5-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-5-romank@linux.microsoft.com>
Add mshv_handler() to process messages related to managing guest
partitions such as intercepts, doorbells, and scheduling messages.
In a (non-nested) root partition, the same interrupt vector is shared
between the vmbus and mshv_root drivers.
Introduce a stub for mshv_handler() and call it in
sysvec_hyperv_callback alongside vmbus_handler().
Even though both handlers will be called for every Hyper-V interrupt,
the messages for each driver are delivered to different offsets
within the SYNIC message page, so they won't step on each other.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-9-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-9-git-send-email-nunodasneves@linux.microsoft.com>
Factor out the check for enabling auto eoi, to be reused in root
partition code.
No functional changes.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-5-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-5-git-send-email-nunodasneves@linux.microsoft.com>
These non-nested msr and fast hypercall functions are present in x86,
but they must be available in both architectures for the root partition
driver code.
While at it, remove the redundant 'extern' keywords from the
hv_do_hypercall() variants in asm-generic/mshyperv.h.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-4-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-4-git-send-email-nunodasneves@linux.microsoft.com>
Extend the "ms_hyperv_info" structure to include a new field,
"ext_features", for capturing extended Hyper-V features.
Update the "ms_hyperv_init_platform" function to retrieve these features
using the cpuid instruction and include them in the informational output.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1741980536-3865-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-3-git-send-email-nunodasneves@linux.microsoft.com>
Introduce hv_status_printk() macros as a convenience to log hypercall
errors, formatting them with the status code (HV_STATUS_*) as a raw hex
value and also as a string, which saves some time while debugging.
Create a table of HV_STATUS_ codes with strings and mapped errnos, and
use it for hv_result_to_string() and hv_result_to_errno().
Use the new hv_status_printk()s in hv_proc.c, hyperv-iommu.c, and
irqdomain.c hypercalls to aid debugging in the root partition.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-2-git-send-email-nunodasneves@linux.microsoft.com>
CONFIG_MSHV_ROOT allows kernels built to run as a normal Hyper-V guest
to exclude the root partition code, which is expected to grow
significantly over time.
This option is a tristate so future driver code can be built as a
(m)odule, allowing faster development iteration cycles.
If CONFIG_MSHV_ROOT is disabled, don't compile hv_proc.c, and stub
hv_root_partition() to return false unconditionally. This allows the
compiler to optimize away root partition code blocks since they will
be disabled at compile time.
In the case of booting as root partition *without* CONFIG_MSHV_ROOT
enabled, print a critical error (the kernel will likely crash).
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740167795-13296-4-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740167795-13296-4-git-send-email-nunodasneves@linux.microsoft.com>
Introduce hv_curr_partition_type to store the partition type
as an enum.
Right now this is limited to guest or root partition, but there will
be other kinds in future and the enum is easily extensible.
Set up hv_curr_partition_type early in Hyper-V initialization with
hv_identify_partition_type(). hv_root_partition() just queries this
value, and shouldn't be called before that.
Making this check into a function sets the stage for adding a config
option to gate the compilation of root partition code. In particular,
hv_root_partition() can be stubbed out always be false if root
partition support isn't desired.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740167795-13296-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740167795-13296-3-git-send-email-nunodasneves@linux.microsoft.com>
Return linux-friendly error codes from hypercall helper functions,
which allows them to be used more flexibly.
Introduce hv_result_to_errno() for this purpose, which also handles
the special value U64_MAX returned from hv_do_hypercall().
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740167795-13296-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740167795-13296-2-git-send-email-nunodasneves@linux.microsoft.com>
These helpers are not specific to x86_64 and will be needed by common code.
Remove some unnecessary #includes.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Link: https://lore.kernel.org/r/1738955002-20821-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1738955002-20821-3-git-send-email-nunodasneves@linux.microsoft.com>
Move hv_current_partition_id and hv_get_partition_id() to hv_common.c,
and call hv_get_partition_id() on arm64 in hyperv_init(). These aren't
specific to x86_64 and will be needed by common code.
Set hv_current_partition_id to HV_PARTITION_ID_SELF by default.
Rename struct hv_get_partition_id to hv_output_get_partition_id, to
make it distinct from the function hv_get_partition_id(), and match
the original Hyper-V struct name.
Remove the BUG()s. Failing to get the id need not crash the machine.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1738955002-20821-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1738955002-20821-2-git-send-email-nunodasneves@linux.microsoft.com>
Switch to using hvhdk.h everywhere in the kernel. This header
includes all the new Hyper-V headers in include/hyperv, which form a
superset of the definitions found in hyperv-tlfs.h.
This makes it easier to add new Hyper-V interfaces without being
restricted to those in the TLFS doc (reflected in hyperv-tlfs.h).
To be more consistent with the original Hyper-V code, the names of
some definitions are changed slightly. Update those where needed.
Update comments in mshyperv.h files to point to include/hyperv for
adding new definitions.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/1732577084-2122-5-git-send-email-nunodasneves@linux.microsoft.com
Link: https://lore.kernel.org/r/20250108222138.1623703-3-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmYYYPkTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXnxhB/4/8c7lFT53VbujFmVA5sNvpP5Ji5Xg
ERhVID7tzDyaVRPr+tpPJIW0Oj/t34SH9seoTYCBCM/UABWe/Gxceg2JaoOzIx+l
LHi73T4BBaqExiXbCCFj8N7gLO5P4Xz6ZZRgwHws1KmMXsiWYmYsbv36eSv9x6qK
+z/n6p9/ubKFNj2/vsvfiGmY0XHayD3NM4Y4toMbYE/tuRT8uZ7D5sqWdRf+UhW/
goRDA5qppeSfuaQu2LNVoz1e6wRmeJFv8OHgaPvQqAjTRLzPwwss28HICmKc8gh3
HDDUUJCHSs1XItSGDFip6rIFso5X/ZHO0d6pV75hOKCisd7lV0qH6NIZ
=k62H
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20240411' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Some cosmetic changes (Erni Sri Satya Vennela, Li Zhijian)
- Introduce hv_numa_node_to_pxm_info() (Nuno Das Neves)
- Fix KVP daemon to handle IPv4 and IPv6 combination for keyfile format
(Shradha Gupta)
- Avoid freeing decrypted memory in a confidential VM (Rick Edgecombe
and Michael Kelley)
* tag 'hyperv-fixes-signed-20240411' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted
uio_hv_generic: Don't free decrypted memory
hv_netvsc: Don't free decrypted memory
Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl
Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails
hv/hv_kvp_daemon: Handle IPv4 and Ipv6 combination for keyfile format
hv: vmbus: Convert sprintf() family to sysfs_emit() family
mshyperv: Introduce hv_numa_node_to_pxm_info()
x86/hyperv: Cosmetic changes for hv_apic.c
Factor out logic for converting numa node to hv_proximity_domain_info
into a helper function.
Change hv_proximity_domain_info to a struct to improve readability.
While at it, rename hv_add_logical_processor_* structs to the correct
hv_input_/hv_output_ prefix, and remove the flags field which is not
present in the ABI.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1711141826-9458-1-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1711141826-9458-1-git-send-email-nunodasneves@linux.microsoft.com>
A Hyper-V host provides its guest VMs with entropy in a custom ACPI
table named "OEM0". The entropy bits are updated each time Hyper-V
boots the VM, and are suitable for seeding the Linux guest random
number generator (rng). See a brief description of OEM0 in [1].
Generation 2 VMs on Hyper-V use UEFI to boot. Existing EFI code in
Linux seeds the rng with entropy bits from the EFI_RNG_PROTOCOL.
Via this path, the rng is seeded very early during boot with good
entropy. The ACPI OEM0 table provided in such VMs is an additional
source of entropy.
Generation 1 VMs on Hyper-V boot from BIOS. For these VMs, Linux
doesn't currently get any entropy from the Hyper-V host. While this
is not fundamentally broken because Linux can generate its own entropy,
using the Hyper-V host provided entropy would get the rng off to a
better start and would do so earlier in the boot process.
Improve the rng seeding for Generation 1 VMs by having Hyper-V specific
code in Linux take advantage of the OEM0 table to seed the rng. For
Generation 2 VMs, use the OEM0 table to provide additional entropy
beyond the EFI_RNG_PROTOCOL. Because the OEM0 table is custom to
Hyper-V, parse it directly in the Hyper-V code in the Linux kernel
and use add_bootloader_randomness() to add it to the rng. Once the
entropy bits are read from OEM0, zero them out in the table so
they don't appear in /sys/firmware/acpi/tables/OEM0 in the running
VM. The zero'ing is done out of an abundance of caution to avoid
potential security risks to the rng. Also set the OEM0 data length
to zero so a kexec or other subsequent use of the table won't try
to use the zero'ed bits.
[1] https://download.microsoft.com/download/1/c/9/1c9813b8-089c-4fef-b2ad-ad80e79403ba/Whitepaper%20-%20The%20Windows%2010%20random%20number%20generation%20infrastructure.pdf
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20240318155408.216851-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240318155408.216851-1-mhklinux@outlook.com>
Introduce x86_64 and arm64 functions to get the hypervisor version
information and store it in a structure for simpler parsing.
Use the new function to get and parse the version at boot time. While at
it, move the printing code to hv_common_init() so it is not duplicated.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1709852618-29110-1-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1709852618-29110-1-git-send-email-nunodasneves@linux.microsoft.com>
The HV_REGISTER_ are used as arguments to hv_set/get_register(), which
delegate to arch-specific mechanisms for getting/setting synthetic
Hyper-V MSRs.
On arm64, HV_REGISTER_ defines are synthetic VP registers accessed via
the get/set vp registers hypercalls. The naming matches the TLFS
document, although these register names are not specific to arm64.
However, on x86 the prefix HV_REGISTER_ indicates Hyper-V MSRs accessed
via rdmsrl()/wrmsrl(). This is not consistent with the TLFS doc, where
HV_REGISTER_ is *only* used for used for VP register names used by
the get/set register hypercalls.
To fix this inconsistency and prevent future confusion, change the
arch-generic aliases used by callers of hv_set/get_register() to have
the prefix HV_MSR_ instead of HV_REGISTER_.
Use the prefix HV_X64_MSR_ for the x86-only Hyper-V MSRs. On x86, the
generic HV_MSR_'s point to the corresponding HV_X64_MSR_.
Move the arm64 HV_REGISTER_* defines to the asm-generic hyperv-tlfs.h,
since these are not specific to arm64. On arm64, the generic HV_MSR_'s
point to the corresponding HV_REGISTER_.
While at it, rename hv_get/set_registers() and related functions to
hv_get/set_msr(), hv_get/set_nested_msr(), etc. These are only used for
Hyper-V MSRs and this naming makes that clear.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1708440933-27125-1-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1708440933-27125-1-git-send-email-nunodasneves@linux.microsoft.com>
Use the hole prior shared_gpa_boundary to store the result of get_vtl.
This reduces the size by 8 bytes.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230922192840.3886-1-olaf@aepfle.de
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmT0EE8THHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXg5FCACGJ6n2ikhtRHAENHIVY/mTh+HbhO07
ERzjADfqKF43u1Nt9cslgT4MioqwLjQsAu/A0YcJgVxVSOtg7dnbDmurRAjrGT/3
iKqcVvnaiwSV44TkF8evpeMttZSOg29ImmpyQjoZJJvDMfpxleEK53nuKB9EsjKL
Mz/0gSPoNc79bWF+85cVhgPnGIh9nBarxHqVsuWjMhc+UFhzjf9mOtk34qqPfJ1Q
4RsKGEjkVkeXoG6nGd6Gl/+8WoTpenOZQLchhInocY+k9FlAzW1Kr+ICLDx+Topw
8OJ6fv2rMDOejT9aOaA3/imf7LMer0xSUKb6N0sqQAQX8KzwcOYyKtQJ
=rC/v
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Support for SEV-SNP guests on Hyper-V (Tianyu Lan)
- Support for TDX guests on Hyper-V (Dexuan Cui)
- Use SBRM API in Hyper-V balloon driver (Mitchell Levy)
- Avoid dereferencing ACPI root object handle in VMBus driver (Maciej
Szmigiero)
- A few misecllaneous fixes (Jiapeng Chong, Nathan Chancellor, Saurabh
Sengar)
* tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits)
x86/hyperv: Remove duplicate include
x86/hyperv: Move the code in ivm.c around to avoid unnecessary ifdef's
x86/hyperv: Remove hv_isolation_type_en_snp
x86/hyperv: Use TDX GHCI to access some MSRs in a TDX VM with the paravisor
Drivers: hv: vmbus: Bring the post_msg_page back for TDX VMs with the paravisor
x86/hyperv: Introduce a global variable hyperv_paravisor_present
Drivers: hv: vmbus: Support >64 VPs for a fully enlightened TDX/SNP VM
x86/hyperv: Fix serial console interrupts for fully enlightened TDX guests
Drivers: hv: vmbus: Support fully enlightened TDX guests
x86/hyperv: Support hypercalls for fully enlightened TDX guests
x86/hyperv: Add hv_isolation_type_tdx() to detect TDX guests
x86/hyperv: Fix undefined reference to isolation_type_en_snp without CONFIG_HYPERV
x86/hyperv: Add missing 'inline' to hv_snp_boot_ap() stub
hv: hyperv.h: Replace one-element array with flexible-array member
Drivers: hv: vmbus: Don't dereference ACPI root object handle
x86/hyperv: Add hyperv-specific handling for VMMCALL under SEV-ES
x86/hyperv: Add smp support for SEV-SNP guest
clocksource: hyper-v: Mark hyperv tsc page unencrypted in sev-snp enlightened guest
x86/hyperv: Use vmmcall to implement Hyper-V hypercall in sev-snp enlightened guest
drivers: hv: Mark percpu hvcall input arg page unencrypted in SEV-SNP enlightened guest
...
In ms_hyperv_init_platform(), do not distinguish between a SNP VM with
the paravisor and a SNP VM without the paravisor.
Replace hv_isolation_type_en_snp() with
!ms_hyperv.paravisor_present && hv_isolation_type_snp().
The hv_isolation_type_en_snp() in drivers/hv/hv.c and
drivers/hv/hv_common.c can be changed to hv_isolation_type_snp() since
we know !ms_hyperv.paravisor_present is true there.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-10-decui@microsoft.com
A fully enlightened TDX guest on Hyper-V (i.e. without the paravisor) only
uses the GHCI call rather than hv_hypercall_pg. Do not initialize
hypercall_pg for such a guest.
In hv_common_cpu_init(), the hyperv_pcpu_input_arg page needs to be
decrypted in such a guest.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-3-decui@microsoft.com
No logic change to SNP/VBS guests.
hv_isolation_type_tdx() will be used to instruct a TDX guest on Hyper-V to
do some TDX-specific operations, e.g. for a fully enlightened TDX guest
(i.e. without the paravisor), hv_do_hypercall() should use
__tdx_hypercall() and such a guest on Hyper-V should handle the Hyper-V
Event/Message/Monitor pages specially.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-2-decui@microsoft.com
SEV-SNP guests on Hyper-V can run at multiple Virtual Trust
Levels (VTL). During boot, get the VTL at which we're running
using the GET_VP_REGISTERs hypercall, and save the value
for future use. Then during VMBus initialization, set the VTL
with the saved value as required in the VMBus init message.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-3-ltykernel@gmail.com
Currently hv_free_hyperv_page() takes an unsigned long argument, which
is inconsistent with the void * return value from the corresponding
hv_alloc_hyperv_page() function and variants. This creates unnecessary
extra casting.
Change the hv_free_hyperv_page() argument type to void *.
Also remove redundant casts from invocations of
hv_alloc_hyperv_page() and variants.
Signed-off-by: Kameron Carr <kameroncarr@linux.microsoft.com>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1687558189-19734-1-git-send-email-kameroncarr@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When copying CPUs from a Linux cpumask to a Hyper-V VPset,
cpumask_to_vpset() currently has a "_noself" variant that doesn't copy
the current CPU to the VPset. Generalize this variant by replacing it
with a "_skip" variant having a callback function that is invoked for
each CPU to decide if that CPU should be copied. Update the one caller
of cpumask_to_vpset_noself() to use the new "_skip" variant instead.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1679922967-26582-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
With changes to how Hyper-V guest VMs flip memory between private
(encrypted) and shared (decrypted), creating a second kernel virtual
mapping for shared memory is no longer necessary. Everything needed
for the transition to shared is handled by set_memory_decrypted().
As such, remove the code to create and manage the second
mapping for the pre-allocated send and recv buffers. This mapping
is the last user of hv_map_memory()/hv_unmap_memory(), so delete
these functions as well. Finally, hv_map_memory() is the last
user of vmap_pfn() in Hyper-V guest code, so remove the Kconfig
selection of VMAP_PFN.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/1679838727-87310-11-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Hyper-V guests on AMD SEV-SNP hardware have the option of using the
"virtual Top Of Memory" (vTOM) feature specified by the SEV-SNP
architecture. With vTOM, shared vs. private memory accesses are
controlled by splitting the guest physical address space into two
halves.
vTOM is the dividing line where the uppermost bit of the physical
address space is set; e.g., with 47 bits of guest physical address
space, vTOM is 0x400000000000 (bit 46 is set). Guest physical memory is
accessible at two parallel physical addresses -- one below vTOM and one
above vTOM. Accesses below vTOM are private (encrypted) while accesses
above vTOM are shared (decrypted). In this sense, vTOM is like the
GPA.SHARED bit in Intel TDX.
Support for Hyper-V guests using vTOM was added to the Linux kernel in
two patch sets[1][2]. This support treats the vTOM bit as part of
the physical address. For accessing shared (decrypted) memory, these
patch sets create a second kernel virtual mapping that maps to physical
addresses above vTOM.
A better approach is to treat the vTOM bit as a protection flag, not
as part of the physical address. This new approach is like the approach
for the GPA.SHARED bit in Intel TDX. Rather than creating a second kernel
virtual mapping, the existing mapping is updated using recently added
coco mechanisms.
When memory is changed between private and shared using
set_memory_decrypted() and set_memory_encrypted(), the PTEs for the
existing kernel mapping are changed to add or remove the vTOM bit in the
guest physical address, just as with TDX. The hypercalls to change the
memory status on the host side are made using the existing callback
mechanism. Everything just works, with a minor tweak to map the IO-APIC
to use private accesses.
To accomplish the switch in approach, the following must be done:
* Update Hyper-V initialization to set the cc_mask based on vTOM
and do other coco initialization.
* Update physical_mask so the vTOM bit is no longer treated as part
of the physical address
* Remove CC_VENDOR_HYPERV and merge the associated vTOM functionality
under CC_VENDOR_AMD. Update cc_mkenc() and cc_mkdec() to set/clear
the vTOM bit as a protection flag.
* Code already exists to make hypercalls to inform Hyper-V about pages
changing between shared and private. Update this code to run as a
callback from __set_memory_enc_pgtable().
* Remove the Hyper-V special case from __set_memory_enc_dec()
* Remove the Hyper-V specific call to swiotlb_update_mem_attributes()
since mem_encrypt_init() will now do it.
* Add a Hyper-V specific implementation of the is_private_mmio()
callback that returns true for the IO-APIC and vTPM MMIO addresses
[1] https://lore.kernel.org/all/20211025122116.264793-1-ltykernel@gmail.com/
[2] https://lore.kernel.org/all/20211213071407.314309-1-ltykernel@gmail.com/
[ bp: Touchups. ]
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/1679838727-87310-7-git-send-email-mikelley@microsoft.com
Detect if Linux is running as a nested hypervisor in the root
partition for Microsoft Hypervisor, using flags provided by MSHV.
Expose a new variable hv_nested that is used later for decisions
specific to the nested use case.
Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/8e3e7112806e81d2292a66a56fe547162754ecea.1672639707.git.jinankjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
It may not come clear from where the magical '64' value used in
__cpumask_to_vpset() come from. Moreover, '64' means both the maximum
sparse bank number as well as the number of vCPUs per bank. Add defines
to make things clear. These defines are also going to be used by KVM.
No functional change.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-15-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The generate_guest_id function is more suitable for use after the
following modifications.
1. The return value of the function is modified to u64.
2. Remove the d_info1 and d_info2 parameters from the function, keep the
u64 type kernel_version parameter.
3. Rename the function to make it clearly a Hyper-V related function,
and modify it to hv_generate_guest_id.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220928064046.3545-1-kunyu@nfschina.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
VMbus synthetic devices are not represented in the ACPI DSDT -- only
the top level VMbus device is represented. As a result, on ARM64
coherence information in the _CCA method is not specified for
synthetic devices, so they default to not hardware coherent.
Drivers for some of these synthetic devices have been recently
updated to use the standard DMA APIs, and they are incurring extra
overhead of unneeded software coherence management.
Fix this by propagating coherence information from the VMbus node
in ACPI to the individual synthetic devices. There's no effect on
x86/x64 where devices are always hardware coherent.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1648138492-2191-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The percpu variables hyperv_pcpu_input_arg and hyperv_pcpu_output_arg
have been incorrectly defined since their inception. The __percpu
qualifier should be associated with the void * (i.e., a pointer), not
with the target of the pointer. This distinction makes no difference
to gcc and the generated code, but sparse correctly complains. Fix
the definitions in the interest of general correctness in addition
to making sparse happy.
No functional change.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1640662315-22260-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
In Isolation VM, all shared memory with host needs to mark visible
to host via hvcall. vmbus_establish_gpadl() has already done it for
netvsc rx/tx ring buffer. The page buffer used by vmbus_sendpacket_
pagebuffer() stills need to be handled. Use DMA API to map/umap
these memory during sending/receiving packet and Hyper-V swiotlb
bounce buffer dma address will be returned. The swiotlb bounce buffer
has been masked to be visible to host during boot up.
rx/tx ring buffer is allocated via vzalloc() and they need to be
mapped into unencrypted address space(above vTOM) before sharing
with host and accessing. Add hv_map/unmap_memory() to map/umap rx
/tx ring buffer.
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211213071407.314309-6-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
hyperv provides ghcb hvcall to handle VMBus
HVCALL_SIGNAL_EVENT and HVCALL_POST_MESSAGE
msg in SNP Isolation VM. Add such support.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-8-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Hyperv provides GHCB protocol to write Synthetic Interrupt
Controller MSR registers in Isolation VM with AMD SEV SNP
and these registers are emulated by hypervisor directly.
Hyperv requires to write SINTx MSR registers twice. First
writes MSR via GHCB page to communicate with hypervisor
and then writes wrmsr instruction to talk with paravisor
which runs in VMPL0. Guest OS ID MSR also needs to be set
via GHCB page.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-7-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Hyper-V exposes shared memory boundary via cpuid
HYPERV_CPUID_ISOLATION_CONFIG and store it in the
shared_gpa_boundary of ms_hyperv struct. This prepares
to share memory with host for SNP guest.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-3-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Hyperv exposes GHCB page via SEV ES GHCB MSR for SNP guest
to communicate with hypervisor. Map GHCB page for all
cpus to read/write MSR register and submit hvcall request
via ghcb page.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-2-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
This is a new variant which removes `self' cpu from the vpset. It will
be used in Hyper-V enlightened IPI code.
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210910185714.299411-2-wei.liu@kernel.org
Hyper-V clock/timer code in hyperv_timer.c is mostly independent from
other VMbus drivers, but building for ARM64 without hyperv_timer.c
shows some remaining entanglements. A default implementation of
hv_read_reference_counter can just read a Hyper-V synthetic register
and be independent of hyperv_timer.c, so move this code out and into
hv_common.c. Then it can be used by the timesync driver even if
hyperv_timer.c isn't built on a particular architecture. If
hyperv_timer.c *is* built, it can override with a faster implementation.
Also provide stubs for stimer functions called by the VMbus driver when
hyperv_timer.c isn't built.
No functional changes.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626220906-22629-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The code to allocate and initialize the hv_vp_index array is
architecture neutral. Similarly, the code to allocate and
populate the hypercall input and output arg pages is architecture
neutral. Move both sets of code out from arch/x86 and into
utility functions in drivers/hv/hv_common.c that can be shared
by Hyper-V initialization on ARM64.
No functional changes. However, the allocation of the hypercall
input and output arg pages is done differently so that the
size is always the Hyper-V page size, even if not the same as
the guest page size (such as with ARM64's 64K page size).
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626287687-2045-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
