- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are
the same prototypes in asm/kprobes.h for some architectures, but
some of them are missing the prototype and it causes a warning.
So move the prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return
but if $retval exists, it will be converted to %return silently.
This finds that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters
of __kprobe_event_gen_cmd_start() to be consistent with the
argument list of the function.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmVOwAQbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bItMH/0F/vyiirgLrRVvQ+5Tr
Hm32oc1BQzxnQ0+9bjzk3r90KYk5cysBEEqxKzgxq9/RsJdyCczQUpxYehU0BoZT
1B4pB5eQ0DwcdGAVk4TyBRYVBb3uhCyyZNXv+F60AsO8i87fHHoJXT9SoKK+Vgx4
MAklE1gnxFFlRoYCBQpks89NajRx6n3aEL4/oXO3WYSrv+H2WGtZamB+RhpufkDx
Qx5TkIGnjulcW6J5m7Px5N3z9AX00SbfooZHAae3fqsek5RPNecfc1/WiANNXrSm
SYsG/i1jcHVvmk2YmCVokVLPKzhCOsKIuiW91rBu/Tu6lqiJmC+fxWxuZqAdXFUi
+kw=
=uymB
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
same prototypes in asm/kprobes.h for some architectures, but some of
them are missing the prototype and it causes a warning. So move the
prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return but if
$retval exists, it will be converted to %return silently. This finds
that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters of
__kprobe_event_gen_cmd_start() to be consistent with the argument
list of the function.
* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix the order of argument descriptions
tracing: fprobe-event: Fix to check tracepoint event and return
kprobes: unify kprobes_exceptions_nofify() prototypes
lib: test_objpool: make global variables static
Documentation: tracing: Add a note about argument and retval access
- fix double free and resource leaks in imsttfb
- lots of remove callback cleanups and section mismatch fixes in omapfb,
amifb and atmel_lcdfb
- error code fix and memparse simplification in omapfb
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZU6s8AAKCRD3ErUQojoP
X1bVAQCzMS+ZEuKKUGKeoUKvQjHe6wWPopgnnWlzbGLunTSdFAEApDLjXOT9QYez
iHbEDcLNfwhGURIu0qOQDQ6NEe9ayQE=
=0D+E
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
- fix double free and resource leaks in imsttfb
- lots of remove callback cleanups and section mismatch fixes in
omapfb, amifb and atmel_lcdfb
- error code fix and memparse simplification in omapfb
* tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits)
fbdev: fsl-diu-fb: mark wr_reg_wa() static
fbdev: amifb: Convert to platform remove callback returning void
fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
fbdev: hyperv_fb: fix uninitialized local variable use
fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
fbdev: omapfb/tfp410: Convert to platform remove callback returning void
fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
fbdev: omapfb/opa362: Convert to platform remove callback returning void
fbdev: omapfb/hdmi: Convert to platform remove callback returning void
fbdev: omapfb/dvi: Convert to platform remove callback returning void
fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
fbdev: omapfb/dpi: Convert to platform remove callback returning void
fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
fbdev: atmel_lcdfb: Convert to platform remove callback returning void
fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
...
The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.
int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
const char *name, const char *loc, ...)
Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/
Fixes: 2a588dd1d5d6 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
- big pile of amd fixes, but mostly hw support newly added in 6.7
- i915 fixes, mostly minor things
- qxl memory leak fix
- vc4 uaf fix in mock helpers
- syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE
-----BEGIN PGP SIGNATURE-----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=l45e
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Dave's VPN to the big machine died, so it's on me to do fixes pr this
and next week while everyone else is at plumbers.
- big pile of amd fixes, but mostly for hw support newly added in 6.7
- i915 fixes, mostly minor things
- qxl memory leak fix
- vc4 uaf fix in mock helpers
- syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"
* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
drm/amdgpu: fix error handling in amdgpu_vm_init
drm/amdgpu: Fix possible null pointer dereference
drm/amdgpu: move UVD and VCE sched entity init after sched init
drm/amdgpu: move kfd_resume before the ip late init
drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
drm/amdgpu: fix software pci_unplug on some chips
drm/amd/display: remove duplicated argument
drm/amdgpu: correct mca debugfs dump reg list
drm/amdgpu: correct acclerator check architecutre dump
drm/amdgpu: add pcs xgmi v6.4.0 ras support
drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
drm/amdgpu: disable smu v13.0.6 mca debug mode by default
drm/amdgpu: Support multiple error query modes
drm/amdgpu: refine smu v13.0.6 mca dump driver
drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
drm: amd: Resolve Sphinx unexpected indentation warning
...
- Move the MediaTek GIC quirk handling from irqchip to core. Before the
merging window commit 44bd78dd2b88 ("irqchip/gic-v3: Disable pseudo
NMIs on MediaTek devices w/ firmware issues") temporarily addressed
this issue. Fixed now at a deeper level in the arch code.
- Reject events meant for other PMUs in the CoreSight PMU driver,
otherwise some of the core PMU events would disappear.
- Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
causing some events to be invisible.
- Remove duplicate declaration of __arm64_sys##name following the patch
to avoid prototype warning for syscalls.
- Typos in the elf_hwcap documentation.
-----BEGIN PGP SIGNATURE-----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=c+Yt
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
MediaTek firmware:
- Move the MediaTek GIC quirk handling from irqchip to core. Before
the merging window commit 44bd78dd2b88 ("irqchip/gic-v3: Disable
pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
addressed this issue. Fixed now at a deeper level in the arch code
- Reject events meant for other PMUs in the CoreSight PMU driver,
otherwise some of the core PMU events would disappear
- Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
causing some events to be invisible
- Remove duplicate declaration of __arm64_sys##name following the
patch to avoid prototype warning for syscalls
- Typos in the elf_hwcap documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/syscall: Remove duplicate declaration
Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
arm64: Move MediaTek GIC quirk handling from irqchip to core
arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
perf: arm_cspmu: Reject events meant for other PMUs
Documentation/arm64: Fix typos in elf_hwcaps
A collection of fixes for RC1. Majority of changes are various
ASoC driver-specific small fixes and usual HD-audio quirks, while
there are a couple of core changes: a fix in ALSA core procfs code
to avoid deadlocks at disconnection and an ASoC core fix for DAPM
clock widgets.
-----BEGIN PGP SIGNATURE-----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=6iW2
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes for rc1.
The majority of changes are various ASoC driver-specific small fixes
and usual HD-audio quirks, while there are a couple of core changes: a
fix in ALSA core procfs code to avoid deadlocks at disconnection and
an ASoC core fix for DAPM clock widgets"
* tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
OSS: dmasound/paula: Convert to platform remove callback returning void
ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus
ALSA: info: Fix potential deadlock at disconnection
ASoC: nau8540: Add self recovery to improve capture quility
ALSA: hda/realtek: Add support dual speaker for Dell
ALSA: hda: Add ASRock X670E Taichi to denylist
ALSA: hda/realtek: Add quirk for ASUS UX7602ZM
ASoC: SOF: sof-client: trivial: fix comment typo
ASoC: dapm: fix clock get name
ASoC: hdmi-codec: register hpd callback on component probe
ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages
ASoC: da7219: Improve system suspend and resume handling
ASoC: codecs: Modify macro value error
ASoC: codecs: Modify the wrong judgment of re value
ASoC: codecs: Modify the maximum value of calib
ASoC: amd: acp: fix for i2s mode register field update
ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb()
ASoC: rt712-sdca: fix speaker route missing issue
ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF
ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings
A couple of fixes that came in during the merge window, one Kconfig
dependency fix and another fix for a long standing issue where in the
case where a sync transfer races with system suspend.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmVONkAACgkQJNaLcl1U
h9CjXAf+INeTPAMe6N9eR4IQ8Q+92h2ST1P8YlZ7Mr8BUgEieXVrnlk9CCtUqymy
JBG3NmHnoQEnDfQ6AXB5dW9ALtOOwxI4PbCIRaaQ1pV5Xu6LBE/HKIvYdSUOevvx
LTXeUKt60TD+75AoKYx59Eu3SVQVQr+RoK6GFxZOPh0ixgpIBq9sZ03bXBQFyXCA
xvvTjqc/olMK8V35ZUjmERR+/0qi7dv9gLCuPXDcMzyaAMZRcX5IfD4WUhfmIEdD
diqiYEebV3EQ0Qzl72C3gYuANVUJ3mRNpDoa2ITRtpspCk0G2ghe8nuRVCZQ/Qyq
C2F8n2p9UKDMPhay6vbK6LVr/1Fi1A==
=p/JY
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fixes that came in during the merge window: one Kconfig
dependency fix and another fix for a long standing issue where a sync
transfer races with system suspend"
* tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Fix null dereference on suspend
spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies
- Fix broken cache-flush support for Micron eMMCs
- Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
MMC host:
- sdhci_am654: Fix TAP value parsing for legacy speed mode
- sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750
- vub300: Fix an error path in probe
-----BEGIN PGP SIGNATURE-----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=EohY
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix broken cache-flush support for Micron eMMCs
- Revert 'mmc: core: Capture correct oemid-bits for eMMC cards'
MMC host:
- sdhci_am654: Fix TAP value parsing for legacy speed mode
- sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750
- vub300: Fix an error path in probe"
* tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER
mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER
Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
mmc: vub300: fix an error code
mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A
mmc: sdhci_am654: fix start loop index for TAP value parsing
This contains two very small fixes that I failed to include in the main
pull request for v6.7-rc1.
-----BEGIN PGP SIGNATURE-----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=Rrdu
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"This contains two very small fixes that I failed to include in the
main pull request"
* tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Fix double shift bug
pwm: samsung: Fix a bit test in pwm_samsung_resume()
-----BEGIN PGP SIGNATURE-----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=JGJN
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Mostly just a few fixes and cleanups caused by the read multishot
support.
Outside of that, a stable fix for how a connect retry is done"
* tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux:
io_uring: do not clamp read length for multishot read
io_uring: do not allow multishot read to set addr or len
io_uring: indicate if io_kbuf_recycle did recycle anything
io_uring/rw: add separate prep handler for fixed read/write
io_uring/rw: add separate prep handler for readv/writev
io_uring/net: ensure socket is marked connected on connect retry
io_uring/rw: don't attempt to allocate async data if opcode doesn't need it
- Revert a change in ata_pci_shutdown_one() to suspend disks on
shutdown as this is now done using the manage_shutdown scsi device
flag (from me).
- Change the pata_falcon and pata_gayle drivers to stop using
module_platform_driver_probe(). This makes these drivers more inline
with all other drivers (allowing bind/unbind) and suppress a
compilation warning (from Uwe).
- Convert the pata_falcon and pata_gayle drivers to the new
.remove_new() void-return callback. These 2 drivers are the last ones
needing this change (from Uwe).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZU1mOAAKCRDdoc3SxdoY
doI2AQClFXqNKQENya8Hx8MlJ5T9tNv9vVM9iriwcKIPv8ApNgEA0giBSc99SX/T
qHzZBkUmA5A+SXs8Lg1yHD0PvlmnkQs=
=Cgwe
-----END PGP SIGNATURE-----
Merge tag 'ata-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Revert a change in ata_pci_shutdown_one() to suspend disks on
shutdown as this is now done using the manage_shutdown scsi device
flag (me)
- Change the pata_falcon and pata_gayle drivers to stop using
module_platform_driver_probe(). This makes these drivers more inline
with all other drivers (allowing bind/unbind) and suppress a
compilation warning (Uwe)
- Convert the pata_falcon and pata_gayle drivers to the new
.remove_new() void-return callback. These 2 drivers are the last ones
needing this change (Uwe)
* tag 'ata-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_gayle: Convert to platform remove callback returning void
ata: pata_falcon: Convert to platform remove callback returning void
ata: pata_gayle: Stop using module_platform_driver_probe()
ata: pata_falcon: Stop using module_platform_driver_probe()
ata: libata-core: Fix ata_pci_shutdown_one()
- don't leave pages decrypted for DMA in encrypted memory setups linger
around on failure (Petr Tesarik)
- fix an out of bounds access in the new dynamic swiotlb code (Petr Tesarik)
- fix dma_addressing_limited for systems with weird physical memory layouts
(Jia He)
-----BEGIN PGP SIGNATURE-----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=6pQM
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.7-2023-11-10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- don't leave pages decrypted for DMA in encrypted memory setups linger
around on failure (Petr Tesarik)
- fix an out of bounds access in the new dynamic swiotlb code (Petr
Tesarik)
- fix dma_addressing_limited for systems with weird physical memory
layouts (Jia He)
* tag 'dma-mapping-6.7-2023-11-10' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC
dma-mapping: fix dma_addressing_limited() if dma_range_map can't cover all system RAM
dma-mapping: move dma_addressing_limited() out of line
swiotlb: do not free decrypted pages if dynamic
-----BEGIN PGP SIGNATURE-----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=LI/7
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20231109' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
"We've got two small patches to correct the default return
value of two LSM hooks: security_vm_enough_memory_mm() and
security_inode_getsecctx()"
* tag 'lsm-pr-20231109' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: fix default return value for inode_getsecctx
lsm: fix default return value for vm_enough_memory
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmVN1/gACgkQiiy9cAdy
T1HFlAv9Ejt62uSKquLYpa8OQPUS0L4rxW3RvpfsAdSsnnDWLAeuVPPkTOqTHnw7
0tifp5h9cS8qYsWvACb5MdWPc71J91QU22tMmd8eeW++9IsBNOX/5Ph635PBppxC
Q0FL+G2xQ/vlqi0QbkR4SdI7vTvU9LRvxNpqRHgjs4W45r1QC6e9LJ3ncJf1aKfz
k2v90M0Oo++YXztLLYPapbtlHYc9c/Xufu6HPbfWH/Ryc2N2CxQ6Z3Kp9RGP5PGk
gT4SBVR69VfWHK1JK8dqPkbiaiEyRUxhPVqTCMdVzFbFAhczQbcqa8Ufz9nVXfnO
P98cq9c2/NF7JUYQVs6V4kZa74kD8osnuKud6706teM31Zr9OZlq2keyV2Zx1m6I
Niwwzdn/lXfT8GCIDE20KNCAdV3y1vu5yQkg3Mnv0Yj1VawyHKlAdYeQ0So5s4Sm
B5bXnXr5wgd4ughGYDhO5gCwSn6L8CGwkzQ+bkN4FdjBWPMKVAyuCQL/0UglJ2LK
KuQxhCDE
=YnRz
-----END PGP SIGNATURE-----
Merge tag '6.7-rc-smb3-server-part2' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- slab out of bounds fix in ACL handling
- fix malformed request oops
- minor doc fix
* tag '6.7-rc-smb3-server-part2' of git://git.samba.org/ksmbd:
ksmbd: handle malformed smb1 message
ksmbd: fix kernel-doc comment of ksmbd_vfs_kern_path_locked()
ksmbd: fix slab out of bounds write in smb_inherit_dacl()
- support for idmapped mounts in CephFS (Christian Brauner, Alexander
Mikhalitsyn). The series was originally developed by Christian and
later picked up and brought over the finish line by Alexander, who
also contributed an enabler on the MDS side (separate owner_{u,g}id
fields on the wire). The required exports for mnt_idmap_{get,put}()
in VFS have been acked by Christian and received no objection from
Christoph.
- a churny change in CephFS logging to include cluster and client
identifiers in log and debug messages (Xiubo Li). This would help
in scenarios with dozens of CephFS mounts on the same node which are
getting increasingly common, especially in the Kubernetes world.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmVNDyMTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHziy6xCACmUikhgo+pZDO7oQS7HChdZFz5Q2Jb
5K9K7sJr7Zb2gFKLAV93cyFrz0JRljmgZuA3DmDTH1omrkrVAJfHJ6Md1UFG3W7o
LaowP3kECsykOiz+YtVU2957sfoFqds/q6KCXdp1Pc8WfNnL1vysCim6EGYtCqUm
c6vv0zkvEDQp+3kjTN01LHzHFZdHg8+STNM4BMiB0sO/NqbADnaQBEtDpYrgzwh7
YPwVIKcXutUmAKlb7vjUF9ptSICYkGV7B+loPS4BDva1I6dT42xqLQOu89tTKU0D
DiQAfE2oRgU+fl+mMooFJNSqD25Q6IkXrPs0HuiSHS4wtLGqYZAwwfHB
=F9o1
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
- support for idmapped mounts in CephFS (Christian Brauner, Alexander
Mikhalitsyn).
The series was originally developed by Christian and later picked up
and brought over the finish line by Alexander, who also contributed
an enabler on the MDS side (separate owner_{u,g}id fields on the
wire).
The required exports for mnt_idmap_{get,put}() in VFS have been acked
by Christian and received no objection from Christoph.
- a churny change in CephFS logging to include cluster and client
identifiers in log and debug messages (Xiubo Li).
This would help in scenarios with dozens of CephFS mounts on the same
node which are getting increasingly common, especially in the
Kubernetes world.
* tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client:
ceph: allow idmapped mounts
ceph: allow idmapped atomic_open inode op
ceph: allow idmapped set_acl inode op
ceph: allow idmapped setattr inode op
ceph: pass idmap to __ceph_setattr
ceph: allow idmapped permission inode op
ceph: allow idmapped getattr inode op
ceph: pass an idmapping to mknod/symlink/mkdir
ceph: add enable_unsafe_idmap module parameter
ceph: handle idmapped mounts in create_request_message()
ceph: stash idmapping in mdsc request
fs: export mnt_idmap_get/mnt_idmap_put
libceph, ceph: move mdsmap.h to fs/ceph
ceph: print cluster fsid and client global_id in all debug logs
ceph: rename _to_client() to _to_fs_client()
ceph: pass the mdsc to several helpers
libceph: add doutc and *_client debug macros support
* Support for handling misaligned accesses in S-mode.
* Probing for misaligned access support is now properly cached and
handled in parallel.
* PTDUMP now reflects the SW reserved bits, as well as the PBMT and
NAPOT extensions.
* Performance improvements for TLB flushing.
* Support for many new relocations in the module loader.
* Various bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=NhdR
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for handling misaligned accesses in S-mode
- Probing for misaligned access support is now properly cached and
handled in parallel
- PTDUMP now reflects the SW reserved bits, as well as the PBMT and
NAPOT extensions
- Performance improvements for TLB flushing
- Support for many new relocations in the module loader
- Various bug fixes and cleanups
* tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
riscv: Optimize bitops with Zbb extension
riscv: Rearrange hwcap.h and cpufeature.h
drivers: perf: Do not broadcast to other cpus when starting a counter
drivers: perf: Check find_first_bit() return value
of: property: Add fw_devlink support for msi-parent
RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs
riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings
riscv: Don't use PGD entries for the linear mapping
RISC-V: Probe misaligned access speed in parallel
RISC-V: Remove __init on unaligned_emulation_finish()
RISC-V: Show accurate per-hart isa in /proc/cpuinfo
RISC-V: Don't rely on positional structure initialization
riscv: Add tests for riscv module loading
riscv: Add remaining module relocations
riscv: Avoid unaligned access when relocating modules
riscv: split cache ops out of dma-noncoherent.c
riscv: Improve flush_tlb_kernel_range()
riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
riscv: Improve flush_tlb_range() for hugetlb pages
riscv: Improve tlb_flush()
...
- cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=g+6E
-----END PGP SIGNATURE-----
Merge tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- removed AR7 platform support
- cleanups and fixes
* tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: AR7: remove platform
watchdog: ar7_wdt: remove driver to prepare for platform removal
vlynq: remove bus driver
mtd: parsers: ar7: remove support
serial: 8250: remove AR7 support
arch: mips: remove ReiserFS from defconfig
MIPS: lantiq: Remove unnecessary include of <linux/of_irq.h>
MIPS: lantiq: Fix pcibios_plat_dev_init() "no previous prototype" warning
MIPS: KVM: Fix a build warning about variable set but not used
MIPS: Remove dead code in relocate_new_kernel
mips: dts: ralink: mt7621: rename to GnuBee GB-PC1 and GnuBee GB-PC2
mips: dts: ralink: mt7621: define each reset as an item
mips: dts: ingenic: Remove unneeded probe-type properties
MIPS: loongson32: Remove dma.h and nand.h
When clearing the root PD fails we need to properly release it again.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
mem = bo->tbo.resource may be NULL in amdgpu_vm_bo_update.
Fixes: 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We need kernel scheduling entities to deal with handle clean up
if apps are not cleaned up properly. With commit 56e449603f0ac5
("drm/sched: Convert the GPU scheduler to variable number of run-queues")
the scheduler entities have to be created after scheduler init, so
change the ordering to fix this.
v2: Leave logic in UVD and VCE code
Fixes: 56e449603f0a ("drm/sched: Convert the GPU scheduler to variable number of run-queues")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: ltuikov89@gmail.com
The kfd_resume needs to touch GC registers to enable the interrupts,
it needs to be done before GFXOFF is enabled to ensure that the GFX is
not off and GC registers can be touched. So move kfd_resume before the
amdgpu_device_ip_late_init which enables the CGPG/GFXOFF.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a user has disabled GFXOFF this may cause problems for the suspend
sequence. Ensure that it is enabled in amdgpu_acpi_is_s0ix_active().
The system won't reach the deepest state but it also won't hang.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc-fixes for v6.7-rc1:
qxl:
- qxl memory leak fix.
syncobj:
- Fix waiting for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE
vc4:
- Fix UAF in mock helpers
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[sima: Stitch together both changelogs from Maarten. Also because of
branch history this contains a few more bugfixes which are already in
v6.6, but I didn't feel like this justifies some backmerge since there
wasn't any real conflict.]
Link: https://patchwork.freedesktop.org/patch/msgid/bc8598ee-d427-4616-8ebd-64107ab9a2d8@linux.intel.com
drm/i915 fixes for v6.7-rc1:
- Fix null dereference when perf interface is not available
- Fix a -Wstringop-overflow warning
- Fix a -Wformat-truncation warning in intel_tc_port_init
- Flush WC GGTT only on required platforms
- Fix MTL HBR3 rate support on C10 phy and eDP
- Fix MTL notify_guc for multi-GT
- Bump GLK CDCLK frequency when driving multiple pipes
- Fix potential spectre vulnerability
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/878r78xrxd.fsf@intel.com
A race condition exists where a synchronous (noqueue) transfer can be
active during a system suspend. This can cause a null pointer
dereference exception to occur when the system resumes.
Example order of events leading to the exception:
1. spi_sync() calls __spi_transfer_message_noqueue() which sets
ctlr->cur_msg
2. Spi transfer begins via spi_transfer_one_message()
3. System is suspended interrupting the transfer context
4. System is resumed
6. spi_controller_resume() calls spi_start_queue() which resets cur_msg
to NULL
7. Spi transfer context resumes and spi_finalize_current_message() is
called which dereferences cur_msg (which is now NULL)
Wait for synchronous transfers to complete before suspending by
acquiring the bus mutex and setting/checking a suspend flag.
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Link: https://lore.kernel.org/r/20231107144743.v1.1.I7987f05f61901f567f7661763646cb7d7919b528@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@kernel.org
Fix to check the tracepoint event is not valid with $retval.
The commit 08c9306fc2e3 ("tracing/fprobe-event: Assume fprobe is
a return event by $retval") introduced automatic return probe
conversion with $retval. But since tracepoint event does not
support return probe, $retval is not acceptable.
Without this fix, ftracetest, tprobe_syntax_errors.tc fails;
[22] Tracepoint probe event parser error log check [FAIL]
----
# tail 22-tprobe_syntax_errors.tc-log.mRKroL
+ ftrace_errlog_check trace_fprobe t kfree ^$retval dynamic_events
+ printf %s t kfree
+ wc -c
+ pos=8
+ printf %s t kfree ^$retval
+ tr -d ^
+ command=t kfree $retval
+ echo Test command: t kfree $retval
Test command: t kfree $retval
+ echo
----
So 't kfree $retval' should fail (tracepoint doesn't support
return probe) but passed it.
Link: https://lore.kernel.org/all/169944555933.45057.12831706585287704173.stgit@devnote2/
Fixes: 08c9306fc2e3 ("tracing/fprobe-event: Assume fprobe is a return event by $retval")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Most architectures that support kprobes declare this function in their
own asm/kprobes.h header and provide an override, but some are missing
the prototype, which causes a warning for the __weak stub implementation:
kernel/kprobes.c:1865:12: error: no previous prototype for 'kprobe_exceptions_notify' [-Werror=missing-prototypes]
1865 | int __weak kprobe_exceptions_notify(struct notifier_block *self,
Move the prototype into linux/kprobes.h so it is visible to all
the definitions.
Link: https://lore.kernel.org/all/20231108125843.3806765-4-arnd@kernel.org/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Add a note about the argument and return value accecss will be best
effort. Depending on the type, it will be passed via stack or a
pair of the registers, but $argN and $retval only support the
single register access.
Link: https://lore.kernel.org/all/169556269377.146934.14829235476649685954.stgit@devnote2/
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
These enums are passed to set/test_bit(). The set/test_bit() functions
take a bit number instead of a shifted value. Passing a shifted value
is a double shift bug like doing BIT(BIT(1)). The double shift bug
doesn't cause a problem here because we are only checking 0 and 1 but
if the value was 5 or above then it can lead to a buffer overflow.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The PWMF_REQUESTED enum is supposed to be used with test_bit() and not
used as in a bitwise AND. In this specific code the flag will never be
set so the function is effectively a no-op.
Fixes: e3fe982b2e4e ("pwm: samsung: Put per-channel data into driver data")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
wr_reg_wa() is not an appropriate name for a global function, and doesn't need
to be global anyway, so mark it static and avoid the warning:
drivers/video/fbdev/fsl-diu-fb.c:493:6: error: no previous prototype for 'wr_reg_wa' [-Werror=missing-prototypes]
Fixes: 0d9dab39fbbe ("powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
When CONFIG_SYSFB is disabled, the hyperv_fb driver can now run into
undefined behavior on a gen2 VM, as indicated by this smatch warning:
drivers/video/fbdev/hyperv_fb.c:1077 hvfb_getmem() error: uninitialized symbol 'base'.
drivers/video/fbdev/hyperv_fb.c:1077 hvfb_getmem() error: uninitialized symbol 'size'.
Since there is no way to know the actual framebuffer in this configuration,
just return an allocation failure here, which should avoid the build
warning and the undefined behavior.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202311070802.YCpvehaz-lkp@intel.com/
Fixes: a07b50d80ab6 ("hyperv: avoid dependency on screen_info")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/encoder-tpd12s015: section mismatch in reference: tpd_driver+0x4 (section: .data) -> tpd_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410: section mismatch in reference: tfp410_driver+0x4 (section: .data) -> tfp410_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01: section mismatch in reference: sharp_ls_driver+0x4 (section: .data) -> sharp_ls_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410: section mismatch in reference: tfp410_driver+0x4 (section: .data) -> tfp410_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi: section mismatch in reference: hdmi_connector_driver+0x4 (section: .data) -> hdmic_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/connector-dvi: section mismatch in reference: dvi_connector_driver+0x4 (section: .data) -> dvic_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm: section mismatch in reference: dsicm_driver+0x4 (section: .data) -> dsicm_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/panel-dpi: section mismatch in reference: panel_dpi_driver+0x4 (section: .data) -> panel_dpi_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv: section mismatch in reference: tvc_connector_driver+0x4 (section: .data) -> tvc_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and also slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __refdata which
is needed to suppress a (W=1) modpost warning:
WARNING: modpost: drivers/video/fbdev/atmel_lcdfb: section mismatch in reference: atmel_lcdfb_driver+0x4 (section: .data) -> atmel_lcdfb_remove (section: .exit.text)
[folded in patch by Nathan Chancellor]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
W/RREG32_RLC is hardedcoded to use instance 0. W/RREG32_SOC15_RLC
should be used instead when inst != 0.
v2: rebase
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_kiq_wreg/rreg is hardcoded to use MEC engine 0.
Add an xcc_id parameter to amdgpu_kiq_wreg/rreg, define W/RREG32_XCC
and amdgpu_device_xcc_wreg/rreg to use the new xcc_id parameter.
Using amdgpu_sriov_runtime to determine whether to access via kiq or
RLC is sufficient for now.
v5: add condition in amdgpu_device_xcc_w/rreg, remove trace func call
v4: avoid using amdgpu_sriov_w/rreg
v3: use W/RREG32_XCC to handle non-kiq case
v2: define amdgpu_device_xcc_wreg/rreg instead of changing parameters
of amdgpu_device_wreg/rreg
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add pcs xgmi ras error query support for smu v13.0.6.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Spotted by coccicheck, there is a redundant check for
v->SourcePixelFormat[k] != dm_444_16. This patch will
remove it. The corresponding output follows.
drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c:5130:86-122: duplicated argument to && or ||
Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
avoid driver to touch invalid mca reg.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So driver doesn't touch invalid aca entries.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add pcs xgmi v6.4.0 ras support
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change local memory type to MTYPE_UC on revision id 0
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
disable mca debug mode for smu v13.0.6 by default.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Direct error query mode and firmware error query mode
are supported for now.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
refine smu mca driver to support query ras error from pmfw path.
- correct gfx smu bank hwid (from mp5 to smu bank)
- retire unused callback function in amdgpu_mca_smu_funcs{}
- add new mca_bank_set{} structure to collect mca bank
- move enum mca_reg_idx into amdgpu_mca.h header
- add mca status register field decode macro
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The following regs can only be programmed by the PF:
HDP_MISC_CNTL
HDP_NONSURFACE_BASE
HDP_NONSURFACE_BASE_HI
v2: update commit message
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Samir Dhume <samir.dhume@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PCTL0_MMHUB_DEEPSLEEP_IB is blocked for VF access
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Samir Dhume <samir.dhume@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Resolves Sphinx unexpected indentation warning when compiling
documentation (e.g. `make htmldocs`). Replaces tabs with spaces and adds
a literal block to keep vertical formatting of the
example power state list.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> (v2)
Acked-by: Randy Dunlap <rdunlap@infradead.org> (v2)
Signed-off-by: Hunter Chasens <hunter.chasens18@ncf.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
WREG32/RREG32_SOC15_IP_NO_KIQ and amdgpu_virt_kiq_reg_write_reg_wait
are not using the correct rlcg interface or mec engine, respectively.
Add xcc instance parameter to them.
v4: Use GET_INST and squash commit with:
"drm/amdgpu: Add xcc_inst param to amdgpu_virt_kiq_reg_write_reg_wait"
v3: xcc not needed for MMMHUB
v2: rebase
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "rlcg_reg_access_supported" flag is missing. Add it back in.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The DS clock may exceed the limit as sclk dfll divider is 16
to target freq.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
correct following amdgpu ip block version information:
- gfx_v9_4_3
- sdma_v4_4_2
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hide PCIe DPM attribute on SOCs with GC v9.4.2 and GC v9.4.3.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set_xgmi_plpd_mode may be unsupported and this isn't error, no need to
print warning for it.
v2: add ret2 to save the status of psp_ras_trigger_error.
Suggested-by: lijo.lazar@amd.com
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise userspace can spam the logs by using incorrect input values.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We should not leak the pointer where we couldn't grab the reference
on to the caller because it can be that the error handling still
tries to put the reference then.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The default AGP settings were overwriting the IP selected
ones since the default was getting set after the IP ones
were selected.
Fixes: de59b69932e6 ("drm/amdgpu/gmc: set a default disable value for AGP")
Link: https://lists.freedesktop.org/archives/amd-gfx/2023-November/100966.html
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
This patch leverages the alternative mechanism to dynamically optimize
bitops (including __ffs, __fls, ffs, fls) with Zbb instructions. When
Zbb ext is not supported by the runtime CPU, legacy implementation is
used. If Zbb is supported, then the optimized variants will be selected
via alternative patching.
The legacy bitops support is taken from the generic C implementation as
fallback.
If the parameter is a build-time constant, we leverage compiler builtin to
calculate the result directly, this approach is inspired by x86 bitops
implementation.
EFI stub runs before the kernel, so alternative mechanism should not be
used there, this patch introduces a macro NO_ALTERNATIVE for this purpose.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231031064553.2319688-3-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now hwcap.h and cpufeature.h are mutually including each other, and most of
the variable/API declarations in hwcap.h are implemented in cpufeature.c,
so, it's better to move them into cpufeature.h and leave only macros for
ISA extension logical IDs in hwcap.h.
BTW, the riscv_isa_extension_mask macro is not used now, so this patch
removes it.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231031064553.2319688-2-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit 6ac19f96515e ("arm64: avoid prototype warnings for syscalls")
added missing declarations to various syscall wrapper macros. It
however proved a little too zealous in __SYSCALL_DEFINEx(), as a
declaration for __arm64_sys##name was already present. A declaration
is required before the call to ALLOW_ERROR_INJECTION(), so keep
the original one and remove the new one.
Fixes: 6ac19f96515e ("arm64: avoid prototype warnings for syscalls")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231109141153.250046-1-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231107151223.3971602-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Proposed patch fixes initialization of CSC3551 on the UM5302LA laptop.
Patching DSDT table is not required since ASUS did added _DSD entry.
Nothing new introduced but reused work started by Stefan B.
Currently there is no official firmware available for 10431A83 on
cirrus git unfortunately.
For testing used 104317f3 (which is also seems on i2c bus):
$ cd /lib/firmware/cirrus/ && \
for fw in $(find ./ -name '*104317f3*'); do newfw=$(echo $fw | sed 's/104317f3/10431a83/g'); echo echo "$fw -> $newfw"; ln -s $f $newfw; done
With the patch applied to 6.6.0 and obviously symlinks to 104317F3 FW,
speakers works and to my susrprise they sound quite good and loud
without distortion.
Probably confirmation from cirrus team is needed on firmware.
Signed-off-by: Vitalii Torshyn <vitaly.torshyn@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218119
Link: https://lore.kernel.org/r/CAHiQ-bCMPpCJ8eOYAaVVoqGkFixS1qTgSS4xfbZvL4oZV9LYew@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As reported recently, ALSA core info helper may cause a deadlock at
the forced device disconnection during the procfs operation.
The proc_remove() (that is called from the snd_card_disconnect()
helper) has a synchronization of the pending procfs accesses via
wait_for_completion(). Meanwhile, ALSA procfs helper takes the global
mutex_lock(&info_mutex) at both the proc_open callback and
snd_card_info_disconnect() helper. Since the proc_open can't finish
due to the mutex lock, wait_for_completion() never returns, either,
hence it deadlocks.
TASK#1 TASK#2
proc_reg_open()
takes use_pde()
snd_info_text_entry_open()
snd_card_disconnect()
snd_info_card_disconnect()
takes mutex_lock(&info_mutex)
proc_remove()
wait_for_completion(unused_pde)
... waiting task#1 closes
mutex_lock(&info_mutex)
=> DEADLOCK
This patch is a workaround for avoiding the deadlock scenario above.
The basic strategy is to move proc_remove() call outside the mutex
lock. proc_remove() can work gracefully without extra locking, and it
can delete the tree recursively alone. So, we call proc_remove() at
snd_info_card_disconnection() at first, then delete the rest resources
recursively within the info_mutex lock.
After the change, the function snd_info_disconnect() doesn't do
disconnection by itself any longer, but it merely clears the procfs
pointer. So rename the function to snd_info_clear_entries() for
avoiding confusion.
The similar change is applied to snd_info_free_entry(), too. Since
the proc_remove() is called only conditionally with the non-NULL
entry->p, it's skipped after the snd_info_clear_entries() call.
Reported-by: Shinhyung Kang <s47.kang@samsung.com>
Closes: https://lore.kernel.org/r/664457955.21699345385931.JavaMail.epsvc@epcpadp4
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231109141954.4283-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is really just a single patch, but since the offending fix hasn't
yet made it to my for-next I'm merging it here.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
One additional driver fix that came in during the merge window.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmVMwUQACgkQJNaLcl1U
h9Aizgf/bz/+UOKjILeQ4MJz+gLEgEza5SfzyMw+zVgDjSD7a+LhwI26869s74E8
F1a0zwdnlfHt2T4Y/ouJBJ/kDPCIj6kgYdYjMTTBzu5ui/Pp7QHbDzUu+zGMo4SH
c5N8NThgh9lGLf+AFIEh7whXSO1LzNVgZDaK2X1zxHNF5MHkAi/pOFP2wL+zohuW
eGJ9EylRFzcHAjcOCJbCoJWn+KKJDIiPUN1wNRC166Ps1LPwwy7KT/AyTo2PwyPe
79apcQro1C8BoovOZyxbLahX+RdF31tcsn9jQL6gYsQx0LqoVl0rY8cZtZtn1auv
PWF517IyAlEfYUF8dD2Ht6kCZpFxZw==
=WDw2
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.7-merge-window-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: One more fix for the merge window
One additional driver fix that came in during the merge window.
These two ended up in the AIA series, but they're really independent
improvements.
* b4-shazam-merge:
of: property: Add fw_devlink support for msi-parent
RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs
Link: https://lore.kernel.org/r/20231027154254.355853-1-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This allows fw_devlink to create device links between consumers of
a MSI and the supplier of the MSI.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20231027154254.355853-3-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The riscv_of_processor_hartid() used by riscv_of_parent_hartid() fails
for HARTs disabled in the DT. This results in the following warning
thrown by the RISC-V INTC driver for the E-core on SiFive boards:
[ 0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller
The riscv_of_parent_hartid() is only expected to read the hartid
from the DT so we directly call of_get_cpu_hwid() instead of calling
riscv_of_processor_hartid().
Fixes: ad635e723e17 ("riscv: cpu: Add 64bit hartid support on RV64")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20231027154254.355853-2-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
-EOPNOTSUPP is the return value that implements a "no-op" hook, not 0.
Without this fix having only the BPF LSM enabled (with no programs
attached) can cause uninitialized variable reads in
nfsd4_encode_fattr(), because the BPF hook returns 0 without touching
the 'ctxlen' variable and the corresponding 'contextlen' variable in
nfsd4_encode_fattr() remains uninitialized, yet being treated as valid
based on the 0 return value.
Cc: stable@vger.kernel.org
Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks")
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
1 is the return value that implements a "no-op" hook, not 0.
Cc: stable@vger.kernel.org
Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
A collection of fixes that have come in during the merge window, the
majority of this is driver specific with one core fix for handling of
DAPM clock widgets when a name prefix is specified for the card - the
name should not be applied to the clock name we request from the clock
API.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmVLuWYACgkQJNaLcl1U
h9D0OQf/dauiR5PdVTxXdxxNB3qygA8MVOIqyVv0D0FzjjffuVvVhr1c0gkiIa+R
isO8esWr7iM+aM0/Z5XleAFckTWLSi9gPQ+NvRQKGCLUh/MRBVIFkJnBvLx6frRE
h6Ax9duai1RZfs+uqOMfUlQFN13y2ew4dn64vHZNu4f/Lqaskh4hrB4bn9jQhM9I
bnmaCo9DvecS1TlJrewF1Ie2cvfR1DM87IvvkfaRtP2hW7oerURYm7myWitu/fr+
Hlpj9BxTLhbJlFR13kGtm+HNXsWyLjO4NdAVUxC6aMHCQ4vfTy61ojfq4CZKYN0J
ZpRoeG+4mP/WjqqaaN7hJq/USw4BxQ==
=iZZQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.7-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.7
A collection of fixes that have come in during the merge window, the
majority of this is driver specific with one core fix for handling of
DAPM clock widgets when a name prefix is specified for the card - the
name should not be applied to the clock name we request from the clock
API.
The keyring and auth functions can be called from both the host and
the target side and are controlled by Kconfig options for each of the
combinations, but the declarations are controlled by #ifdef checks
on the shared Kconfig symbols.
This leads to link failures in combinations where one of the frontends
is built-in and the other one is a module, and the keyring code
ends up in a module that is not reachable from the builtin code:
ld: drivers/nvme/host/core.o: in function `nvme_core_exit':
core.c:(.exit.text+0x4): undefined reference to `nvme_keyring_exit'
ld: drivers/nvme/host/core.o: in function `nvme_core_init':
core.c:(.init.text+0x94): undefined reference to `nvme_keyring_init
ld: drivers/nvme/host/tcp.o: in function `nvme_tcp_setup_ctrl':
tcp.c:(.text+0x4c18): undefined reference to `nvme_tls_psk_default'
Address this by moving nvme_keyring_init()/nvme_keyring_exit() into
module init/exit functions for the keyring module.
Fixes: be8e82caa6859 ("nvme-tcp: enable TLS handshake upcall")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This reverts commit a07a594152173a3dd3bdd12fc7d73dbba54cdbca.
This is no longer needed after the patch ("arm64: Move MediaTek GIC
quirk handling from irqchip to core).
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231107072651.v2.2.I2c5fa192e767eb3ee233bc28eb60e2f8656c29a6@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In commit 44bd78dd2b88 ("irqchip/gic-v3: Disable pseudo NMIs on
MediaTek devices w/ firmware issues") we added a method for detecting
MediaTek devices with broken firmware and disabled pseudo-NMI. While
that worked, it didn't address the problem at a deep enough level.
The fundamental issue with this broken firmware is that it's not
saving and restoring several important GICR registers. The current
list is believed to be:
* GICR_NUM_IPRIORITYR
* GICR_CTLR
* GICR_ISPENDR0
* GICR_ISACTIVER0
* GICR_NSACR
Pseudo-NMI didn't work because it was the only thing (currently) in
the kernel that relied on the broken registers, so forcing pseudo-NMI
off was an effective fix. However, it could be observed that calling
system_uses_irq_prio_masking() on these systems still returned
"true". That caused confusion and led to the need for
commit a07a59415217 ("arm64: smp: avoid NMI IPIs with broken MediaTek
FW"). It's worried that the incorrect value returned by
system_uses_irq_prio_masking() on these systems will continue to
confuse future developers.
Let's fix the issue a little more completely by disabling IRQ
priorities at a deeper level in the kernel. Once we do this we can
revert some of the other bits of code dealing with this quirk.
This includes a partial revert of commit 44bd78dd2b88
("irqchip/gic-v3: Disable pseudo NMIs on MediaTek devices w/ firmware
issues"). This isn't a full revert because it leaves some of the
changes to the "quirks" structure around in case future code needs it.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231107072651.v2.1.Ide945748593cffd8ff0feb9ae22b795935b944d6@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Limit the free list length to the size of the IO TLB. Transient pool can be
smaller than IO_TLB_SEGSIZE, but the free list is initialized with the
assumption that the total number of slots is a multiple of IO_TLB_SEGSIZE.
As a result, swiotlb_area_find_slots() may allocate slots past the end of
a transient IO TLB buffer.
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Closes: https://lore.kernel.org/linux-iommu/104a8c8fedffd1ff8a2890983e2ec1c26bff6810.camel@linux.ibm.com/
Fixes: 79636caad361 ("swiotlb: if swiotlb is full, fall back to a transient memory pool")
Cc: stable@vger.kernel.org
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Alexandre Ghiti <alexghiti@rivosinc.com> says:
Those 2 patches fix the set_memory_XX() and set_direct_map_XX() APIs, which
in turn fix STRICT_KERNEL_RWX and memfd_secret(). Those were broken since the
permission changes were not applied to the linear mapping because the linear
mapping is mapped using hugepages and walk_page_range_novma() does not split
such mappings.
To fix that, patch 1 disables PGD mappings in the linear mapping as it is
hard to propagate changes at this level in *all* the page tables, this has the
downside of disabling PMD mapping for sv32 and PUD (1GB) mapping for sv39 in
the linear mapping (for specific kernels, we could add a Kconfig to enable
ARCH_HAS_SET_DIRECT_MAP and STRICT_KERNEL_RWX if needed, I'm pretty sure we'll
discuss that).
patch 2 implements the split of the huge linear mappings so that
walk_page_range_novma() can properly apply the permissions. The whole split is
protected with mmap_sem in write mode, but I'm wondering if that's enough,
any opinion on that is appreciated.
* b4-shazam-merge:
riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings
riscv: Don't use PGD entries for the linear mapping
Link: https://lore.kernel.org/r/20231108075930.7157-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When STRICT_KERNEL_RWX is set, any change of permissions on any kernel
mapping (vmalloc/modules/kernel text...etc) should be applied on its
linear mapping alias. The problem is that the riscv kernel uses huge
mappings for the linear mapping and walk_page_range_novma() does not
split those huge mappings.
So this patchset implements such split in order to apply fine-grained
permissions on the linear mapping.
Below is the difference before and after (the first PUD mapping is split
into PTE/PMD mappings):
Before:
---[ Linear mapping ]---
0xffffaf8000080000-0xffffaf8000200000 0x0000000080080000 1536K PTE D A G . . W R V
0xffffaf8000200000-0xffffaf8077c00000 0x0000000080200000 1914M PMD D A G . . W R V
0xffffaf8077c00000-0xffffaf8078800000 0x00000000f7c00000 12M PMD D A G . . . R V
0xffffaf8078800000-0xffffaf8078c00000 0x00000000f8800000 4M PMD D A G . . W R V
0xffffaf8078c00000-0xffffaf8079200000 0x00000000f8c00000 6M PMD D A G . . . R V
0xffffaf8079200000-0xffffaf807e600000 0x00000000f9200000 84M PMD D A G . . W R V
0xffffaf807e600000-0xffffaf807e716000 0x00000000fe600000 1112K PTE D A G . . W R V
0xffffaf807e717000-0xffffaf807e71a000 0x00000000fe717000 12K PTE D A G . . W R V
0xffffaf807e71d000-0xffffaf807e71e000 0x00000000fe71d000 4K PTE D A G . . W R V
0xffffaf807e722000-0xffffaf807e800000 0x00000000fe722000 888K PTE D A G . . W R V
0xffffaf807e800000-0xffffaf807fe00000 0x00000000fe800000 22M PMD D A G . . W R V
0xffffaf807fe00000-0xffffaf807ff54000 0x00000000ffe00000 1360K PTE D A G . . W R V
0xffffaf807ff55000-0xffffaf8080000000 0x00000000fff55000 684K PTE D A G . . W R V
0xffffaf8080000000-0xffffaf8400000000 0x0000000100000000 14G PUD D A G . . W R V
After:
---[ Linear mapping ]---
0xffffaf8000080000-0xffffaf8000200000 0x0000000080080000 1536K PTE D A G . . W R V
0xffffaf8000200000-0xffffaf8077c00000 0x0000000080200000 1914M PMD D A G . . W R V
0xffffaf8077c00000-0xffffaf8078800000 0x00000000f7c00000 12M PMD D A G . . . R V
0xffffaf8078800000-0xffffaf8078a00000 0x00000000f8800000 2M PMD D A G . . W R V
0xffffaf8078a00000-0xffffaf8078c00000 0x00000000f8a00000 2M PTE D A G . . W R V
0xffffaf8078c00000-0xffffaf8079200000 0x00000000f8c00000 6M PMD D A G . . . R V
0xffffaf8079200000-0xffffaf807e600000 0x00000000f9200000 84M PMD D A G . . W R V
0xffffaf807e600000-0xffffaf807e716000 0x00000000fe600000 1112K PTE D A G . . W R V
0xffffaf807e717000-0xffffaf807e71a000 0x00000000fe717000 12K PTE D A G . . W R V
0xffffaf807e71d000-0xffffaf807e71e000 0x00000000fe71d000 4K PTE D A G . . W R V
0xffffaf807e722000-0xffffaf807e800000 0x00000000fe722000 888K PTE D A G . . W R V
0xffffaf807e800000-0xffffaf807fe00000 0x00000000fe800000 22M PMD D A G . . W R V
0xffffaf807fe00000-0xffffaf807ff54000 0x00000000ffe00000 1360K PTE D A G . . W R V
0xffffaf807ff55000-0xffffaf8080000000 0x00000000fff55000 684K PTE D A G . . W R V
0xffffaf8080000000-0xffffaf8080800000 0x0000000100000000 8M PMD D A G . . W R V
0xffffaf8080800000-0xffffaf8080af6000 0x0000000100800000 3032K PTE D A G . . W R V
0xffffaf8080af6000-0xffffaf8080af8000 0x0000000100af6000 8K PTE D A G . X . R V
0xffffaf8080af8000-0xffffaf8080c00000 0x0000000100af8000 1056K PTE D A G . . W R V
0xffffaf8080c00000-0xffffaf8081a00000 0x0000000100c00000 14M PMD D A G . . W R V
0xffffaf8081a00000-0xffffaf8081a40000 0x0000000101a00000 256K PTE D A G . . W R V
0xffffaf8081a40000-0xffffaf8081a44000 0x0000000101a40000 16K PTE D A G . X . R V
0xffffaf8081a44000-0xffffaf8081a52000 0x0000000101a44000 56K PTE D A G . . W R V
0xffffaf8081a52000-0xffffaf8081a54000 0x0000000101a52000 8K PTE D A G . X . R V
...
0xffffaf809e800000-0xffffaf80c0000000 0x000000011e800000 536M PMD D A G . . W R V
0xffffaf80c0000000-0xffffaf8400000000 0x0000000140000000 13G PUD D A G . . W R V
Note that this also fixes memfd_secret() syscall which uses
set_direct_map_invalid_noflush() and set_direct_map_default_noflush() to
remove the pages from the linear mapping. Below is the kernel page table
while a memfd_secret() syscall is running, you can see all the !valid
page table entries in the linear mapping:
...
0xffffaf8082240000-0xffffaf8082241000 0x0000000102240000 4K PTE D A G . . W R .
0xffffaf8082241000-0xffffaf8082250000 0x0000000102241000 60K PTE D A G . . W R V
0xffffaf8082250000-0xffffaf8082252000 0x0000000102250000 8K PTE D A G . . W R .
0xffffaf8082252000-0xffffaf8082256000 0x0000000102252000 16K PTE D A G . . W R V
0xffffaf8082256000-0xffffaf8082257000 0x0000000102256000 4K PTE D A G . . W R .
0xffffaf8082257000-0xffffaf8082258000 0x0000000102257000 4K PTE D A G . . W R V
0xffffaf8082258000-0xffffaf8082259000 0x0000000102258000 4K PTE D A G . . W R .
0xffffaf8082259000-0xffffaf808225a000 0x0000000102259000 4K PTE D A G . . W R V
0xffffaf808225a000-0xffffaf808225c000 0x000000010225a000 8K PTE D A G . . W R .
0xffffaf808225c000-0xffffaf8082266000 0x000000010225c000 40K PTE D A G . . W R V
0xffffaf8082266000-0xffffaf8082268000 0x0000000102266000 8K PTE D A G . . W R .
0xffffaf8082268000-0xffffaf8082284000 0x0000000102268000 112K PTE D A G . . W R V
0xffffaf8082284000-0xffffaf8082288000 0x0000000102284000 16K PTE D A G . . W R .
0xffffaf8082288000-0xffffaf808229c000 0x0000000102288000 80K PTE D A G . . W R V
0xffffaf808229c000-0xffffaf80822a0000 0x000000010229c000 16K PTE D A G . . W R .
0xffffaf80822a0000-0xffffaf80822a5000 0x00000001022a0000 20K PTE D A G . . W R V
0xffffaf80822a5000-0xffffaf80822a6000 0x00000001022a5000 4K PTE D A G . . . R V
0xffffaf80822a6000-0xffffaf80822ab000 0x00000001022a6000 20K PTE D A G . . W R V
...
And when the memfd_secret() fd is released, the linear mapping is
correctly reset:
...
0xffffaf8082240000-0xffffaf80822a5000 0x0000000102240000 404K PTE D A G . . W R V
0xffffaf80822a5000-0xffffaf80822a6000 0x00000001022a5000 4K PTE D A G . . . R V
0xffffaf80822a6000-0xffffaf80822af000 0x00000001022a6000 36K PTE D A G . . W R V
...
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231108075930.7157-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Propagating changes at this level is cumbersome as we need to go through
all the page tables when that happens (either when changing the
permissions or when splitting the mapping).
Note that this prevents the use of 4MB mapping for sv32 and 1GB mapping for
sv39 in the linear mapping.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231108075930.7157-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reading the peak data to detect abnormal data in the ADC channel.
If abnormal data occurs, the driver takes recovery actions to
refresh the ADC channel.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20231108061658.1265065-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dell new platform support dual speaker. But BIOS verb table only show one speaker.
It will fill verb table for second speaker. Then bind with CS AMP model.
Fixes: de90f5165b1c ("ALSA: hda/realtek: Add support for DELL Oasis 13/14/16 laptops")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/4dd390a77bf742b8a518ac2deee00b0f@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If set_smb1_rsp_status() is not implemented, It will cause NULL pointer
dereferece error when client send malformed smb1 message.
This patch add set_smb1_rsp_status() to ignore malformed smb1 message.
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix argument list that the kdoc format and script verified in
ksmbd_vfs_kern_path_locked().
fs/smb/server/vfs.c:1207: warning: Function parameter or member 'parent_path'
not described in 'ksmbd_vfs_kern_path_locked'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
slab out-of-bounds write is caused by that offsets is bigger than pntsd
allocation size. This patch add the check to validate 3 offsets using
allocation size.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-22271
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and so slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __ref which is
needed to suppress a (W=1) modpost warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and so slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __ref which is
needed to suppress a (W=1) modpost warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
This reverts commit 5b6fba546da246b3d0dd8465c07783e22629cc53.
Commit 5b6fba546da2 ("ata: libata-core: Detach a port devices on
shutdown") modified the function ata_pci_shutdown_one() to stop
(suspend) devices attached to the ports of a PCI AHCI adapter to ensure
that drives are spun down before shutting down a system. However, this
is done only for PCI adapters and not for other types of adapters. This
limitation was addressed with commit 24eca2dce0f8 ("scsi: sd: Introduce
manage_shutdown device flag"). With this, all ATA disks are spun down on
system shutdown, which make the changes introduced with 5b6fba546da2
useless.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Probing for misaligned access speed takes about 0.06 seconds. On a
system with 64 cores, doing this in smp_callin() means it's done
serially, extending boot time by 3.8 seconds. That's a lot of boot time.
Instead of measuring each CPU serially, let's do the measurements on
all CPUs in parallel. If we disable preemption on all CPUs, the
jiffies stop ticking, so we can do this in stages of 1) everybody
except core 0, then 2) core 0. The allocations are all done outside of
on_each_cpu() to avoid calling alloc_pages() with interrupts disabled.
For hotplugged CPUs that come in after the boot time measurement,
register CPU hotplug callbacks, and do the measurement there. Interrupts
are enabled in those callbacks, so they're fine to do alloc_pages() in.
Reported-by: Jisheng Zhang <jszhang@kernel.org>
Closes: https://lore.kernel.org/all/mhng-9359993d-6872-4134-83ce-c97debe1cf9a@palmer-ri-x1c9/T/#mae9b8f40016f9df428829d33360144dc5026bcbf
Fixes: 584ea6564bca ("RISC-V: Probe for unaligned access speed")
Signed-off-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20231106225855.3121724-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This function shouldn't be __init, since it's called during hotplug. The
warning says it well enough:
WARNING: modpost: vmlinux: section mismatch in reference:
check_unaligned_access_all_cpus+0x13a (section: .text) ->
unaligned_emulation_finish (section: .init.text)
Signed-off-by: Evan Green <evan@rivosinc.com>
Fixes: 71c54b3d169d ("riscv: report misaligned accesses emulation to hwprobe")
Link: https://lore.kernel.org/r/20231106231105.3141413-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In /proc/cpuinfo, most of the information we show for each processor is
specific to that hart: marchid, mvendorid, mimpid, processor, hart,
compatible, and the mmu size. But the ISA string gets filtered through a
lowest common denominator mask, so that if one CPU is missing an ISA
extension, no CPUs will show it.
Now that we track the ISA extensions for each hart, let's report ISA
extension info accurately per-hart in /proc/cpuinfo. We cannot change
the "isa:" line, as usermode may be relying on that line to show only
the common set of extensions supported across all harts. Add a new "hart
isa" line instead, which reports the true set of extensions for that
hart.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231106232439.3176268-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Without this I get a bunch of warnings along the lines of
arch/riscv/kernel/module.c:535:26: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init]
535 | [R_RISCV_32] = { apply_r_riscv_32_rela },
This just mades the member initializers explicit instead of positional.
I also aligned some of the table, but mostly just to make the batch
editing go faster.
Fixes: b51fc88cb35e ("Merge patch series "riscv: Add remaining module relocations and tests"")
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231107155529.8368-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Charlie Jenkins <charlie@rivosinc.com> says:
A handful of module relocations were missing, this patch includes the
remaining ones. I also wrote some test cases to ensure that module
loading works properly. Some relocations cannot be supported in the
kernel, these include the ones that rely on thread local storage and
dynamic linking.
This patch also overhauls the implementation of ADD/SUB/SET/ULEB128
relocations to handle overflow. "Overflow" is different for ULEB128
since it is a variable-length encoding that the compiler can be expected
to generate enough space for. Instead of overflowing, ULEB128 will
expand into the next 8-bit segment of the location.
A psABI proposal [1] was merged that mandates that SET_ULEB128 and
SUB_ULEB128 are paired, however the discussion following the merging of
the pull request revealed that while the pull request was valid, it
would be better for linkers to properly handle this overflow. This patch
proactively implements this methodology for future compatibility.
This can be tested by enabling KUNIT, RUNTIME_KERNEL_TESTING_MENU, and
RISCV_MODULE_LINKING_KUNIT.
[1] https://github.com/riscv-non-isa/riscv-elf-psabi-doc/pull/403
* b4-shazam-merge:
riscv: Add tests for riscv module loading
riscv: Add remaining module relocations
riscv: Avoid unaligned access when relocating modules
Link: https://lore.kernel.org/r/20231101-module_relocations-v9-0-8dfa3483c400@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add all final module relocations and add error logs explaining the ones
that are not supported. Implement overflow checks for
ADD/SUB/SET/ULEB128 relocations.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231101-module_relocations-v9-2-8dfa3483c400@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
With the C-extension regular 32bit instructions are not
necessarily aligned on 4-byte boundaries. RISC-V instructions
are in fact an ordered list of 16bit little-endian
"parcels", so access the instruction as such.
This should also make the code work in case someone builds
a big-endian RISC-V machine.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231101-module_relocations-v9-1-8dfa3483c400@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When only the keyring module is included but auth is not, modpost
complains about the lack of a module license tag:
ERROR: modpost: missing MODULE_LICENSE() in drivers/nvme/common/nvme-common.o
Address this by making both modules buildable standalone,
removing the now unnecessary CONFIG_NVME_COMMON symbol
in the process.
Also, now that NVME_KEYRING config symbol can be either a module or
built-in, the stubs need to check for '#if IS_ENABLED' rather than a
simple '#ifdef'.
Fixes: 9d77eb5277849 ("nvme-keyring: register '.nvme' keyring")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The cache ops are also used by the pmem code which is unconditionally
built into the kernel. Move them into a separate file that is built
based on the correct config option.
Fixes: fd962781270e ("riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> #
Link: https://lore.kernel.org/r/20231028155101.1039049-1-hch@lst.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reset/query RAS error status and count.
v2: use XGMI IP version instead of WAFL version.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The UE registe list is larger than CE list.
Reported-by: yipeng.chai@amd.com
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For IMU enabled APUs, after sending the PrepareMp1ForUnload message
to SMU in system_features_control, the RLC registers can't be touched.
The driver to stop the rlc in suspending is no longer required.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The member variable enable_hpo_pg_support is already initialized
and hence the reinitialization instruction can be removed. Issue
identified using the doubleinit.cocci Coccinelle semantic patch script.
Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change return code to EOPNOTSUPP for unsupported functions. Use the
error code information to hide sysfs nodes not valid for the SOC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Doorbell rptr/wptr can be set through multiple ways including direct
register initialization. Disable doorbell during hw_fini once the ring
is disabled so that during next module reload direct initialization
takes effect. Also, move the direct initialization after minor update is
set to 1 since rptr/wptr are reinitialized back to 0 which could be
lower than the previous doorbell value (ex: cases like module reload).
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Tested-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the default reset method to mode2 for SMU IP v14.0.0
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A recent refactor of DC's DP test pattern automation code requires the
DC stream's test pattern and test pattern color space fields to be
correctly populated before calling dc_link_dp_set_test_pattern.
[How]
Populate stream's test pattern type and color space fields before
calling into DC to program DP test pattern.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DML2 does not handle the case when we have
a single stream sourcing 2 or more planes
that are duplicates of one another. To properly
handle this scenario, pipe index to plane index
mapping is used to decide which plane is being
processed and programmed.
[how]
Create static array of pipe index to plane index map.
Populate the array properly and use in appropriate places.
Reviewed-by: Xi (Alex) Liu <xi.liu@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Similar to FPO, SubVP should also force cursor P-State
allow instead of relying on natural assertion
- Implement code path to force and unforce cursor P-State
allow for SubVP
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enable the last of the RCO options for dcn35
[How]
Breakout RCO from dccg35_set_physymclk so that
physymclk RCO can be set in dccg_init without
disabling physymclk
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean-up the code to remove references of all unused
dml architecture versions since only dml2 is actively
used.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is a case when we are switching from ODM combine to Subvp where
minimal transition based off subvp state is required. In thise case, we
need to save and restore mall state when applying minimal transition.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For all the components that participate in DCN architecture, there is a
header in the dc/inch/hw. For some reason, OPTC broke this pattern and
added all the primary functions/structs associated with that in the
dcn10_optc.h file. For consistency's sake, this commit introduces a new
optc.h file and extracts the code from dcn10_optc to this new file.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Doing a mode timing change causes a hang when OTG is not disabled.
[how]
Add link_enc null check in disable_otg_wa to cover this case.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current Desync IRQ handler will have some potential do not hit the
desync error case. We change to check both desync error HPD and DPCD.
Signed-off-by: Dennis Chan <dennis.chan@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Increase number of bits for IPS boot option
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
Update test link rate DPCD bit field to match spec
Enable RCO options for dcn35
Add missing dml2 init value for dcn35
Enable DCN clock gating
DCN35 Disable cm power optimization
Allow 16 max_slices for DP2 DSC
Fix OTG disable workaround logic
Enable more IPS options
Fix FRL assertion on boot
Fix missing blendTF programming
Update DP HPO MSA with colorimetry from test request
Fix handling duplicate planes on one stream
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For lighting up, some dml2 params needs to be initialized.
One of them escaped initial patch under:
"drm/amd/display: Add DCN35 DML2 support"
[How]
Add missing initialization.
Fixes: 115009d11ccf ("drm/amd/display: Add DCN35 DML2 support")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DENTIST was hanging when performing DISPCLK update with OTG enabled, as
OTG disable workaround was not executing.
[How]
Workaround was checking against current_state before running, but when
called from optimize_bandwidth (safe_to_lower), we should be checking
against context instead.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For Replay, if we receive HPD, it doesn’t need to reboot the display.
We don’t need to return anything exactly.
[How]
Return nothing just because we don’t need to reboot the display.
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
It's useful to disable the recovery mechanism when debugging replay
desync errors.
Signed-off-by: Dennis Chan <Dennis.Chan@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Enabling SCE after boot up will cause color distortion.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Yihan Zhu <yihan.zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some DP link layer tests request a different colorimetry than the
default one that is used. Currently, our test automation logic does not
update the MSA with the test request value for DP HPO case.
[How]
Update HPO MSA colorimetry with test automation request value.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
An SCR was made to the DP2.0 spec that updated the bit field definition
for UHBR13.5 in the test link rate DPCD register.
[How]
Add new translation to match the SCR update. Keep old translation for
backwards compatibility.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
To help isolate static screen and
video playback tests, we want to enable
an IPS option to allow IPS only on D3 cycle.
[how]
Add DISABLE_DYNAMIC and DISABLE_ALL
IPS disable flags for user control.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enable root clock optimization options for dcn35
for power savings
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Make sure to ungate the clocks on boot
so programming sequence is done successfully.
[how]
Move the ungate logic after bios init.
Reviewed-by: Xi (Alex) Liu <xi.liu@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When MPO surface pixel format is not ARGB8888, fast update can miss
programming blendTF.
[How]
Set the gamma_change update flag on blend_tf change.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
On boot disable domain22 force power on
decouple dmcub execution to reduce lock granularity
Enable fast update on blendTF change
Fix blend LUT programming
Program plane color setting correctly
amend HPD handler for Replay
Avoid NULL dereference of timing generator
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On some systems dmub commands run at high IRQ, so long running
commands will block other interrupts.
[How]
Decouple wait_for_idle from dmcub queue/execute/wait.
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: JinZe.Xu <jinze.xu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Minor formatting changes
- Update defines to match the bit width of the field it is used for
- Add new boot up bits to control HW sub block regions power
down
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HDCP2 enablement fails when domain22 is set to force
power on
[How]
Disable force power on for domain22 on startup
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The purpose of this patch is to disable XNACK or set XNACK OFF mode
on SRIOV platform which doesn't support it.
This will prevent user-space application to fail or result into
unexpected behaviour whenever the application need to run test-case
in XNACK ON mode.
Signed-off-by: Surbhi Kakarya <surbhi.kakarya@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If one of the underlying disks of raid or dm is set to read-only, then
each io will generate new log, which will cause message storm. This
environment is indeed problematic, however we can't make sure our
naive custormer won't do this, hence use pr_warn_ratelimited() to
prevent message storm in this case.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Fixes: 57e95e4670d1 ("block: fix and cleanup bio_check_ro")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20231107111247.2157820-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 4af5f2e03013 ("nbd: use blk_mq_alloc_disk and
blk_cleanup_disk") cleans up disk by blk_cleanup_disk() and it won't set
disk->private_data as NULL as before. UAF may be triggered in nbd_open()
if someone tries to open nbd device right after nbd_put() since nbd has
been free in nbd_dev_remove().
Fix this by implementing ->free_disk and free private data in it.
Fixes: 4af5f2e03013 ("nbd: use blk_mq_alloc_disk and blk_cleanup_disk")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231107103435.2074904-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Recent AMD platforms expose an HD-audio bus but without any actual
codecs, which is internally tied with a USB-audio device, supposedly.
It results in "no codecs" error of HD-audio bus driver, and it's
nothing but a waste of resources.
snd_hda_intel 0000:59:00.6: no codecs found!
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Link: https://lore.kernel.org/r/20231105152834.5620-1-akoskovich@pm.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
I've re-written the error handling but the bug is that if init_imstt()
fails we need to call iounmap(par->cmap_regs).
Fixes: c75f5a550610 ("fbdev: imsttfb: Fix use after free bug in imsttfb_probe")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The init_imstt() function calls framebuffer_release() on error and then
the probe() function calls it again. It should only be done in probe.
Fixes: 518ecb6a209f ("fbdev: imsttfb: Fix error path of imsttfb_probe()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
viafbdev.c utilizes memdup_user() to copy an array from userspace.
There is a new wrapper, specifically designed for copying arrays. Use
this one instead.
Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
OMAP2_VRFB is a bool, so the vrfb driver can never be compiled as a
module. With that __exit_p(vrfb_remove) always evaluates to NULL and
vrfb_remove() is unused.
If the driver was compilable as a module, it would fail to build because
the type of vrfb_remove() isn't compatible with struct
platform_driver::remove(). (The former returns void, the latter int.)
Fixes: aa1e49a3752f ("OMAPDSS: VRFB: add omap_vrfb_supported()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Turn a strcpy()+strncat()+'\0' into an equivalent snprintf().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
Our library has memparse() for parsing numbers with respective suffixes
suitable for memory sizes. Use it instead of custom implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
There is no point in shadowing the error codes from platform_get_irq().
Refactor omapfb_do_probe() accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Due to a flaw in the hardware design, the GL9750 replay timer frequently
times out when ASPM is enabled. As a result, the warning messages will
often appear in the system log when the system accesses the GL9750
PCI config. Therefore, the replay timer timeout must be masked.
Fixes: d7133797e9e1 ("mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2")
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kai-Heng Feng <kai.heng.geng@canonical.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231107095741.8832-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Due to a flaw in the hardware design, the GL9755 replay timer frequently
times out when ASPM is enabled. As a result, the warning messages will
often appear in the system log when the system accesses the GL9755
PCI config. Therefore, the replay timer timeout must be masked.
Fixes: 36ed2fd32b2c ("mmc: sdhci-pci-gli: A workaround to allow GL9755 to enter ASPM L1.2")
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kai-Heng Feng <kai.heng.geng@canonical.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231107095741.8832-3-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Fix typo s/depndent/dependent
Fixes: 6e9548cdb30e ("ASoC: SOF: Convert the generic IPC flood test into SOF client")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231031112218.79136-1-eugen.hristev@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver used to truncate several 64-bit registers such as PMCEID[n]
registers used to describe whether architectural and microarchitectural
events in range 0x4000-0x401f exist. Due to discarding the bits, the
driver made the events invisible, even if they existed.
Moreover, PMCCFILTR and PMCR registers have additional bits in the upper
32 bits. This patch makes them available although they aren't currently
used. Finally, functions handling PMXEVCNTR and PMXEVTYPER registers are
removed as they not being used at all.
Fixes: df29ddf4f04b ("arm64: perf: Abstract system register accesses away")
Reported-by: Carl Worth <carl@os.amperecomputing.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/..
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20231102183012.1251410-1-ilkka@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Coresight PMU driver didn't reject events meant for other PMUs.
This caused some of the Core PMU events disappearing from
the output of "perf list". In addition, trying to run e.g.
$ perf stat -e r2 sleep 1
made Coresight PMU driver to handle the event instead of letting
Core PMU driver to deal with it.
Cc: stable@vger.kernel.org
Fixes: e37dfd65731d ("perf: arm_cspmu: Add support for ARM CoreSight PMU driver")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Besar Wicaksono <bwicaksono@nvidia.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20231103001654.35565-1-ilkka@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Alexandre Ghiti <alexghiti@rivosinc.com> says:
This series optimizes the tlb flushes on riscv which used to simply
flush the whole tlb whatever the size of the range to flush or the size
of the stride.
Patch 3 introduces a threshold that is microarchitecture specific and
will very likely be modified by vendors, not sure though which mechanism
we'll use to do that (dt? alternatives? vendor initialization code?).
* b4-shazam-merge:
riscv: Improve flush_tlb_kernel_range()
riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
riscv: Improve flush_tlb_range() for hugetlb pages
riscv: Improve tlb_flush()
Link: https://lore.kernel.org/r/20231030133027.19542-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This function used to simply flush the whole tlb of all harts, be more
subtile and try to only flush the range.
The problem is that we can only use PAGE_SIZE as stride since we don't know
the size of the underlying mapping and then this function will be improved
only if the size of the region to flush is < threshold * PAGE_SIZE.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, when the range to flush covers more than one page (a 4K page or
a hugepage), __flush_tlb_range() flushes the whole tlb. Flushing the whole
tlb comes with a greater cost than flushing a single entry so we should
flush single entries up to a certain threshold so that:
threshold * cost of flushing a single entry < cost of flushing the whole
tlb.
Co-developed-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
flush_tlb_range() uses a fixed stride of PAGE_SIZE and in its current form,
when a hugetlb mapping needs to be flushed, flush_tlb_range() flushes the
whole tlb: so set a stride of the size of the hugetlb mapping in order to
only flush the hugetlb mapping. However, if the hugepage is a NAPOT region,
all PTEs that constitute this mapping must be invalidated, so the stride
size must actually be the size of the PTE.
Note that THPs are directly handled by flush_pmd_tlb_range().
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Link: https://lore.kernel.org/r/20231030133027.19542-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
For now, tlb_flush() simply calls flush_tlb_mm() which results in a
flush of the whole TLB. So let's use mmu_gather fields to provide a more
fine-grained flush of the TLB.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Link: https://lore.kernel.org/r/20231030133027.19542-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This adds a separate segment for kernel text in /proc/kcore, which has a
different address than the direct linear map.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Link: https://lore.kernel.org/r/mvmh6m758ao.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When doing a multishot read, the code path reuses the old read
paths. However this breaks an assumption built into those paths,
namely that struct io_rw::len is available for reuse by __io_import_iovec.
For multishot this results in len being set for the first receive
call, and then subsequent calls are clamped to that buffer length
incorrectly.
Instead keep len as zero after recycling buffers, to reuse the full
buffer size of the next selected buffer.
Fixes: fc68fcda0491 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Dylan Yudaken <dyudaken@gmail.com>
Link: https://lore.kernel.org/r/20231106203909.197089-4-dyudaken@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For addr: this field is not used, since buffer select is forced.
But by forcing it to be zero it leaves open future uses of the field.
len is actually usable, you could imagine that you want to receive
multishot up to a certain length.
However right now this is not how it is implemented, and it seems
safer to force this to be zero.
Fixes: fc68fcda0491 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Dylan Yudaken <dyudaken@gmail.com>
Link: https://lore.kernel.org/r/20231106203909.197089-3-dyudaken@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It can be useful to know if io_kbuf_recycle did actually recycle the
buffer on the request, or if it left the request alone.
Signed-off-by: Dylan Yudaken <dyudaken@gmail.com>
Link: https://lore.kernel.org/r/20231106203909.197089-2-dyudaken@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some data were incorrectly annotated with SYM_FUNC_*() instead of
SYM_DATA_*() ones. Use the correct ones.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231024132655.730417-4-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ENTRY()/END()/WEAK() macros are deprecated and we should make use of the
new SYM_*() macros [1] for better annotation of symbols. Replace the
deprecated ones with the new ones and fix wrong usage of END()/ENDPROC()
to correctly describe the symbols.
[1] https://docs.kernel.org/core-api/asm-annotations.html
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231024132655.730417-3-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
For the sake of coherency, use local labels in assembly when
applicable. This also avoid kprobes being confused when applying a
kprobe since the size of function is computed by checking where the
next visible symbol is located. This might end up in computing some
function size to be way shorter than expected and thus failing to apply
kprobes to the specified offset.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231024132655.730417-2-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When flashing loader.bin for K210 using kflash:
[ERROR] This is an ELF file and cannot be programmed to flash directly: arch/riscv/boot/loader.bin
Before, loader.bin relied on "OBJCOPYFLAGS := -O binary" in the main
RISC-V Makefile to create a boot image with the right format. With this
removed, the image is now created in the wrong (ELF) format.
Fix this by adding an explicit rule.
Fixes: 505b02957e74f0c5 ("riscv: Remove duplicate objcopy flag")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/1086025809583809538dfecaa899892218f44e7e.1698159066.git.geert+renesas@glider.be
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Setting up I/O queues might take quite some time on larger and/or
busy setups, so KATO might expire before all I/O queues could be
set up.
Fix this by start keep alive from the ->init_ctrl_finish() callback,
and stopping it when calling nvme_cancel_admin_tagset().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Mark O'Donovan <shiftee@posteo.net>
[fixed nvme-fc compile error]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Once ->init_ctrl_finish() is called there may be commands outstanding,
so we should quiesce the admin queue and cancel all commands prior
to call nvme_loop_destroy_admin_queue().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Mark O'Donovan <shiftee@posteo.net>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_tcp_setup_ctrl() has an open-coded version of
nvme_tcp_teardown_admin_queue().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Mark O'Donovan <shiftee@posteo.net>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently a seqnum of zero is sent during uni-directional
authentication. The zero value is reserved for the secure channel
feature which is not yet implemented.
Relevant extract from the spec:
The value 0h is used to indicate that bidirectional authentication
is not performed, but a challenge value C2 is carried in order to
generate a pre-shared key (PSK) for subsequent establishment of a
secure channel
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Introduces an explicit variable for bi-directional auth.
The currently used variable chap->s2 is incorrectly zeroed for
uni-directional auth. That will be fixed in the next patch so this
needs to change to avoid sending unexpected success2 messages
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
In cases where RVALID is false, the response is still transmitted,
but is cleared to zero.
Relevant extract from the spec:
Response R2, if valid (i.e., if the RVALID field is set to 01h),
cleared to 0h otherwise
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Driver may return an error before submitting the command to the device.
Ensure that such error is propagated up.
Fixes: 456cba386e94 ("nvme: wire-up uring-cmd support for io-passthru on char-device.")
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The firmware version sysfs entry needs to be updated after a successfully
firmware activation.
nvme-cli stopped issuing an Identify Controller command to list the
current firmware information and relies on sysfs showing the current
firmware version.
Reported-by: Kenji Tomonaga <tkenbo@gmail.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Kenji Tomonaga <tkenbo@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
[fixed off-by one afi index]
Signed-off-by: Keith Busch <kbusch@kernel.org>
All error handling path end to the error handling path, except this one.
Go to the error handling branch as well here, otherwise 'icreq' and
'icresp' will leak.
Fixes: 2837966ab2a8 ("nvme-tcp: control message handling for recvmsg()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Simplify nvme_auth_augmented_challenge() by using
crypto_shash_tfm_digest() instead of an alloc+init+update+final
sequence. This should also improve performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Alexandre Ghiti <alexghiti@rivosinc.com> says:
This series optimizes the tlb flushes on riscv which used to simply
flush the whole tlb whatever the size of the range to flush or the size
of the stride.
Patch 3 introduces a threshold that is microarchitecture specific and
will very likely be modified by vendors, not sure though which mechanism
we'll use to do that (dt? alternatives? vendor initialization code?).
* b4-shazam-merge:
riscv: Improve flush_tlb_kernel_range()
riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
riscv: Improve flush_tlb_range() for hugetlb pages
riscv: Improve tlb_flush()
Link: https://lore.kernel.org/r/20231030133027.19542-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This function used to simply flush the whole tlb of all harts, be more
subtile and try to only flush the range.
The problem is that we can only use PAGE_SIZE as stride since we don't know
the size of the underlying mapping and then this function will be improved
only if the size of the region to flush is < threshold * PAGE_SIZE.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, when the range to flush covers more than one page (a 4K page or
a hugepage), __flush_tlb_range() flushes the whole tlb. Flushing the whole
tlb comes with a greater cost than flushing a single entry so we should
flush single entries up to a certain threshold so that:
threshold * cost of flushing a single entry < cost of flushing the whole
tlb.
Co-developed-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
flush_tlb_range() uses a fixed stride of PAGE_SIZE and in its current form,
when a hugetlb mapping needs to be flushed, flush_tlb_range() flushes the
whole tlb: so set a stride of the size of the hugetlb mapping in order to
only flush the hugetlb mapping. However, if the hugepage is a NAPOT region,
all PTEs that constitute this mapping must be invalidated, so the stride
size must actually be the size of the PTE.
Note that THPs are directly handled by flush_pmd_tlb_range().
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Link: https://lore.kernel.org/r/20231030133027.19542-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
For now, tlb_flush() simply calls flush_tlb_mm() which results in a
flush of the whole TLB. So let's use mmu_gather fields to provide a more
fine-grained flush of the TLB.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Link: https://lore.kernel.org/r/20231030133027.19542-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Rather than sprinkle opcode checks in the generic read/write prep handler,
have a separate prep handler for the vectored readv/writev operation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than sprinkle opcode checks in the generic read/write prep handler,
have a separate prep handler for the vectored readv/writev operation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix below compiler warning:
intel_tc.c:1879:11: error: ‘%d’ directive output may be truncated
writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
"%c/TC#%d", port_name(port), tc_port + 1);
^~
intel_tc.c:1878:2: note: ‘snprintf’ output between 7 and 17 bytes
into a destination of size 8
snprintf(tc->port_name, sizeof(tc->port_name),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%c/TC#%d", port_name(port), tc_port + 1);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
v2: use kasprintf(Imre)
v3: use const for port_name, and fix tc mem leak(Imre)
Fixes: 3eafcddf766b ("drm/i915/tc: Move TC port fields to a new intel_tc_port struct")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026125636.5080-1-nirmoy.das@intel.com
(cherry picked from commit 70a3cbbe620ee66afb0c066624196077767e61b2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On GLK CDCLK frequency needs to be at least 2*96 MHz when accessing
the audio hardware. Currently we bump the CDCLK frequency up
temporarily (if not high enough already) whenever audio hardware
is being accessed, and drop it back down afterwards.
With a single active pipe this works just fine as we can switch
between all the valid CDCLK frequencies by changing the cd2x
divider, which doesn't require a full modeset. However with
multiple active pipes the cd2x divider trick no longer works,
and thus we end up blinking all displays off and back on.
To avoid this let's just bump the CDCLK frequency to >=2*96MHz
whenever multiple pipes are active. The downside is slightly
higher power consumption, but that seems like an acceptable
tradeoff. With a single active pipe we can stick to the current
more optiomal (from power comsumption POV) behaviour.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9599
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031160800.18371-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 451eaa1a614c911f5a51078dcb68022874e4cb12)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Handle platforms with multiple GTs by iterate over all GTs.
Add a Fixes commit so this gets propagated for MTL support.
Fixes: 213c43676beb ("drm/i915/mtl: Remove the 'force_probe' requirement for Meteor Lake")
Suggested-by: John Harrison <john.c.harrison@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231025102826.16955-1-nirmoy.das@intel.com
(cherry picked from commit 949113d34fb82a5dc6f5dd3ad9168001b441792b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Zynq QSPI driver has been converted to use spi-mem framework so
add spi-mem to driver kconfig dependencies.
Fixes: 67dca5e580f1 ("spi: spi-mem: Add support for Zynq QSPI controller")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1699037031-702858-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The name currently used to get the clock includes the dapm prefix.
It should use the name as provided to the widget, without the prefix.
Fixes: 3caac759681e ("ASoC: soc-dapm.c: fixup snd_soc_dapm_new_control_unlocked() error handling")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20231106103712.703962-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDMI hotplug callback to the hdmi-codec is currently registered when
jack is set.
The hotplug not only serves to report the ASoC jack state but also to get
the ELD. It should be registered when the component probes instead, so it
does not depend on the card driver registering a jack for the HDMI to
properly report the ELD.
Fixes: 25ce4f2b3593 ("ASoC: hdmi-codec: Get ELD in before reporting plugged event")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20231106104013.704356-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The allocated memory for qdev->dumb_heads should be released
in qxl_destroy_monitors_object before qxl suspend.
otherwise,qxl_create_monitors_object will be called to
reallocate memory for qdev->dumb_heads after qxl resume,
it will cause memory leak.
Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn>
Link: https://lore.kernel.org/r/20230801025309.4049813-1-zhouzongmin@kylinos.cn
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
There is an unusual case that the range map covers right up to the top
of system RAM, but leaves a hole somewhere lower down. Then it prevents
the nvme device dma mapping in the checking path of phys_to_dma() and
causes the hangs at boot.
E.g. On an Armv8 Ampere server, the dsdt ACPI table is:
Method (_DMA, 0, Serialized) // _DMA: Direct Memory Access
{
Name (RBUF, ResourceTemplate ()
{
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x0000000000000000, // Range Minimum
0x00000000FFFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x0000000100000000, // Length
,, , AddressRangeMemory, TypeStatic)
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x0000006010200000, // Range Minimum
0x000000602FFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x000000001FE00000, // Length
,, , AddressRangeMemory, TypeStatic)
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x00000060F0000000, // Range Minimum
0x00000060FFFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x0000000010000000, // Length
,, , AddressRangeMemory, TypeStatic)
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x0000007000000000, // Range Minimum
0x000003FFFFFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x0000039000000000, // Length
,, , AddressRangeMemory, TypeStatic)
})
But the System RAM ranges are:
cat /proc/iomem |grep -i ram
90000000-91ffffff : System RAM
92900000-fffbffff : System RAM
880000000-fffffffff : System RAM
8800000000-bff5990fff : System RAM
bff59d0000-bff5a4ffff : System RAM
bff8000000-bfffffffff : System RAM
So some RAM ranges are out of dma_range_map.
Fix it by checking whether each of the system RAM resources can be
properly encompassed within the dma_range_map.
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch moves dma_addressing_limited() out of line, serving as a
preliminary step to prevent the introduction of a new publicly accessible
low-level helper when validating whether all system RAM is mapped within
the DMA mapping range.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Update T-Head memory type definitions according to C910 doc [1]
For NC and IO, SH property isn't configurable, hardcoded as SH,
so set SH for NOCACHE and IO.
And also set bit[61](Bufferable) for NOCACHE according to the
table 6.1 in the doc [1].
Link: https://github.com/T-head-Semi/openc910 [1]
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Tested-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20230912072510.2510-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Jisheng Zhang <jszhang@kernel.org> says:
This series renews one of my last year RFC patch[1], tries to improve
the vdso layout a bit.
patch1 removes useless symbols
patch2 merges .data section of vdso into .rodata because they are
readonly
patch3 is the real renew patch, it removes hardcoded 0x800 .text start
addr. But I rewrite the commit msg per Andrew's suggestions and move
move .note, .eh_frame_hdr, and .eh_frame between .rodata and .text to
keep the actual code well away from the non-instruction data.
* b4-shazam-merge:
riscv: vdso.lds.S: remove hardcoded 0x800 .text start addr
riscv: vdso.lds.S: merge .data section into .rodata section
riscv: vdso.lds.S: drop __alt_start and __alt_end symbols
Link: https://lore.kernel.org/linux-riscv/20221123161805.1579-1-jszhang@kernel.org/ [1]
Link: https://lore.kernel.org/r/20230912072015.2424-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
I believe the hardcoded 0x800 and related comments come from the long
history VDSO_TEXT_OFFSET in x86 vdso code, but commit 5b9304933730
("x86 vDSO: generate vdso-syms.lds") and commit f6b46ebf904f ("x86
vDSO: new layout") removes the comment and hard coding for x86.
Similar as x86 and other arch, riscv doesn't need the rigid layout
using VDSO_TEXT_OFFSET since it "no longer matters to the kernel".
so we could remove the hard coding now, and removing it brings a
small vdso.so and aligns with other architectures.
Also, having enough separation between data and text is important for
I-cache, so similar as x86, move .note, .eh_frame_hdr, and .eh_frame
between .rodata and .text.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20230912072015.2424-4-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The .data section doesn't need to be separate from .rodata section,
they are both readonly.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20230912072015.2424-3-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
These two symbols are not used, remove them.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20230912072015.2424-2-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Instructions can write to x0, so we should simulate these instructions
normally.
Currently, the kernel hangs if an instruction who writes to x0 is
simulated.
Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Cc: stable@vger.kernel.org
Signed-off-by: Nam Cao <namcaov@gmail.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230829182500.61875-1-namcaov@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
uprobes expects is_trap_insn() to return true for any trap instructions,
not just the one used for installing uprobe. The current default
implementation only returns true for 16-bit c.ebreak if C extension is
enabled. This can confuse uprobes if a 32-bit ebreak generates a trap
exception from userspace: uprobes asks is_trap_insn() who says there is no
trap, so uprobes assume a probe was there before but has been removed, and
return to the trap instruction. This causes an infinite loop of entering
and exiting trap handler.
Instead of using the default implementation, implement this function
speficially for riscv with checks for both ebreak and c.ebreak.
Fixes: 74784081aac8 ("riscv: Add uprobes supported")
Signed-off-by: Nam Cao <namcaov@gmail.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230829083614.117748-1-namcaov@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Yu Chien Peter Lin <peterlin@andestech.com> says:
This patchset enhances PTDUMP by providing additional information
from pagetable entries.
The first patch fixes the RSW field, while the second and third
patches introduce the PBMT and NAPOT fields, respectively, for
RV64 systems.
* b4-shazam-merge:
riscv: Introduce NAPOT field to PTDUMP
riscv: Introduce PBMT field to PTDUMP
riscv: Improve PTDUMP to show RSW with non-zero value
Link: https://lore.kernel.org/r/20230921025022.3989723-1-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch introduces the NAPOT field to PTDUMP, allowing it
to display the letter "N" for pages that have the 63rd bit set.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230921025022.3989723-4-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch introduces the PBMT field to the PTDUMP, so it can
display the memory attributes for NC or IO.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230921025022.3989723-3-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RSW field can be used to encode 2 bits of software
defined information. Currently, PTDUMP only prints
"RSW" when its value is 1 or 3.
To fix this issue and improve the debugging experience
with PTDUMP, we redefine _PAGE_SPECIAL to its original
value and use _PAGE_SOFT as the RSW mask, allow it to
print the RSW with any non-zero value.
This patch also removes the val from the struct prot_bits
as it is no longer needed.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230921025022.3989723-2-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The CMO op macros initially used lower case, as the original iteration
of the ALT_CMO_OP alternative stringified the first parameter to
finalise the assembly for the standard variant.
As a knock-on, the T-Head versions of these CMOs had to use mixed case
defines. Commit dd23e9535889 ("RISC-V: replace cbom instructions with
an insn-def") removed the asm construction with stringify, replacing it
an insn-def macro, rending the lower-case surplus to requirements.
As far as I can tell from a brief check, CBO_zero does not see similar
use and didn't require the mixed case define in the first place.
Replace the lower case characters now for consistency with other
insn-def macros in the standard and T-Head forms, and adjust the
callsites.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230915-aloe-dollar-994937477776@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If misaligned_access_speed percpu var isn't so called "HWPROBE
MISALIGNED UNKNOWN", it means the probe has happened(this is possible
for example, hotplug off then hotplug on one cpu), and the percpu var
has been set, don't probe again in this case.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 584ea6564bca ("RISC-V: Probe for unaligned access speed")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230912154040.3306-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If these config not set, mmc can't run for jh7110, rootfs can't
be found when using SD card. So set CONFIG_MMC_DW=y like arm64
defconfig, and set CONFIG_MMC_DW_STARFIVE=y for starfive. Then
starfive vf2 board can start SD card rootfs with mainline defconfig
and dtb.
Signed-off-by: Jinyu Tang <tangjinyu@tinylab.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230912133128.5247-1-tangjinyu@tinylab.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In the current riscv implementation, blocking syscalls like read() may
not correctly restart after being interrupted by ptrace. This problem
arises when the syscall restart process in arch_do_signal_or_restart()
is bypassed due to changes to the regs->cause register, such as an
ebreak instruction.
Steps to reproduce:
1. Interrupt the tracee process with PTRACE_SEIZE & PTRACE_INTERRUPT.
2. Backup original registers and instruction at new_pc.
3. Change pc to new_pc, and inject an instruction (like ebreak) to this
address.
4. Resume with PTRACE_CONT and wait for the process to stop again after
executing ebreak.
5. Restore original registers and instructions, and detach from the
tracee process.
6. Now the read() syscall in tracee will return -1 with errno set to
ERESTARTSYS.
Specifically, during an interrupt, the regs->cause changes from
EXC_SYSCALL to EXC_BREAKPOINT due to the injected ebreak, which is
inaccessible via ptrace so we cannot restore it. This alteration breaks
the syscall restart condition and ends the read() syscall with an
ERESTARTSYS error. According to include/linux/errno.h, it should never
be seen by user programs. X86 can avoid this issue as it checks the
syscall condition using a register (orig_ax) exposed to user space.
Arm64 handles syscall restart before calling get_signal, where it could
be paused and inspected by ptrace/debugger.
This patch adjusts the riscv implementation to arm64 style, which also
checks syscall using a kernel register (syscallno). It ensures the
syscall restart process is not bypassed when changes to the cause
register occur, providing more consistent behavior across various
architectures.
For a simplified reproduction program, feel free to visit:
https://github.com/ancientmodern/riscv-ptrace-bug-demo.
Signed-off-by: Haorong Lu <ancientmodern4@gmail.com>
Link: https://lore.kernel.org/r/20230803224458.4156006-1-ancientmodern4@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Clément Léger <cleger@rivosinc.com> says:
Since commit 61cadb9 ("Provide new description of misaligned load/store
behavior compatible with privileged architecture.") in the RISC-V ISA
manual, it is stated that misaligned load/store might not be supported.
However, the RISC-V kernel uABI describes that misaligned accesses are
supported. In order to support that, this series adds support for S-mode
handling of misaligned accesses as well support for prctl(PR_UNALIGN).
Handling misaligned access in kernel allows for a finer grain control
of the misaligned accesses behavior, and thanks to the prctl() call,
can allow disabling misaligned access emulation to generate SIGBUS. User
space can then optimize its software by removing such access based on
SIGBUS generation.
This series is useful when using a SBI implementation that does not
handle misaligned traps as well as detecting misaligned accesses
generated by userspace application using the prctrl(PR_SET_UNALIGN)
feature.
This series can be tested using the spike simulator[1] and a modified
openSBI version[2] which allows to always delegate misaligned load/store to
S-mode. A test[3] that exercise various instructions/registers can be
executed to verify the unaligned access support.
[1] https://github.com/riscv-software-src/riscv-isa-sim
[2] https://github.com/rivosinc/opensbi/tree/dev/cleger/no_misaligned
[3] https://github.com/clementleger/unaligned_test
* b4-shazam-merge:
riscv: add support for PR_SET_UNALIGN and PR_GET_UNALIGN
riscv: report misaligned accesses emulation to hwprobe
riscv: annotate check_unaligned_access_boot_cpu() with __init
riscv: add support for sysctl unaligned_enabled control
riscv: add floating point insn support to misaligned access emulation
riscv: report perf event for misaligned fault
riscv: add support for misaligned trap handling in S-mode
riscv: remove unused functions in traps_misaligned.c
Link: https://lore.kernel.org/r/20231004151405.521596-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now that we converted cephfs internally to account for idmapped mounts
allow the creation of idmapped mounts on by setting the FS_ALLOW_IDMAP
flag.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Enable ceph_atomic_open() to handle idmapped mounts. This is just a
matter of passing down the mount's idmapping.
[ aleksandr.mikhalitsyn: adapted to 5fadbd9929 ("ceph: rely on vfs for
setgid stripping") ]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Enable ceph_set_acl() to handle idmapped mounts. This is just a matter
of passing down the mount's idmapping.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Enable __ceph_setattr() to handle idmapped mounts. This is just a matter
of passing down the mount's idmapping.
[ aleksandr.mikhalitsyn: adapted to b27c82e12965 ("attr: port attribute
changes to new types") ]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Just pass down the mount's idmapping to __ceph_setattr,
because we will need it later.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Enable ceph_permission() to handle idmapped mounts. This is just a
matter of passing down the mount's idmapping.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Enable ceph_getattr() to handle idmapped mounts. This is just a matter
of passing down the mount's idmapping.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Enable mknod/symlink/mkdir iops to handle idmapped mounts.
This is just a matter of passing down the mount's idmapping.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This parameter is used to decide if we allow
to perform IO on idmapped mount in case when MDS lacks
support of CEPHFS_FEATURE_HAS_OWNER_UIDGID feature.
In this case we can't properly handle MDS permission
checks and if UID/GID-based restrictions are enabled
on the MDS side then IO requests which go through an
idmapped mount may fail with -EACCESS/-EPERM.
Fortunately, for most of users it's not a case and
everything should work fine. But we put work "unsafe"
in the module parameter name to warn users about
possible problems with this feature and encourage
update of cephfs MDS.
Suggested-by: Stéphane Graber <stgraber@ubuntu.com>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Inode operations that create a new filesystem object such as ->mknod,
->create, ->mkdir() and others don't take a {g,u}id argument explicitly.
Instead the caller's fs{g,u}id is used for the {g,u}id of the new
filesystem object.
In order to ensure that the correct {g,u}id is used map the caller's
fs{g,u}id for creation requests. This doesn't require complex changes.
It suffices to pass in the relevant idmapping recorded in the request
message. If this request message was triggered from an inode operation
that creates filesystem objects it will have passed down the relevant
idmaping. If this is a request message that was triggered from an inode
operation that doens't need to take idmappings into account the initial
idmapping is passed down which is an identity mapping.
This change uses a new cephfs protocol extension CEPHFS_FEATURE_HAS_OWNER_UIDGID
which adds two new fields (owner_{u,g}id) to the request head structure.
So, we need to ensure that MDS supports it otherwise we need to fail
any IO that comes through an idmapped mount because we can't process it
in a proper way. MDS server without such an extension will use caller_{u,g}id
fields to set a new inode owner UID/GID which is incorrect because caller_{u,g}id
values are unmapped. At the same time we can't map these fields with an
idmapping as it can break UID/GID-based permission checks logic on the
MDS side. This problem was described with a lot of details at [1], [2].
[1] https://lore.kernel.org/lkml/CAEivzxfw1fHO2TFA4dx3u23ZKK6Q+EThfzuibrhA3RKM=ZOYLg@mail.gmail.com/
[2] https://lore.kernel.org/all/20220104140414.155198-3-brauner@kernel.org/
Link: https://github.com/ceph/ceph/pull/52575
Link: https://tracker.ceph.com/issues/62217
Co-Developed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When sending a mds request cephfs will send relevant data for the
requested operation. For creation requests the caller's fs{g,u}id is
used to set the ownership of the newly created filesystem object. For
setattr requests the caller can pass in arbitrary {g,u}id values to
which the relevant filesystem object is supposed to be changed.
If the caller is performing the relevant operation via an idmapped mount
cephfs simply needs to take the idmapping into account when it sends the
relevant mds request.
In order to support idmapped mounts for cephfs we stash the idmapping
whenever they are relevant for the operation for the duration of the
request. Since mds requests can be queued and performed asynchronously
we make sure to keep the idmapping around and release it once the
request has finished.
In follow-up patches we will use this to send correct ownership
information over the wire. This patch just adds the basic infrastructure
to keep the idmapping around. The actual conversion patches are all
fairly minimal.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
These helpers are required to support idmapped mounts in CephFS.
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The mdsmap.h is only used by CephFS, so move it to fs/ceph.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Multiple CephFS mounts on a host is increasingly common so
disambiguating messages like this is necessary and will make it easier
to debug issues.
At the same this will improve the debug logs to make them easier to
troubleshooting issues, such as print the ino# instead only printing
the memory addresses of the corresponding inodes and print the dentry
names instead of the corresponding memory addresses for the dentry,etc.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We need to covert the inode to ceph_client in the following commit,
and will add one new helper for that, here we rename the old helper
to _fs_client().
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We will use the 'mdsc' to get the global_id in the following commits.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This will help print the fsid and client's global_id in debug logs,
and also print the function names.
[ idryomov: %lld -> %llu, leading space for doutc(), don't include
__func__ in pr_*() variants ]
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
io_uring does non-blocking connection attempts, which can yield some
unexpected results if a connect request is re-attempted by an an
application. This is equivalent to the following sync syscall sequence:
sock = socket(AF_INET, SOCK_STREAM | SOCK_NONBLOCK, IPPROTO_TCP);
connect(sock, &addr, sizeof(addr);
ret == -1 and errno == EINPROGRESS expected here. Now poll for POLLOUT
on sock, and when that returns, we expect the socket to be connected.
But if we follow that procedure with:
connect(sock, &addr, sizeof(addr));
you'd expect ret == -1 and errno == EISCONN here, but you actually get
ret == 0. If we attempt the connection one more time, then we get EISCON
as expected.
io_uring used to do this, but turns out that bluetooth fails with EBADFD
if you attempt to re-connect. Also looks like EISCONN _could_ occur with
this sequence.
Retain the ->in_progress logic, but work-around a potential EISCONN or
EBADFD error and only in those cases look at the sock_error(). This
should work in general and avoid the odd sequence of a repeated connect
request returning success when the socket is already connected.
This is all a side effect of the socket state being in a CONNECTING
state when we get EINPROGRESS, and only a re-connect or other related
operation will turn that into CONNECTED.
Cc: stable@vger.kernel.org
Fixes: 3fb1bd688172 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT")
Link: https://github.com/axboe/liburing/issues/980
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The new read multishot method doesn't need to allocate async data ever,
as it doesn't do vectored IO and it must only be used with provided
buffers. While it doesn't have ->prep_async() set, it also sets
->async_size to 0, which is different from any other read/write type we
otherwise support.
If it's used on a file type that isn't pollable, we do try and allocate
this async data, and then try and use that data. But since we passed in
a size of 0 for the data, we get a NULL back on data allocation. We then
proceed to dereference that to copy state, and that obviously won't end
well.
Add a check in io_setup_async_rw() for this condition, and avoid copying
state. Also add a check for whether or not buffer selection is specified
in prep while at it.
Fixes: fc68fcda0491 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218101
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Property 'playback-codecs' is referenced as 'speaker-codec' in the error
message, and this can lead to confusion.
Correct the error message such that the correct property name is
referenced.
Fixes: 0da16e370dd7 ("ASoC: mediatek: mt8186: add machine driver with mt6366, rt1019 and rt5682s")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231031103139.77395-1-eugen.hristev@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Micron MTFC4GACAJCN eMMC supports cache but requires that flush cache
operation be allowed only after a write has occurred. Otherwise, the
cache flush command or subsequent commands will time out.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231030224809.59245-1-beanhuo@iokpp.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
ti,otap-del-sel-legacy/ti,itap-del-sel-legacy passed from DT
are currently ignored for all SD/MMC and eMMC modes. Fix this
by making start loop index to MMC_TIMING_LEGACY.
Fixes: 8ee5fc0e0b3b ("mmc: sdhci_am654: Update OTAPDLY writes")
Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231026061458.1116276-1-n-yadav@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Fix these two error paths:
1. When set_memory_decrypted() fails, pages may be left fully or partially
decrypted.
2. Decrypted pages may be freed if swiotlb_alloc_tlb() determines that the
physical address is too high.
To fix the first issue, call set_memory_encrypted() on the allocated region
after a failed decryption attempt. If that also fails, leak the pages.
To fix the second issue, check that the TLB physical address is below the
requested limit before decrypting.
Let the caller differentiate between unsuitable physical address (=> retry
from a lower zone) and allocation failures (=> no point in retrying).
Cc: stable@vger.kernel.org
Fixes: 79636caad361 ("swiotlb: if swiotlb is full, fall back to a transient memory pool")
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Merge series from wangweidong.a@awinic.com:
The maximum value that calib can set should be
consistent with the maximum value of re.
An error code should be return when the re is greater
than the maximum value or less than the minimum value
The value of vsense_select should be either 32
or 0 in both cases, so modify the
AW88399_DEV_VDSEL_VSENSE macro to 32.
Now that trap support is ready to handle misalignment errors in S-mode,
allow the user to control the behavior of misaligned accesses using
prctl(PR_SET_UNALIGN). Add an align_ctl flag in thread_struct which
will be used to determine if we should SIGBUS the process or not on
such fault.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-9-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
hwprobe provides a way to report if misaligned access are emulated. In
order to correctly populate that feature, we can check if it actually
traps when doing a misaligned access. This can be checked using an
exception table entry which will actually be used when a misaligned
access is done from kernel mode.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-8-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This function is solely called as an initcall, thus annotate it with
__init.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-7-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This sysctl tuning option allows the user to disable misaligned access
handling globally on the system. This will also be used by misaligned
detection code to temporarily disable misaligned access handling.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-6-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This support is partially based of openSBI misaligned emulation floating
point instruction support. It provides support for the existing
floating point instructions (both for 32/64 bits as well as compressed
ones). Since floating point registers are not part of the pt_regs
struct, we need to modify them directly using some assembly. We also
dirty the pt_regs status in case we modify them to be sure context
switch will save FP state. With this support, Linux is on par with
openSBI support.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-5-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Misalignment trap handling is only supported for M-mode and uses direct
accesses to user memory. In S-mode, when handling usermode fault, this
requires to use the get_user()/put_user() accessors. Implement
load_u8(), store_u8() and get_insn() using these accessors for
userspace and direct text access for kernel.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-3-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Replace macros by the only two function calls that are done from this
file, store_u8() and load_u8().
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-2-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When DA7219 is suspended, prevent the AAD IRQ handler is unexpectedly
executed and cause the I2C driver "Transfer while suspended" failure.
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20231101022507.6226-1-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The value of vsense_select should be either 32
or 0 in both cases, so modify the
AW88399_DEV_VDSEL_VSENSE macro to 32.
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20231101090211.177125-4-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I2S mode register field will be set to 1 when tdm mode is enabled.
Update the I2S mode field based on tdm_mode flag check.
This will fix below smatch checker warning.
sound/soc/amd/acp/acp-i2s.c:59 acp_set_i2s_clk()
warn: odd binop '0x0 & 0x2'
Fixes: 40f74d5f09d7 ("ASoC: amd: acp: refactor acp i2s clock
generation code")
Reported-By: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20231031135949.1064581-3-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clang warns (or errors with CONFIG_WERROR=y):
sound/soc/codecs/aw88399.c:441:18: error: variable 'vsense_select' is uninitialized when used here [-Werror,-Wuninitialized]
441 | vsense_select = vsense_select & (~AW88399_VDSEL_MASK);
| ^~~~~~~~~~~~~
sound/soc/codecs/aw88399.c:431:28: note: initialize the variable 'vsense_select' to silence this warning
431 | unsigned int vsense_select, vsense_value;
| ^
| = 0
1 error generated.
This clearly should have been using the value received from
regmap_read(). Use the correct variable to resolve the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1952
Fixes: 8ade6cc7e261 ("ASoC: codecs: Add aw88399 amplifier driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20231027-asoc-aw88399-fix-wuninitialized-v1-1-b1044493e4cd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Sometimes the codec probe would be called earlier than the hardware initialization.
Therefore, the speaker route should be added before the the first_hw_init check.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Fixes: f3da2ed110e2 ("ASoC: rt1712-sdca: enable pm_runtime in probe, keep status as 'suspended'")?
Link: https://lore.kernel.org/r/20231030103644.1787948-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 9958d85968ed ("ASoC: Use device_get_match_data()") dropped the
unconditional use of rockchip_i2s_tdm_match resulting in this warning:
sound/soc/rockchip/rockchip_i2s_tdm.c:1315:34: warning: 'rockchip_i2s_tdm_match' defined but not used [-Wunused-const-variable=]
The fix is to drop of_match_ptr() which is not necessary because DT is
always used for this driver.
Fixes: 9958d85968ed ("ASoC: Use device_get_match_data()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310121802.CDAGVdF2-lkp@intel.com/
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231030142337.814907-2-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to check for an active device as otherwise we get warnings
for some mcbsp instances for "Runtime PM usage count underflow!".
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231030052340.13415-1-tony@atomide.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When i915 perf interface is not available dereferencing it will lead to
NULL dereferences.
As returning -ENOTSUPP is pretty clear return when perf interface is not
available.
Fixes: 2fec539112e8 ("i915/perf: Replace DRM_DEBUG with driver specific drm_dbg call")
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027172822.2753059-1-harshit.m.mogalapalli@oracle.com
[tursulin: added stable tag]
(cherry picked from commit 36f27350ff745bd228ab04d7845dfbffc177a889)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
eDP specification supports HBR3 link rate since v1.4a. Moreover,
C10 phy can support HBR3 link rate for both DP and eDP. Therefore,
do not clamp the supported rates for eDP at 6.75Gbps.
Cc: <stable@vger.kernel.org>
BSpec: 70073 74224
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018113622.2761997-1-chaitanya.kumar.borah@intel.com
(cherry picked from commit a3431650f30a94b179d419ef87c21213655c28cd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
gen8_ggtt_invalidate() is only needed for limited set of platforms
where GGTT is mapped as WC. This was added as way to fix WC based GGTT in
commit 0f9b91c754b7 ("drm/i915: flush system agent TLBs on SNB") and
there are no reference in HW docs that forces us to use this on non-WC
backed GGTT.
This can also cause unwanted side-effects on XE_HP platforms where
GFX_FLSH_CNTL_GEN6 is not valid anymore.
v2: Add a func to detect wc ggtt detection (Ville)
v3: Improve commit log and add reference commit (Daniel)
Fixes: d2eae8e98d59 ("drm/i915/dg2: Drop force_probe requirement")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org> # v6.2+
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018093815.1349-1-nirmoy.das@intel.com
(cherry picked from commit 81de3e296b10a13e5c9f13172825b0d8d9495c68)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The newly added memset() causes a warning for some reason I could not
figure out:
In file included from arch/x86/include/asm/string.h:3,
from drivers/gpu/drm/i915/gt/intel_rc6.c:6:
In function 'rc6_res_reg_init',
inlined from 'intel_rc6_init' at drivers/gpu/drm/i915/gt/intel_rc6.c:610:2:
arch/x86/include/asm/string_32.h:195:29: error: '__builtin_memset' writing 16 bytes into a region of size 0 overflows the destination [-Werror=stringop-overflow=]
195 | #define memset(s, c, count) __builtin_memset(s, c, count)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_rc6.c:584:9: note: in expansion of macro 'memset'
584 | memset(rc6->res_reg, INVALID_MMIO_REG.reg, sizeof(rc6->res_reg));
| ^~~~~~
In function 'intel_rc6_init':
Change it to an normal initializer and an added memcpy() that does not have
this problem.
Fixes: 4bb9ca7ee074 ("drm/i915/mtl: C6 residency and C state type for MTL SAMedia")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016201012.1022812-1-arnd@kernel.org
(cherry picked from commit 0520b30b219053cd789909bca45b3c486ef3ee09)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT is invoked with the
DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE flag set but no fence has yet been
submitted for the given timeline point the call will fail immediately
with EINVAL. This does not match the intended behavior where the call
should wait until the fence has been submitted (or the timeout expires).
The following small example program illustrates the issue. It should
wait for 5 seconds and then print ETIME, but instead it terminates right
away after printing EINVAL.
#include <stdio.h>
#include <fcntl.h>
#include <time.h>
#include <errno.h>
#include <xf86drm.h>
int main(void)
{
int fd = open("/dev/dri/card0", O_RDWR);
uint32_t syncobj;
drmSyncobjCreate(fd, 0, &syncobj);
struct timespec ts;
clock_gettime(CLOCK_MONOTONIC, &ts);
uint64_t point = 1;
if (drmSyncobjTimelineWait(fd, &syncobj, &point, 1,
ts.tv_sec * 1000000000 + ts.tv_nsec + 5000000000, // 5s
DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE, NULL)) {
printf("drmSyncobjTimelineWait failed %d\n", errno);
}
}
Fixes: 01d6c3578379 ("drm/syncobj: add support for timeline point wait v8")
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Reviewed by: Simon Ser <contact@emersion.fd>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/1fac96f1-2f3f-f9f9-4eb0-340f27a8f6c0@nvidia.com
The VC4 mock helpers allocate the CRTC, encoders and connectors using a
call to kunit_kzalloc(), but the DRM device they are attache to survives
for longer than the test itself which leads to use-after-frees reported
by KASAN.
Switch to drmm_kzalloc to tie the lifetime of these objects to the main
DRM device.
Fixes: f759f5b53f1c ("drm/vc4: tests: Introduce a mocking infrastructure")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYvJA2HGqzR9LGgq63v0SKaUejHAE6f7+z9cwWN-ourJ_g@mail.gmail.com/
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024105640.352752-1-mripard@kernel.org
After a discussion about removing VLYNQ support from the Kernel, it was
concluded that its only user, the AR7 platform can go [1]. Even OpenWRT
has removed support because these devices are "stuck with 3.18" [2].
[1] https://lore.kernel.org/r/3395161f-2543-46f0-83d9-b918800305e1@gmail.com
[2] https://openwrt.org/docs/techref/targets/ar7
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
AR7 is going to be removed from the Kernel, so remove its watchdog
support. This allows us to remove the platform because this driver
includes a platform specific header.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are no users with a vlynq_driver in the Kernel tree. Also, only
the AR7 platform ever initialized a VLYNQ bus, but AR7 is going to be
removed from the Kernel. OpenWRT had some out-of-tree drivers which they
probably intended to upport, but AR7 devices are even there not
supported anymore because they are "stuck with Kernel
3.18" [1]. This code can go.
[1] https://openwrt.org/docs/techref/targets/ar7
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
AR7 is going to be removed from the Kernel, so remove its support for
MTD.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
AR7 is going to be removed from the Kernel, so remove its type
definition from 8250 code. As with previous removals, I checked with
Debian Code Search that 'PORT_AR7' is not used in userspace.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
ReiserFS has been deprecated for a year and a half, yet is still built
as part of a defconfig kernel.
According to commit eb103a51640e ("reiserfs: Deprecate reiserfs"), the
filesystem is slated to be removed in 2025. Remove it from the defconfig
profiles now, as part of its deprecation process.
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
arch/mips/pci/fixup-lantiq.c requires nothing from <linux/of_irq.h>, so
remove the include of it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After bbd8810d3998 ("PCI: Remove unused includes and superfluous struct
declaration"), <linux/of_pci.h> no longer includes <linux/pci.h>, which
provides the extern declarations for pcibios_plat_dev_init() and
pcibios_map_irq() via <asm/pci.h>.
This results in these new warnings:
arch/mips/pci/fixup-lantiq.c:13:5: warning: no previous prototype for 'pcibios_plat_dev_init' [-Wmissing-prototypes]
arch/mips/pci/fixup-lantiq.c:24:5: warning: no previous prototype for 'pcibios_map_irq' [-Wmissing-prototypes]
Include <linux/pci.h> directly to get these declarations.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070445.tzRBNYRC-lkp@intel.com/
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 411740f5422a ("KVM: MIPS/MMU: Implement KVM_CAP_SYNC_MMU")
old_pte is no longer used in kvm_mips_map_page(). So remove it to fix a
build warning about variable set but not used:
arch/mips/kvm/mmu.c: In function 'kvm_mips_map_page':
>> arch/mips/kvm/mmu.c:701:29: warning: variable 'old_pte' set but not used [-Wunused-but-set-variable]
701 | pte_t *ptep, entry, old_pte;
| ^~~~~~~
Cc: stable@vger.kernel.org
Fixes: 411740f5422a960 ("KVM: MIPS/MMU: Implement KVM_CAP_SYNC_MMU")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070530.aARZCSfh-lkp@intel.com/
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are two adjacent "b" instructions, the second one is unreachable,
it is dead code, just remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Rename GB-PC1 to GnuBee GB-PC1, and GB-PC2 to GnuBee GB-PC2 to include
brand and model name.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Each item of the resets property should define a reset. Split the item with
two resets on the ethernet node into two separate items.
Sort the items of the clocks property to the same line as a trivial change.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The "probe-type" property was only needed when used with the
(long obsolete) "direct-mapped" compatible value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Since commit 7b3415f581c7 ("MIPS: Loongson32: Remove
unused platform devices"), struct plat_ls1x_dma and plat_ls1x_nand
are unused. Then, dma.h and nand.h are useless.
Therefore, remove these useless header files.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-10-06 10:10:13 +02:00
370 changed files with 7125 additions and 7529 deletions
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.