Add the properties 'skew-delay-input-ps' and 'skew-delay-output-ps'
to the generic parameters used for parsing DT files. This allows to
specify the independent skew delay value for the two directions.
This enables drivers that use the generic pin configuration to get
the value passed through these new properties.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Allow a generic pinconf property to specify its argument as one of
the strings in a match list.
Convert the matching string to an integer value using the index in
the list, then keep using this value in the generic pinconf code.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There are two pin-controllers on Cix Sky1 platform.
one is used under S0 state, the other is used under S0 and S5 state.
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
[Dropped pinctrl_provide_dummies()]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pin-controller is used to control the Soc pins.
There are two pin-controllers on Cix Sky1 platform.
One is used under S0 state, the other is used under
S0 and S5 state.
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the new gpio2 and iomux0 drivers and bindings to the existing entry
for Microchip RISC-V devices.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On Polarfire SoC, iomux0 is responsible for routing functions to either
Multiprocessor Subsystem (MSS) IOs or to the FPGA fabric, where they
can either interface with custom RTL or be routed to the FPGA fabric's
IOs. Add a driver for it.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On Polarfire SoC, iomux0 is responsible for routing functions to either
Multiprocessor Subsystem (MSS) IOs or to the FPGA fabric, where they
can either interface with custom RTL or be routed to the FPGA fabric's
IOs. Document it.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pic64gx has a second pinmux "downstream" of the iomux0 pinmux. The
documentation for the SoC provides no name for this device, but it is
used to swap pins between either GPIO controller #2 or select other
functions, hence the "gpio2" name. Add a driver for it.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pic64gx has a second pinmux "downstream" of the iomux0 pinmux. The
documentation for the SoC provides no name for this device, but it is
used to swap pins between either GPIO controller #2 or select other
functions, hence the "gpio2" name. Currently there is no documentation
about what each bit actually does that is publicly available, nor (I
believe) what pins are affected. That info is as follows:
pin role (1/0)
--- ----------
E14 MAC_0_MDC/GPIO_2_0
E15 MAC_0_MDIO/GPIO_2_1
F16 MAC_1_MDC/GPIO_2_2
F17 MAC_1_MDIO/GPIO_2_3
D19 SPI_0_CLK/GPIO_2_4
B18 SPI_0_SS0/GPIO_2_5
B10 CAN_0_RXBUS/GPIO_2_6
C14 PCIE_PERST_2#/GPIO_2_7
E18 PCIE_WAKE#/GPIO_2_8
D18 PCIE_PERST_1#/GPIO_2_9
E19 SPI_0_DO/GPIO_2_10
C7 SPI_0_DI/GPIO_2_11
D6 QSPI_SS0/GPIO_2_12
D7 QSPI_CLK (B)/GPIO_2_13
C9 QSPI_DATA0/GPIO_2_14
C10 QSPI_DATA1/GPIO_2_15
A5 QSPI_DATA2/GPIO_2_16
A6 QSPI_DATA3/GPIO_2_17
D8 MMUART_3_RXD/GPIO_2_18
D9 MMUART_3_TXD/GPIO_2_19
B8 MMUART_4_RXD/GPIO_2_20
A8 MMUART_4_TXD/GPIO_2_21
C12 CAN_1_TXBUS/GPIO_2_22
B12 CAN_1_RXBUS/GPIO_2_23
A11 CAN_0_TX_EBL_N/GPIO_2_24
A10 CAN_1_TX_EBL_N/GPIO_2_25
D11 MMUART_2_RXD/GPIO_2_26
C11 MMUART_2_TXD/GPIO_2_27
B9 CAN_0_TXBUS/GPIO_2_28
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pinctrl binding patch for iomux0 mpfs adds a ref to itself to the
syscon/mfd mss-top-sysreg binding, and therefore needs that file to
exist.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCaPez8QAKCRB4tDGHoIJi
0tgYAP9KAOQ/zMPyEPViByRoyQx1xjuMR88xQ5LvfsYcV3M6jgD8C9H73smi7Q64
j7l5ybzz/hhxLl2FrsgFK3PMSzvo5QI=
=6Fxl
-----END PGP SIGNATURE-----
Merge tag 'mpfs-pinctrl-binding-base' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into devel
mpfs pinctrl binding base
The pinctrl binding patch for iomux0 mpfs adds a ref to itself to the
syscon/mfd mss-top-sysreg binding, and therefore needs that file to
exist.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Referenced pinmux-node.yaml schema already defines type for "functions"
so $ref is redundant.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This callback was undocumented, add the docs.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
"mss-top-sysreg" contains clocks, pinctrl, resets, an interrupt controller
and more. At this point, only the reset controller child is described as
that's all that is described by the existing bindings.
The clock controller already has a dedicated node, and will retain it as
there are other clock regions, so like the mailbox, a compatible-based
lookup of the syscon is sufficient to keep the clock driver working as
before, so no child is needed. There's also an interrupt multiplexing
service provided by this syscon, for which there is work in progress at
[1].
Link: https://lore.kernel.org/linux-gpio/20240723-uncouple-enforcer-7c48e4a4fefe@wendy/ [1]
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add csus_mux for further use as the csus clock parent, similar to how the
cdev1 and cdev2 muxes are utilized. Additionally, constify the cdev parent
name lists to resolve checkpatch warnings.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is no reason to print any "hello world" from pin control
unless (maybe) if we are debugging.
Drop the banner.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a compatible for the LPASS LPI pin controller on QCM2290. It seems
to be compatible with sm6115 LPASS pinctrl.
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Srinivas Kandagatla <srini@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for Kaanapali TLMM configuration and control via the pinctrl
framework.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Top Level Mode Multiplexer (TLMM) in the Kaanapali SoC provide GPIO and
pinctrl functionality for UFS, SDC and 217 GPIO pins.
Add a DeviceTree binding to describe the Kaanapali TLMM block.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert the marvell,armada3710-(sb|nb)-pinctrl binding to DT schema
format. The binding includes the "marvell,armada-3700-xtal-clock"
subnode which is simple enough to include here.
Mark interrupt-controller/#interrupt-cells as required as the users have
them and the h/w is either capable of interrupts or not.
As this syscon has 2 register ranges, syscon-common.yaml needs to be
updated to drop the restriction of 1 register entry.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert the Marvell/Synaptics Berlin pinctrl binding to DT schema
format. The "reg" property was not documented for the newer SoCs.
Otherwise, it's a straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Mark the gpio/egpio as GPIO specific pin functions, othewise
the pin muxing generic framework will complain about the gpio
being already requested by a different owner.
Fixes: 87ebcd8baebf ("pinctrl: qcom: Add glymur pinctrl driver")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The platform specific configuration is already passed on to the generic
msm probe. So it's useless to exist in the match table next to the
compatible. So drop it from match table.
Fixes: 87ebcd8baebf ("pinctrl: qcom: Add glymur pinctrl driver")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Rename the GPIO controller node from "msmgpio" to "tlmm" to match the
convention used by other Qualcomm SoCs.
Suggested-by: Shinjo Park <peremen@gmail.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the "ti,am62l-padconf" compatible to allow for some changes in the
driver in the future when needed.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add driver support for the pin controller found in the MediaTek
Dimensity 7300 (MT6878) SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
MT6878 uses different debounce times than other SoCs. Add them to the
EINT driver.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add device-tree bindings for the pin controller and the EINT controller
found in the MediaTek MT6878 SoC.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next.
-----BEGIN PGP SIGNATURE-----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=b0xy
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next"
* tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: boardinfo: Annotate code used in init phase only"
reserved and accessing reserved register space could result in undefined
behavior
- Fix a function's retval check in aspeed-scu-ic
-----BEGIN PGP SIGNATURE-----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=dVwm
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Skip interrupt ID 0 in sifive-plic during suspend/resume because
ID 0 is reserved and accessing reserved register space could result
in undefined behavior
- Fix a function's retval check in aspeed-scu-ic
* tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume
irqchip/aspeed-scu-ic: Fix an IS_ERR() vs NULL check
The previous fix to trace_marker required updating trace_marker_raw
as well. The difference between trace_marker_raw from trace_marker
is that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings.
This is for applications that will read the raw data from the ring
buffer and get the data structures directly. It's a bit quicker than
using the ASCII version.
Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:
- Fix tracing_mark_raw_write() to use per CPU buffer
The fix to use the per CPU buffer to copy from user space was needed for
both the trace_maker and trace_maker_raw file.
The fix for reading from user space into per CPU buffers properly fixed
the trace_marker write function, but the trace_marker_raw file wasn't
fixed properly. The user space data was correctly written into the per CPU
buffer, but the code that wrote into the ring buffer still used the user
space pointer and not the per CPU buffer that had the user space data
already written.
- Stop the fortify string warning from writing into trace_marker_raw
After converting the copy_from_user_nofault() into a memcpy(), another
issue appeared. As writes to the trace_marker_raw expects binary data, the
first entry is a 4 byte identifier. The entry structure is defined as:
struct {
struct trace_entry ent;
int id;
char buf[];
};
The size of this structure is reserved on the ring buffer with:
size = sizeof(*entry) + cnt;
Then it is copied from the buffer into the ring buffer with:
memcpy(&entry->id, buf, cnt);
This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.
The allocated space is actually more than what is copied, as the cnt
used also includes the entry->id portion. Allocating sizeof(*entry)
plus cnt is actually allocating 4 bytes more than what is needed.
Change the size function to:
size = struct_size(entry, buf, cnt - sizeof(entry->id));
And update the memcpy() to unsafe_memcpy().
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaOq0fhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qr4HAQCNbFEDjzNNEueCWLOptC5YfeJgdvPB
399CzuFJl02ZOgD/flPJa1r+NaeYOBhe1BgpFF9FzB/SPXAXkXUGLM7WIgg=
=goks
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"The previous fix to trace_marker required updating trace_marker_raw as
well. The difference between trace_marker_raw from trace_marker is
that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings. This
is for applications that will read the raw data from the ring buffer
and get the data structures directly. It's a bit quicker than using
the ASCII version.
Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:
- Fix tracing_mark_raw_write() to use per CPU buffer
The fix to use the per CPU buffer to copy from user space was
needed for both the trace_maker and trace_maker_raw file.
The fix for reading from user space into per CPU buffers properly
fixed the trace_marker write function, but the trace_marker_raw
file wasn't fixed properly. The user space data was correctly
written into the per CPU buffer, but the code that wrote into the
ring buffer still used the user space pointer and not the per CPU
buffer that had the user space data already written.
- Stop the fortify string warning from writing into trace_marker_raw
After converting the copy_from_user_nofault() into a memcpy(),
another issue appeared. As writes to the trace_marker_raw expects
binary data, the first entry is a 4 byte identifier. The entry
structure is defined as:
struct {
struct trace_entry ent;
int id;
char buf[];
};
The size of this structure is reserved on the ring buffer with:
size = sizeof(*entry) + cnt;
Then it is copied from the buffer into the ring buffer with:
memcpy(&entry->id, buf, cnt);
This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.
The allocated space is actually more than what is copied, as the
cnt used also includes the entry->id portion. Allocating
sizeof(*entry) plus cnt is actually allocating 4 bytes more than
what is needed.
Change the size function to:
size = struct_size(entry, buf, cnt - sizeof(entry->id));
And update the memcpy() to unsafe_memcpy()"
* tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Stop fortify-string from warning in tracing_mark_raw_write()
tracing: Fix tracing_mark_raw_write() to use buf and not ubuf
- Fix UAPI types check in headers_check.pl
- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
- Ignore fsync() error when output of gen_init_cpio is a pipe
- Several little build fixes for recent modules.builtin.modinfo series
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaOqyGgAKCRAdayaRccAa
lhIaAP4owzRbZv/KnwVgXt3IDlAN7tOJQyiNbuAOTTH9IewvhAEA24zfrlav7CQl
WSc0d/poWAdmQJc0T/bdQ71G69j6dgQ=
=ljuS
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Fix UAPI types check in headers_check.pl
- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
- Ignore fsync() error when output of gen_init_cpio is a pipe
- Several little build fixes for recent modules.builtin.modinfo series
* tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Use '--strip-unneeded-symbol' for removing module device table symbols
s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections
kbuild: Add '.rel.*' strip pattern for vmlinux
kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux
gen_init_cpio: Ignore fsync() returning EINVAL on pipes
scripts/Makefile.extrawarn: Respect CONFIG_WERROR / W=e for hostprogs
kbuild: uapi: Strip comments before size type check
This reverts commit 1a2b423be6a89dd07d5fc27ea042be68697a6a49 because we
got a regression report and need time to find out the details.
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/r/29ec0082-4dd4-4120-acd2-44b35b4b9487@oss.qualcomm.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
before or during the merge window. The most important one is the
qla2xxx which reverts a conversion to fix flexible array member
warnings, that went up in this merge window but which turned out on
further testing to be causing data corruption.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaOpnUhsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIUCFQEA1cADof79U9suDka2hAa2l7D4wJQ53qSj
R7CwarAVX2wA/3RaEHySnSk+ivyHRl5AOYlPrYsnBo1o2KUq1M6kfviM
=itgd
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
before or during the merge window.
The most important one is the qla2xxx which reverts a conversion to
fix flexible array member warnings, that went up in this merge window
but which turned out on further testing to be causing data corruption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Include UTP error in INT_FATAL_ERRORS
scsi: ufs: sysfs: Make HID attributes visible
scsi: mvsas: Fix use-after-free bugs in mvs_work_queue
scsi: ufs: core: Fix PM QoS mutex initialization
scsi: ufs: core: Fix runtime suspend error deadlock
Revert "scsi: qla2xxx: Fix memcpy() field-spanning write issue"
scsi: target: target_core_configfs: Add length check to avoid buffer overflow
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled kernels
in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
-----BEGIN PGP SIGNATURE-----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=3Otb
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 updates from Borislav Petkov:
- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...
version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support for
various instruction mnemonics now that the minimum assembler version
supports them all
- The usual cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=dW6J
-----END PGP SIGNATURE-----
Merge tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- Simplify inline asm flag output operands now that the minimum
compiler version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support
for various instruction mnemonics now that the minimum assembler
version supports them all
- The usual cleanups all over the place
* tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove code depending on __GCC_ASM_FLAG_OUTPUTS__
x86/sgx: Use ENCLS mnemonic in <kernel/cpu/sgx/encls.h>
x86/mtrr: Remove license boilerplate text with bad FSF address
x86/asm: Use RDPKRU and WRPKRU mnemonics in <asm/special_insns.h>
x86/idle: Use MONITORX and MWAITX mnemonics in <asm/mwait.h>
x86/entry/fred: Push __KERNEL_CS directly
x86/kconfig: Remove CONFIG_AS_AVX512
crypto: x86 - Remove CONFIG_AS_VPCLMULQDQ
crypto: X86 - Remove CONFIG_AS_VAES
crypto: x86 - Remove CONFIG_AS_GFNI
x86/kconfig: Drop unused and needless config X86_64_SMP
preserve vmalloc allocations across handover.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaOmDWAAKCRDdBJ7gKXxA
jh+MAQDUPBj3mFm238CXI5DC1gJ3ETe3NJjJvfzIjLs51c+dFgD+PUuvDA0GUtKH
LCl6T+HJXh2FgGn1F2Kl/0hwPtEvuA4=
=HYr7
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-10-10-15-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more updates from Andrew Morton:
"Just one series here - Mike Rappoport has taught KEXEC handover to
preserve vmalloc allocations across handover"
* tag 'mm-nonmm-stable-2025-10-10-15-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib/test_kho: use kho_preserve_vmalloc instead of storing addresses in fdt
kho: add support for preserving vmalloc allocations
kho: replace kho_preserve_phys() with kho_preserve_pages()
kho: check if kho is finalized in __kho_preserve_order()
MAINTAINERS, .mailmap: update Umang's email address
All singletons, please see the changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaOmCTwAKCRDdBJ7gKXxA
jtQZAQC9sRd+4LNYothoXlY9avKNYR4YvN3ogiIFJqHwiENu/QD/ec/57KME9dA4
H4SqK/49Rs/tVCYmkPTO7IWRmxo9/AA=
=h9On
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-10-10-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 hotfixes. All 7 are cc:stable and all 7 are for MM.
All singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-10-10-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: hugetlb: avoid soft lockup when mprotect to large memory area
fsnotify: pass correct offset to fsnotify_mmap_perm()
mm/ksm: fix flag-dropping behavior in ksm_madvise
mm/damon/vaddr: do not repeat pte_offset_map_lock() until success
mm/rmap: fix soft-dirty and uffd-wp bit loss when remapping zero-filled mTHP subpage to shared zeropage
mm/thp: fix MTE tag mismatch when replacing zero-filled subpages
memcg: skip cgroup_file_notify if spinning is not allowed
