clang found that the "offset" in bmp580_trigger_handler doesn't get
initialized before access. Add proper initialization to this variable.
Signed-off-by: Yo-Jung Lin (Leo) <0xff07@gmail.com>
Link: https://patch.msgid.link/20241011115334.367736-1-0xff07@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmcDD/seHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGNpoH/3oEXaHBl5wrRJKP
GpzfT35Do052IZnRl0dmanr92opV5O7R4esVyHIS4IOKkt7C2aEEoVrMKAqW/VH9
EkcLPJwOuJ1xyqnLWycQUEN/JK9hxM9DlAVUVg9JdbDE4b91ebwTivwJMTJ7tQwm
+P/ifzV1r4fsYgpasqwVQMwLWuZ8O6OCGXE4KlgwiaS5zLdiVG+zkvvli/x/YHQ9
dPgQ+OXyoQz57Iwj02ZHBkdqJxa9vPVPASjtzuRp0v7VGaMq8gvVH8pA4B7cGjfV
xWvT+sjYjXVltYfmUHgUDNNTfeJArxH+BqpJ+lShcYwjxomYFfJWT0KZOPQwg/3z
zfAZtk4=
=RHAh
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc2' into test2
Linux 6.12-rc2
Resolved movement of asm/unaligned.h to linux/unaligned.h
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/iio/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in several files.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20241009060056.502059-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To use spi_get_device_match_data(), add the chip_info structure to the
of_device_id table which is always a good thing to do.
While at it, added dedicated variables for each chip (instead of the
harder to maintain array) and added a new string variable for the part
name.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241009-dev-adf4371-minor-improv-v1-1-97f4f22ed941@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is a check on non-zero ret that is redundant because the
same check is being performed in a previous if statement and
also before that. The check is not required, remove it.
Signed-off-by: Colin Ian King <colin.i.king@intel.com>
Link: https://patch.msgid.link/20241010170835.772764-1-colin.i.king@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Implement SPI driver for the Bosch BMI270 6-axis IMU. Provide raw read
write access to acceleration and angle velocity measurements via the SPI
interface on the device.
Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patch.msgid.link/20241002033628.681812-1-lanzano.alex@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- Move non-boot built-in DTBs to the .rodata section
- Fix Kconfig bugs
- Fix maint scripts in the linux-image Debian package
- Import some list macros to scripts/include/
-----BEGIN PGP SIGNATURE-----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=1a8G
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move non-boot built-in DTBs to the .rodata section
- Fix Kconfig bugs
- Fix maint scripts in the linux-image Debian package
- Import some list macros to scripts/include/
* tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: Remove blank first line from maint scripts
kbuild: fix a typo dt_binding_schema -> dt_binding_schemas
scripts: import more list macros
kconfig: qconf: fix buffer overflow in debug links
kconfig: qconf: move conf_read() before drawing tree pain
kconfig: clear expr::val_is_valid when allocated
kconfig: fix infinite loop in sym_calc_choice()
kbuild: move non-boot built-in DTBs to .rodata section
Highlights:
- Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake laptops
- Intel Diamond Rapids hw-id additions
- Documentation and MAINTAINERS fixes
- Some other small fixes
The following is an automated git shortlog grouped by driver:
ISST:
- Add Diamond Rapids to support list
- Fix the KASAN report slab-out-of-bounds bug
MAINTAINERS:
- Update Intel In Field Scan(IFS) entry
dell-ddv:
- Fix typo in documentation
dell-laptop:
- Do not fail when encountering unsupported batteries
dell-sysman:
- add support for alienware products
intel/pmc:
- Disable ACPI PM Timer disabling on Sky and Kaby Lake
platform/x86/intel:
- power-domains: Add Diamond Rapids support
wmi:
- Update WMI driver API documentation
x86-android-tablets:
- Fix use after free on platform_device_register() errors
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmcCbogUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xFEgf/UYsNHFO5P5IVwWIoXzyFgRNg8zQU
trABCxfCZztZOEwRVJKZ0lVLbkKULdBJE4Tj7RwhZiCubcupV5LJT5OLe5R+AFGK
qhG2FTo9uHacwEXPMZyBAnj+aW6sSnVATAQgBZFnZ0SdInuOjlAmMvAL48MfNnEO
Nw7EiGtAvkl7R9XHBsF7vs6EFewjy+ZFMoslZq90UUhfK51DCu74w7hv8vY5oG50
pstbW3aqn5nmCKcPhQNW7ZmG6ukpdKkl74u1hdW6JRuBruFrZWR6px1xax6+Q/Is
/ib4x69irCN+sBTX7fGTPNsO+Oaq0GmUfeiGdcZA2SjmIJ8P4yvPAuNBbw==
=Nfjz
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake
laptops
- Intel Diamond Rapids hw-id additions
- Documentation and MAINTAINERS fixes
- Some other small fixes
* tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
platform/x86: wmi: Update WMI driver API documentation
platform/x86: dell-ddv: Fix typo in documentation
platform/x86: dell-sysman: add support for alienware products
platform/x86/intel: power-domains: Add Diamond Rapids support
platform/x86: ISST: Add Diamond Rapids to support list
platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
MAINTAINERS: Update Intel In Field Scan(IFS) entry
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
* Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
* Make sure that the host's vector length is at capped by a value
common to all CPUs
* Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
* Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
* Fix compilation with KVM_INTEL=KVM_AMD=n
* Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
* Fix compilation on non-x86 architectures
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcCRMgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMNIgf/T80+VxFy7eP1yTkZy9nd3UjSsAeT
fWvYMyN2isOTWTVbl3ckjMZc4i7L/nOngxfkLzI3OfFUO8TI8cw11hNFn85m+WKM
95DVgEaqz1kuJg25VjSj9AySvPFDNec8bV37C2vk2jF4YsGo6qBugSSjktZUgGiW
ozsdV39lcVcLf+x8/52Vc2eb736nrrYg8QaFP0tEQs9MHuYob/XBw3Zx42dJoZYl
tCjGP5oW7EvUdRD48GkgXP9DWA12QmDxNOHEmUdxWamsK88YQXFyWwb7uwV5x+hd
mO3bJaYInkJsh3D2e5QARswQb+D5HMVYFwvEkxQF/wvmcMosRVz4vv65Sw==
=P4uw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
- Allow r30 to be used in vDSO code generation of getrandom.
Thanks to: Jason A. Donenfeld.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRjvi15rv0TSTaE+SIF0oADX8seIQUCZwIxiwAKCRAF0oADX8se
IbuQAQCzv/PrtxVkqQja5cTZeC/rrV4M1jIKsLpYe1voX3mDSAEA5NTime3l5VXm
SdsiFUBVa4fzp8Ipu9r98wVEGtm/SQw=
=ARIU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Allow r30 to be used in vDSO code generation of getrandom
Thanks to Jason A. Donenfeld
* tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: allow r30 in vDSO code generation of getrandom
The blank line causes execve() to fail:
# strace ./postinst
execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
strace: exec: Exec format error
+++ exited with 1 +++
However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.
Fixes: b611daae5efc ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If we follow "make help" to "make dt_binding_schema", we will see
below error:
$ make dt_binding_schema
make[1]: *** No rule to make target 'dt_binding_schema'. Stop.
make: *** [Makefile:224: __sub-make] Error 2
It should be a typo. So this will fix it.
Fixes: 604a57ba9781 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The veml6035 is an ALS that shares most of its functionality with the
veml6030, which allows for some code recycling.
Some chip-specific properties differ and dedicated functions to get and
set the sensor gain as well as its initialization are required.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-9-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The veml6035 is a similar ambient light sensor to the veml6030, and
from the bindings point of view, it shares the same properties. Its
only difference in that respect is a different I2C address.
Estend the existing bindings to support the veml6035 ALS.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-8-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move devm_add_action_or_reset() with a device shut down action to the
hardware initialization function to ensure that any error path after
powering on the device leads to a power off. Add struct device *dev
to the argument list to clarify the device the action is registered
against, and use it wherever &client->dev was used.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-7-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The resolution of the WHITE channel is not provided by the manufacturer,
neither in the datasheet nor in the application note (even their
proprietary application only processes the ALS channel, giving raw
values for WHITE).
The current implementation assumes that both resolutions are identical,
which is extremely unlikely, especially for photodiodes with different
spectral responses.
Drop the processed information as it is meaningless.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-6-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drop custom attributes by using the standard read_avail() callback to
read scale and integration time. When at it, add the integration time
and scale attributes fro the WHITE channel, as they modify its value as
well. To avoid breaking the current ABI, these attributes must be kept
as separate for both channels even though they are shared under the
hood.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-5-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the device managed function from the regulator API to get and enable
a regulator powering the device.
Use "vdd" as the ID to account for the provided name in the datasheet.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-4-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add vdd-supply to account for the sensor's power source.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-3-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the more convenient dev_err_probe() to get rid of the dev_err() +
return sequence in the probe error paths.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-2-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The veml6030 requires a delay of 4 ms after activating the sensor. That
is done correctly during the hw initialization, but it's missing after
resuming.
Move the delay to the power on function to make sure that it is always
observerd. When at it, use fsleep() instead of usleep_range() as such a
narrow range is not required.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-1-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The adc values coming directly from the sensor in the BM{E,P}{2,3}xx
sensors are unsigned values so treat them as such.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240930202353.38203-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
After contributing the driver, add myself as the maintainer for the
GE HealthCare PCM ADC IIO driver.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://patch.msgid.link/20241003114641.672086-5-herve.codina@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The GE HealthCare PMC Analog to Digital Converter (ADC) is a 16-Channel
(voltage and current), 16-Bit ADC with an I2C Interface.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Ian Ray <ian.ray@gehealthcare.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241003114641.672086-4-herve.codina@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The GE HealthCare PMC Analog to Digital Converter (ADC) is a 16-Channel
(voltage and current), 16-Bit ADC with an I2C Interface.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Ian Ray <ian.ray@gehealthcare.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241003114641.672086-3-herve.codina@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().
When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed.
Fixes: 5eba0141206e ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs")
Fixes: e2200d3f26da ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()")
Cc: stable@vger.kernel.org
Reported-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com
The WMI driver core now passes the WMI event data to legacy notify
handlers, so WMI devices sharing notification IDs are now being
handled properly.
Fixes: e04e2b760ddb ("platform/x86: wmi: Pass event data directly to legacy notify handlers")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241005213825.701887-1-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Alienware supports firmware-attributes and has its own OEM string.
Signed-off-by: Crag Wang <crag_wang@dell.com>
Link: https://lore.kernel.org/r/20241004152826.93992-1-crag_wang@dell.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There have been multiple reports that the ACPI PM Timer disabling is
causing Sky and Kaby Lake systems to hang on all suspend (s2idle, s3,
hibernate) methods.
Remove the acpi_pm_tmr_ctl_offset and acpi_pm_tmr_disable_bit settings from
spt_reg_map to disable the ACPI PM Timer disabling on Sky and Kaby Lake to
fix the hang on suspend.
Fixes: e86c8186d03a ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/linux-pm/18784f62-91ff-4d88-9621-6c88eb0af2b5@molgen.mpg.de/
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219346
Cc: Marek Maslanka <mmaslanka@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360/0596KF
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20241003202614.17181-2-hdegoede@redhat.com
If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.
On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.
Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org>
Fixes: ab58016c68cc ("platform/x86:dell-laptop: Add knobs to change battery charge settings")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Ashok is no longer with Intel and his e-mail address will start bouncing
soon. Update his email address to the new one he provided to ensure
correct contact details in the MAINTAINERS file.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20241001170808.203970-1-jithu.joseph@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
-----BEGIN PGP SIGNATURE-----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=Rtrz
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
